AxisAndOhs Support

After downloading and unzipping the StreamDeck plugin the file com.lorbysi.... does not act as a plugin file but Windows asks me to select a file for opening the plugin. Strange that the icon of the file shows a sheet of paper and not he plugin icon. Any idea about what goes wrong? Kind regards Klaus

I know how to send Midi Messages to my X-Touch Mini to control the LEDs according to Panel State like this: (L:I_FCU_EFIS1_LS, number) 1 == if{ 1 (>MIDI:4:NoteOn:1:9) } els{ 0 (>MIDI:4:NoteOn:1:9) } Unfortunately this doesn't take the activated Layer of the X-Touch Mini into account. Therefore, for instance, LEDs that are activated by Scripts on Layer A will still stay illuminated when I switch to Layer B of the X-Touch Mini. Is it somehow possible to know from Axis and Ohs which Layer of the X-Touch Mini is currently activated (maybe because the LED of the corresponding Layer Button is lit), so that I could add another condition to my LED Scripts?

Hello I get HTTP ERROR 404 from Edge when calling pmdg737fmc Today I installed the latest version (demo) of Axis and Ohs. Then I installed and configured the latest version of pmdg737fmc exactly according to the documentation. Everything looks fine. PMDG 737-800 is recognized. 2 scripts are there. Finally, when I call http://localhost:9080/webapi/pmdg737fmc/index.html I get HTTP ERROR 404 from Edge. How can this be fixed?

Hello, my try to find the G1000 javascript file within the fs2020 files - as written in our manual- was not successful. That means G1000 PFD/MFD have other solutions and it is not possible to use the same technique like CJ4 MDCU. Thx Reiner Müller

I found out the regular MSFS keybindings for VS/ALT,HDG and so on do not work with the fenix Airbus. Is it possible to do this via Axis and Ohs (don't wanna use my mouse wheel). I just need the usual buttons on my keyboard to do the job for increasing and decreasing the values.

Just want to post one item which did cost me some time to find out: If you want to use the following SHIFT combinations with virtual keys in AAO you must turn off the numpad or it will not work and you will get the function of the numpad keys. SHIFT LEFT SHIFT RIGHT SHIFT UP SHIFT DOWN SHIFT POS1 SHIFT END SHIFT PAGEUP SHIFT PAGEDN SHIFT INSERT SHIFT DELETE This is only for a combination with the SHIFT key, all other worked also with the numpad turned on. This is not related to AAO, but how the virtual keys are processed.

Hello, I cannot get the Management Control for WebFips to show up when using the following IP in Google Chrome: http://192.168.178.41:8080/webfips according to the AAO manual. I have tried port 6080 as suggested but no luck. AAO is running as Admin and the two FIP:s in "Gauges" are ticked. The LorbySi:s two folders FipPanels and Hooks are installed in my Community folder. I intended to show "Funactics" X-touch panel in VR but I suppose I need to get the Management Control up and working for that. All other scripts works like a charm in AAO like the X-touch panel. Need some help as I am now 81+ 🙂 Best from Sweden Bjorn Harlin

I'm getting issues pretty often where certain controls randomly won't work. Generally it's the throttles and many of the buttons and keys, and I'll have to disconnect and reconnect AAO several times to get it to work. Once their working, they'll contue working until the next restart, but I've no clue what's going on! Today, I was using my joystick trigger to release parking brakes, and it somehow triggered a keyboard command I have for wing lights. See attached video. In the video I'm pressing the joystick button 0 and it's also having the Shift+W command initiated as well. The other commands are working. https://youtu.be/QfhToZVEN2g

Using AAO with an X-Touch mini. Have it set up just fine with all the knobs and encoder buttons assigned to various Garmin knobs and buttons along with radios. In MSFS, everything works great...for a while. Randomly, AAO stops working! After a minute or two, it might start working again but more often than not, it stops working again after a minute or two. Rotaries and buttons aren't being picked up by AAO. This is across multiple aircraft / templates. Initially I thought it was a problem with the X-Touch, but I don't think this is the case as I can see the rotary leds light up when I move them and when flying X-Plane, X-Keypad does not experience any such interruptions.

Does AAO support input devices with more than 32 buttons ? Looking at using the Leo Bodnar BBI-64 but the product page advises that some software do not support more than 32 buttons per device. Thanks in advance.

I can't get my arduino to communicate with AAO the com ports are OK and Enable Web API is valid. No problem with StreamDECK. Help me please ( Firewall and Antivirus is desabled )

Hi, First of all loving the software for getting the Fenix A320 and my hardware talking. I spent a couple of hours binding everything exacty how I wanted it. Fired up the Sim today and the bindings have all loaded but the events from the VPC switch aren't being read. I believe it's slight enumerated my VPC panel name but when trying to use replace hardware I have nothing in the list to be replaced. Anything I can do to avoid rebinding everything again?

Hello @ll, I’ve just uploaded another (free) Bridge app to the AxisAndOhs Weebly website (bottom of the Downloads page) This bridge is for generic HID devices. So if you have exotic hardware (GoFlight and the likes), where the actual communications protocol is unknown, but that Windows picks up as HID devices, you can try them with the Bridge to see if button presses can be read and transmitted to the AAO WebAPI. This is currently strictly for incoming events, there is no option to write data back to the device (= displays and LEDs will stay dark). Please make sure to read the included PDF before starting.

