ChasePlane Support

Hi, I recently received a simmarket gift voucher which I intended to use on ChasePlane, but quickly realised it's not yet available there. Does anyone know when It'll become available there, as I'd really like to get it? Regards, Afonso

Hi All All was working OK until 1.66, now nothing at all. Stuck in a cockpit view that does not move. cannot change cameras. It's broke :mad: Just reloaded P3D, not a thing, in fact Chase plane does not even auto load now. It's like it is not connecting or recognizing that the SIm is loaded or running. Hope it can get fixed for the weekend Thanks You can move all the controls (PAN, Tilt etc) in chase plane. The numbers change but nothing happens in the SIM

Hi guys; I searched here in the forum about it, and I didn't find anything about this. The question is: When I export all cameras from, let's say, -600 NGX for -700 NGX, all settings are exported, except the keyboard (and/or joystick) shortcuts. Is there a way to export the shortcuts together? I'm asking this because, let's say again I have 20 cameras in -600NGX, and I want to export these cameras to -700, -800, -900 and 777 and MD-11. In this example, if I have only keyboard shortcuts, I will have to assign 100 shortcuts again!! And if I have joystick shortcuts together, it will be a looong work!!! By the way, CP is getting better and better every update.…

Hi Guys, I've 2 problems The first ... How can I delete Camera settings??? The second ... Chase Plane don't recognize my mouse wheel, I can't Zoom and it is not possible to use the In-Sim View Selector inside the FSX Thanks for your help guys

Hello everyone, the issue started with version 0.1.59 and continues with 0.1.61. When changing back from outside view to inside view, the inside views are displayed in the outside model of the aircraft. All presets are then displayed in the outside model. Outside View works as it should. Picture for besser understanding with selected Captain preset:

Hey, when toggeling the outside view in chase plane via the airplane icon menu P3D is swithing to the top down view. Any ideas why? Thank you

Hi, In planes that are not horizontal on the ground, like C-47, how can I align the external views with the horizon when moving arround? Thanks AS

Hi, Nice program, except every time I start the sim, I have to reset all my views and buttons. I realize that this is an Alpha, but When I want to do a flight I don't want to spend another 30 to 45 minutes adjusting every thing again. How do I get it so all of my buttons work as before without Chaseplane? The default views as well. If I start FSX without Chaseplane, the joystick buttons respond erratically. I would like to mess around with the program when I don't fly. Thanks, Gnacino

Hi everybody, Flying the FSLabs A320 I noticed that the blast effect is not alligned with the engines. It's like if Chase Plane "sees" the engines more outboard than they are. I'm aware this is an alpha version, so I don't ask for a solution, but I just wanted to make you aware of this issue. PS: thankyou very much for your incredible job!

When I press the joystick button I have assigned to cinematic view, the view first changes to the Outside View. I have to press it again to actually get to Cinematic View. If I'm in Cinematic View and press the button again, it switches to Outside View. Before the last update, the button I have assigned to Cinematic Views would toggle me back and forth between views. Now it only goes to Outside View.

My mouse now freezes and the save camera profiles no longer respond after this latest update.

So i found a new thing that started after the second last update. After shut down P3D and CP, after a flight, without restarting windows/PC, CP doesn't start up and hangs. I did a flight, shut down P3D and CP, played BF1, started up P3D again, Started up CP but nothing happened after the splash screen. Closed it down thru task manager but after start up again nothing happened. I tried it a couple of times but gave up and restarted my PC and everything worked ok. Greets Roy

Hello, First of all I need to say it's a great add-on. The bug that I have is that when I want to use my mouse to scroll the speed or altitude bug or want to use it to do other things the frame rate drops. It's like the sim freezes. With the Aerosoft Airbus I haveca steady 50 to 60 frames but as soon I use my mouse the frames drop to 10/15 and the mouse doesn't go fluently to the place I want to point at. When I stop using my mouse the frames go back to 50/60. It also occurs with the PMDG 777 but the frames don't drop that much, from 45/50 to 25/30. I did a lot of tests and it only occurs when CP is active. Windows 10 64bit Asus Maximus HeroVIII Asus GTX 1…

After the last update everything stopped working for me. I can't change views, keyboard assignments (move left, right , up, etc) are not working. I can't adjust cameras. My presets are still there but nothing is working. All was fine until the latest update a few minutes ago. I even tried uninstalling and reinstalling but no luck. -

Even creating presets, when I choose an outside camera, it goes to the position but still inside, I need to right click on P3D, change for exemplo Spot view from outside and then select the preset. Why is this happening? Another thing, I'm using the axis from my joystick (Thrustmaster Hotas) for moving the camera around, I like to move the camera around in Spot or Locked Spot, I can only move it from side, not up and down, and always I can only see the bottom of the aircraft, when it's in the air. How can I fix it? When I installed it, I still had Ezdok installed, I wanted to do a fresh install, how can I do it?

