AxisAndOhs Support

Hello there. It’s my first time here. I bought Axis and Ohs and it has been working very well in my Aerosoft CRJ when it comes to buttons and the honeycomb equipment. However, I haven’t been able to make my 2 radio saitek work at all; I have tried looking for solutions by watching videos but haven’t been able to come up with a solution. I would appreciate help with this problem. Thank you!

Hi everyone, did anyone yet figure out how to map the Throttle of the new Helicopters (the Bell 407 in this case) to an axis? I tried all kind of Axis for Throttle, Prop and what not and did not figure it out yet. Any VARs I could look out for? Thank you very much 🙂

Hello ! I bought a Behringer X-Touch Mini and am trying to set up the rotary knobs. I'll try to understand AAO programming. How did you manage to set the altitude, speed, vertical speed and direction knobs so that they change the value in both directions?

Anyone have any insight into how to properly setup the throttle with reversers using the Honeycomb Bravo and Fenix A320? I'm really trying to avoid using any MSFS control configs and this one has me pulling my hair out - couldn't seem to find anything online that helps. Thanks in advance

Hello, could you please help me out with simple RPN Script, for switching between PMDG Tcas values? I need to switch (L:EVT_TCAS_MODE) which is: (>K:#70432) between static values 0 and value 4. I am aware of example with PMDG switching between 0 and -1, but that won't help in this scenario.

Hello, Sorry for bothering with what seems like such a basic question, but I cannot get the Stream Deck to talk to AAO and the Sim. AAO version: 2.81 b05 Stream Deck Version: 6.02.17735 Windows 11. Sim Version: Latest version, all updates done. The Stream Deck functions normally in Windows with the current software. I have the Lorby-SI AxisAndOhs plugin installed on the Stream Deck I have a simple profile installed for the C172. I have added a connection status button to this profile as well. It does not show any connection with the sim. I have checked that AAO's is running as Administrator At times I have clicked…

Hello, Just a quick question re the livery and master/clone status. I set up a config (TCA Joy plus Throttle, X-Touch, Streamdeck) on the generic FenixA320. I then loaded a new livery. Once loaded the (same plane) with the new livery did not show the red bar on the top which indicated the link to the master. I then simply went to templates----}Apply Other config to this aircraft and the config was loaded (as a separate config). How do I make this new livery a clone?

I'm using the slider on the X-Touch Mini as a landing gear lever. I have set up 3 detents with the following outputs: Detent 1: Output 0 - Down position. Detent 2: Output 64 - Off position if required. Detent 3: Output 127 - Up position. The output of the slider (0 to 127) is assigned to a variable L:Gear_LV_Pos. I am then running the following script (just the UP and DOWN positions for the TBM) every 1000ms as an aircraft automated script: (L:Gear_LV_Pos)·0·==·if{1·(>K:GEAR_DOWN)} (L:Gear_LV_Pos)·127·==·if{1·(>K:GEAR_UP)} Is this the correct way to do this, or is there a better way? Thanks, Daz

Hi Lorby, i use your software ( MSFS2020 ver.2.80) and at the moment when AAO starts, it diconnect and reconnect 2 of 5 USB controllers several times. The " nice " WINDOWS sound is played. I tried several USB ports at PC, install then a ext. powered USB hub. Nothing changed that behaviour. The same was with ver. 2,70. WIN 10 in use and all power savings for USB are disabled in Windows. What is crazy is that AAO was working fine a few days ago (2.70). If i start windows only , all USB controllers are present and never disconnecting by themselves. At least if have no idea now..... Is there any kind of logfile what can help to isolate this fau…

Hello, I am using the Logitech G Saitek Pro Radio Panel with the Fenix A320, via AAO. The radios work perfectly, but I cannot get the transponder and QNH to work properly (on the XPDR position). If I change the transponder code or QNH in the Sim, they update on the Radio Panel, but I cannot set them via the Panel. AAO 2.81 b05 Saitek panels enabled, single click setting. Thanks for any advice.

Hi, is it possible to switch between combos? My example with buttons: Button A: "combo A" Button B: "combo B" Buton E: "when combo A is toggled ON decrease HDG BUG" OR "when combo B is toggled ON decrease SPD VAR" Button F: "when combo A is toggled ON increase HDG BUG" OR "when combo B is toggled ON increase SPD VAR" Now when I want to switch between decreasing or increasing HDG BUG or SPD VAR I have to press (considering combo A is toggled ON): Button A (to toggle OFF combo A) > Button B (to toggle ON combo B)... My goal is to only press Button B which also toggles off combo A, not having to press toggle off comb…

Hi, I dont know what I am doing wrong but recently, AAO wont start as an app. I have installed the latest version, am opening it as administrator and have created a firewall rule to no avail. I only use it for its gauges on Stream Deck but unless the app opens, I cant activate the gauges. Can someone please help. I am at my wits end. Possibly solved: I reluctantly tried a solution online involving changing two registry settings which seems to have fixed the problem. Still begs the question why it was only preventing AAO from running as a program.

Hi, Does anyone know the command to activate to toggle the Parking Brake and the Auto Throttle on the WT Longitude AAU1? The local variables available are (L:WT_LNG_PARKING_BRAKE,·Number) and (L:WT_Longitude_Autothrottle_Status,·Number). The Parking Brake is 0 or 1, and the Auto Throttle is 0 or 3 according to the watched variables. However, writing these values in a script has no effect. TIA, Daz.