Good evening, I have a midi controller in the mail currently that I've been preparing to setup. I've been working through the different ways to apply it and your tool came up with functionality that appears to not be supported directly through existing keybinds. I've downloaded the demo version of the application and connected it this evening with a console controller to start messing with it. The controller works without any issues for drone camera functions. Just to be sure I removed all key binds that included any of the test keys. Long story short, I've selected 4 possible functions from the drop down, assigned them to 4 different buttons on the controller,…

Hello, I am really happy with AAO, works fine! But I have a problem: I can not "Read LVars from Sim". I always get "Collection failed" after a few seconds. Sim is connected with the correct plane (Asobos Cessna 172). Importing HVars (sim disconnected) is no problem ("Variables collected!"). MSFS 2020, AAO 2.26 b04 (paid). I tried it with and without admin mode. I had deinstalled the demo version and removed all directories. Maybe this has something to do with it: "Watch simulator events" never shows any events, the list remains empty. "Watch simulator variables" is working fine. Does anyone have an idea? Thanks in advance.

HI, I'm very happy with AAO on MSFS 2020, and using the VRI to Combo bridge, I've been able to program all the buttons and rotary on my Combo II Boeing version. The only thing I'm really not able to have, are the data on the MCP display, coupled with the data on the sim. The only parameter shown in the correct way, is the QNH, it moves turning the baro knob and following the one shown on the sim. SPD, HDG, ALT and V/S, are fixed to zero, although they have a correct interaction with the sim, in fact, turning relatives knobs, has the correct effect in MSFS, but without feedback on the MCP display. Is it a known limitation, or I'm missing something (trie…

Hi, Have noticed something that I think may be a bug but could also be user error. When an instrument is scaled either in the desktop instruments form (or by adjusting the corners of the form) the cursor for an area does not adjust / resize along with the rest of the form. The area continues to work and the click events are all still activated in the correct place but the cursor moves / disappears depending on how much the instrument is reduced in size So for instance, if the area defined below is defining an area on an instrument 500 x 200 in size and over an image of a button you would expect the area and associated cursor to be active in the top left of…

Hi, I have a strange problem I cant resolve. The variable for the MSFS PMDG heading window (L:ngx_HDGwindow,Number) works just fine in the Observe Variables window but when I include it in a guage XML script as per below it makes the desktop FIP window loads as just a black window and the application hangs. Can you advise where I am going wrong? <Element> <Position X="570" Y="66"/> <GaugeText> <FontFace>Bahnschrift Semi-Bold</FontFace> <FontHeight>40</FontHeight> <FontColor>0xfbf8f4</FontColor> <HorizontalAlign>Right</HorizontalAlign> <Value&g…

Is it possible to have one key do a toggle without scripting? I'm working with the Captain Sim 757, and I want Shift+T to toggle the taxi light, one push does value 1 next push does value 0, etc. The taxi light switch is a local variable called "L:O12_006_SW2". I've already made a working script for this, but is there a more obvious way just using the already available settings? I just didn't want to have to repeat this numerous times.

Hello @ll, there are two issues with version 2.51 when you are using the new RPN commands that operate vJoy assets: 1. When you are using scripts with the (VJ.. commands, there must be at least one "normal" AAO button assignment to a vJoy asset too. Otherwise the vJoy interface is not initialized. The button assignment doesn't have to be functional, it just has to reference any one vJoy button. 2. vJoy commands don't work with the "Test" button on the RPN Script Editor, they must be tested "live" with the control you were making them for (=StreamDeck, MIDI, Button assignment etc.). These items will be fixed in the next version

With your help I got the rudder issue fixed, but I've found another issue with the Thrustmaster. The breaking (both left and right) are behaving strangely. When I apply the breaks, the break peddles in the cockpit rotate as you expect until the peddle is fully deflected. At that point the peddles return to the non-braked position. IOW when the brakes are fully applied in the physical control, in the cockpit the breaks are fully disengaged. Do you have any idea why this happens?

Hello @ll, AAO 2.51 has been uploaded to the shops yesterday. SimMarket has already deployed it. We got an automated reply from JustFlight that they are on holiday at the moment, so it may take another couple of days until the update is available to JustFlight customers. - Change: AAO now has an interface to work with vJoy. With that you can send virtual joystick button events or axis to other apps with AAO Axis or Button assignments. For example, you can trigger MSFS features that are only available in MSFS controller assignments (=the camera controls) using a vJoy device instead of keyboard keys As another example, in Offline Mode you c…

Just downlaoded the demo today to see if the software could do exactly what I wanted, and I was excited to see that it did! I was going to purchase the software to begin using it fully and suddenly the demo won't even open. The startup log is normal.. 14-Sep-22 14:06:45.437 : Sound folder set: C:\Users\*****\Documents\LorbyAxisAndOhs Files\Sounds 14-Sep-22 14:06:45.438 : Scripts folder set: C:\Users\*****\Documents\LorbyAxisAndOhs Files\Scripts 14-Sep-22 14:06:45.438 : Web server folder set: C:\Users\*****\Documents\LorbyAxisAndOhs Files\WebPages 14-Sep-22 14:06:45.438 : Screenshot folder set: C:\Users\*****\Pictures\Microsoft Flight Simulator 2020 Files 14-Sep…

I'm having an issue with my setup for my Thurstmaster rudder control. It has been a while since I've run MSFS. When I tried recently the rudder would not work, and when I looked at AAO, AA0 mad some changes to the config, but these changes don't work either. When I exercise the rudder peddles the "Move Joystick axis" changes to "Slider 0" and the value under the field goes from about 65000 (when the peddles are centered) to 0 (when the peddles are fully moved back on the right.) Moving the peddles from centered to fully back on the left does not change the value under the field at all, i.e., it remains at about 65000. This is reflected in the cockpit by the peddles a…

I'm using Behringer x-mini to assign controls for the Fenix a320 in MSFS with AAO, it assigns no problem, but if I want to change or delete the assignment ( in the change button assignment ) it won't save. I'm stuck with a configuration profile I can add to but not change? Any ideas why this would be?