My goodnight o'mighty Friday, I cannot believe I ever thought negatively about CP. I got an XBOX ONE 360 controller for Windows, for $25. Yes just $25, there were two on clearance at WM on a hanger with the little lock on it, I had an electronics guy get one of them for me and when I went to pay out it rang up $50. I said "Hold the reigns now, that was priced at $25 on the hanger it was on, I do not want it at that price." We went and looked, and it was, he asked the dept mgr and she noticed whomever had put the products there had not switched out the price, and said "Let him have it for $25" they removed the price off the hanger too. Anyhow, I struggl…

Hi. I don't know if it was an update or something I did but after Sunday morning If i select Outside it goes to the default Top-Down view. I did uninstall EZDOK as this was coming up in the menu description. but I think I did that before i had the issue. Any suggestions or help would be appreciated. Pete.

Hi! I am trying to assign shortcut keys for my presets.. Tried using the general "reset cam position" and also the direct assignment in the preset holding CTRL key. Once i press my mapped key, P3D changes view category from default "On-Board (chaseplane) to next category "cockpit" and panels disappear. Then when changing presets with my mapped keys, it stays in the "cockpit" category.. I have tried to comment out the "HotKeySelect=xx" in all other camera definitions except Chaseplane in my cameras.cfg, and also in the airplane "aircraft.cfg", but issue remains. Any ideas appreciated Freddy

Hi At the moment unless I am mistaken it is only possible to program an axis to one particular controller. This means that if you are using TrackIR for inside camera views you cannot then map an XBOX contoller axis to the outside views or even use the hat switch on a yoke. Having multiple axis for different views would make the system a whole lot friendlier. One other question is can different outside cameras be programed to a short cut per plane so that you can go straight to a specific camera are do you have to rotate through the views to the one you want. Thanks for the program it is looking very very promising at the moment. Ken

Good evening, Congratulations on the excellent program. Where I live, the internet is terrible, so I hardly use cloud services. So I humbly ask you not to forget users like me, who loves ChasePlane, but unfortunately does not have the best internet. So I ask you to study the possibility of inserting a button to export aircraft profiles. I saw that it is possible to import profiles, but not export. I know it's because of the philosophy of keeping everything in the cloud. But not everyone has the best internet to use. If you enter an option to export aircraft profiles, I can save the profiles of all my aircraft, and then import them to the chaseplane. Many thanks and…

I'm noticing a massive shaking of the camera caused by the acceleration turbulence slider when a floatplane is just gently swaying in the waves at the dock. Could you find a way to ignore the swaying in the waves for the acceleration turbulence? Maybe disable acceleration turbulence as long as the ground speed is zero?

Good evening 1st of all, thx for the great tool by FSFX Package. I would like to know if there are any available profiles to import easily for specific airplanes. Thanks,

Kevеn! Why should I after every running CP restore cameras configuration? I'm tired of it already. This product is still too crude to use it constantly. So I do not even ask, but demand to make a choice, install CP or not. Thanx.

Hi, I am using ChasePlane and so far its great but two things will make it better. 1) Can you allow a Right Mouse Click to open up the additional menu rather than just pressing CTRL. Depending on how your sim setup is laid out this can be a real pain to have to do. 2) Any way to speed up the speed of the panning when using the hat switch control assignments. The pan is very slow for me right now. thanks,

When I try chaseplane with an A2A plane that has the walkaround feature the outside view is at an angle and not showing the plane. Also the forward and aft controls are at an angle. When switch to outside view in chaseplane it selects one of the walkaround views and not the chaseplane one. screenshot here http://imgur.com/a/2ejFL I have no problem with other aircraft. I run prepar3d 3.4.