I am trying to use a rotary knob on a WinWing Orion throttle base to control the throttle on the new MSFS FlyInside Bell 206. Each click of the knob basically acts as a button press. Button 83 for clockwise movement and button 82 for counterclockwise. I have it mapped in AAO to the HELICOPTER_THROTTLE1_INC and HELICOPTER_THROTTLE1_DEC respectively. The note for the command says it will increment/decrement the throttle by 1/128. What I am finding instead is that it increments/decrements in 10% increments. Is there perhaps a script I could use instead that would change the sensitivity to 1%? Scripting isn't exactly one of my strong suits. Thanks,

Hello, I can´t change the WebAPI Ports, the program always crashes without error message. Does anyone have the same problem? How can i solve this problem? Greetings from Germany Oliver

Hello @ll, the Hotfix version 2.81 b05 of AxisAndOhs has just been uploaded to SimMarket and JustFlight. Once it has been deployed to your account there, download and simply install "over" your existing AAO install. Make sure that neither AAO itself nor the simulator are running at that point. This version is all about fixing bugs: - Bugfix: RPN: Scripts with A:/E:/P: variables in them were not initialized fully every time - Bugfix: RPN: Scripts with A:/E:/P: variables in them sometimes would not "fire" on the first call. - Bugfix: RPN: "+" option is missing for "!...f!" string format - Bugfix: RPN: Selecting certain variables from the treelist causes a…

Elgato recently released "Stream Deck +" with four rotary encoders: https://www.elgato.com/en/stream-deck-plus It would be awesome if the AAO plugin could support these encoders for Nav, Comms etc. I happen to own one already, so if I can help with testing or anything else please let me know :)

Upgraded to 2.81b05 this morning. AAO does'nt seem to listen on the WebAPI port to receive connection from StreamDeck. I usually set my port to 19080 and monitor sockets using tcpview but I dont see it 'listening' at port 19080 When I go to Change WebAPI to try to set localhost and set port, pressing apply give a pop up "Error when saving changes: Value cannot be null" Paramter name: oldValue

Hello @ll, there is an unfortunate bug in the version 2.80 of AxisAndOhs concerning RPN scripts When you are reading from an A:, E: or P: variable in your script, the script may not be fully initialized in some situations. So it will be working partly or not at all, depending on how it is called. Example: “(A:MAGNETIC COMPASS, Degrees) (>K:HEADING_BUG_SET)” The only real work-around at the moment would be to put "(SIMPROC)" at the beginning of your script. This will be fixed as soon as possible with a new AAO version 2.81.

I have installed a X-Touch Mini in AAO (v2.80 b29) and enabled MIDI devices in the Hardware menu. The device appears on ID:1 on MIDI IN and ID:3 on MIDI OUT. I have followed the instructions to set up the x-touch mini from this youtube lesson. The mini panel appears both as a desktop FIP and web FIP in MSFS. However, there is no response to the physical x-touch mini. I would appreciate any trouble shooting advice. Thank you, Raj

I am ready to purchase LAAO, but in using the Demo version, I do not see (or know) how to assign Xbox controller buttons in LAOO Assigned Buttons. Can someone help please? EDIT: Sorry for my post I believe I just figured it out - hopefully my problem is solved. However being brand new to LAAO I have a lot to learn and still many questions (to follow)

I am experiencing a lot of A&O app crashes with V2.80. No error message, just an app exit. Mainly when editing/testing scripts and recently trying to add an axis mapped to vJoy. The scripts were simple MIDI commands for the XT Mini LEDs and layer changes. I also tried to change an existing axis assignment from AXIS_ELEVATOR_SET to NONE and replace with a vJoy axis, but the AXIS_ELEVATOR_SET just kept coming back and I had to delete the axis completely and re-assign. I am running the app as administrator. Simply testing the following single line script will exit the app: (>MIDI:3:PrgChng:1:1) This is in OFFLINE mode. Will this make a diff…

Hello @ll, AxisAndOhs version 2.80 build 29 has been uploaded to the shops. It is already available on SimMarket, JustFlight should also deploy it in the next couple of days. The most important change is in the MSFS version - the InGame Panel is now part of the installer, so it will always be there in MSFS (just not active unless you make it so). Please refer to the AAO manual as to what this panel can do (open/close other panels, display web pages, and, most importantly, handle the direct access to the MSFS BVars, making the LVar mappings obsolete!) Also, there is a new version 14 of the StreamDeck plugin, that now fully supports the StreamDeck "+" too. …

Hi, I was wondering if anyone has written a script/profile for the DC Designs Concord MCP Selectors, namely The HDG/TRK Selector, Speed Selector and Altitude Selector. I have tried to get them to work via RPN scripting, mainly I'm having trouble identifying which ones they're tied to, however, no success so far. I have managed to implement some of the other switches from a streamdeck profile available on the .to site. but having a little trouble with the above. failing that anyone willing to share a profile for the above selectors perhaps. kind regards, T

I found an issue with this 2.80. Commands (or streamdeck command) binded to a personal script doesn't run until I force the script execution by AAO program (Scripting/RPN Scrips Editor/Sel Script Group/Sel Script title/Test). Once executed directly by AAO program, then magically the HW (or streamdeck) binding on that RPN Script, runs! The issue can be triggered also when script is written in "S" fields of AAO streamdeck plug-in commands. hope I reported the issue good enough to be understood, but if it's necessary, I might produce a video. Peppuzzo