ChasePlane Support

Hi, since i installed CP, i have some problems with my camera, (all of them). Whenever i disabling HDR, my camera POV starts to zoom in weirdly, no clickable buttons, VC pixelated, here is a video. https://www.youtube.com/watch?v=gdW6HFo486s&feature=youtu.be And yes, iv'e been on P3D forums and spent my time there to search around as well posted a topic without further luck. So maybe this has to do something with CP (Unsure) Things iv'e done so far. Clearing shader cache Deleted camera.cfg Restart P3D (Twice) Restart PC Deleted prepar3d.cfg Thanks in advance.

Hi there, When I moving camera in PMDG B777, movement not be smooth, unlike AS A320. I use joystick HAT. Following video for explain the problem more:

Hi, I bought CP today and I am loving it. However, when I switch to an outside view, the model used by the aircraft seems to be the VC model. For example, the outside view with the PMDG NGX renders the VC and all the clickspots, wing(tips), but no fuselage, engines or tailplane. This happens with all my aircraft. I believe this is not correct behaviour, as even the preview video was using the outside view with the NGX. Help much appreciated! Max Edit: I uninstalled and the problem persists.

Ok so I've just installed and run a couple of times so far. I'm using version 0.1.33 and have found a couple of things.Not sure if its me or not,this would be quite possible . What i'm finding is that when clicking the middle mouse button I can bring up the menu ok but I cannot select any of the options they all seem dulled out and not selectable.My joystick bindings all work ok which is fine, as I can change views this way,but the only way I can create new views is to open the main chase plane window. Once the view is created If I minimise the main CP window the program shuts down if i'm in full screen mode and i then have to restart it. The new views are still there…

Hi simmers, Following I have noticed when flying and using Chaseplane. After approx 15 minutes in the air the flight deck display for unknown reasons changes to an outside view. When I put the mouse cursor on the screen it changes back to the original flight deck. Anyone any answers as to why and what to do? Thanks Dirk

CP not unload from processes when exit from tray. When press close window icon - all ok Need disable CP in SimDirector mode!!! Can not work properly middle mouse button.

Sorry for my bad english Now all views deleting and they need to be re-created. Why, if there is a ready-made. E.g. Aerosoft PBY Catalina It has a lot of devices located throughout the cabin. Create new species is not a good idea. Thank you.

Hello, Is there way when panning with the middle mouse button down and mouse to make the camera stop right where you stop moving the mouse? It seems like the camera continues to move in the direction I was going even after I've stopped moving the mouse. Is there something I need to change with inertia setting?

Hi, On your site is write : [email protected] 2 Once the message back to me Mail Delivery Subsystem ! tell me the email or send my message is urgent. Thank

Hi, i currently have issues with my views/presets, once i press Arrow Up my camera moves to the left. Arrow Up - Moves to the Left Arrow Down - Moves to the Right Arrow Right - Moves Up Arrow Left - Moves Down This occured while fixing Trackir. Tried to reinstall it without any success. Also, im getting imgur.com/a/b1dtP this view (Pilot in Command) as default when im importing ecs camera files The Roll is at 0 on every preset. Thanks in advance.

I apologize for a rather high level of subjective enthusiasm, but this software is a perfect combination of an art and a science! It substantially helps to view and explore the simulated world and it does it a beautiful way. And - here is the subjective part - this is the first time I am able to fully use my SpaceNavigator 3D mouse! It was not possible with ezdok. 3D mouse makes camera movement extremely easy and precise, exploring cool views or making screenshots was never so enjoyable, even for a busy A320 captain Roman http://lh3.googleusercontent.com/-5ayEToMGsBU/WB73TSGBGpI/AAAAAAAAIKM/HFIc6IHyfgUkRDEowI1lCDb_GnkyaWM7gCHM/s2048-no/2016-11-5_20-46-37-603.jpg http://…

Is there a way of grouping presets? I have set up 6 internal presets, I want 1 default preset which I can get to via button/key assignment. Then 2 presets that I can toggle between via button/key assignment. Finally 3 presets that I can cycle between via button/key assignment. Hope I'm making sense here - I don't want to have to cycle through all presets or have a button/key for each one. Cheers Mike

Hi, It would be interesting to add a up/down move function on the existing view list, so one is able to sort them in a convenient order when using the previous/next hotkey or buttons. Thanks,

Getting any sleep these days Keven lol doubt it with all these updates - great job - can you tell me how to get that on screen pie menu working I dont see it not sure if there is a switch to turn it on to access it ? thank you

Hi all I first wanted to ask for, eg, what you use for the 737 and 777 as turbulence settings. But in general, might be a good idea to give some inspiration. I read the manual etc, but somehow, it doesn't feel like I grasp the potential (yet) in regards to turbulence. wvkr Victor

I'm having an issue in the outside view with parts missing on the planes. These are the 172 and 182. The Commanche and Cherokee seem correct. The front wheel and strut is gone the back wheels are gone but the tire textures remain. The ailerons are black and there is nobody seated in the plane. The propeller is also missing with a gap between the cone and engine where the propeller should be. The walkaround works correctly. If I hit S or go to outside view via the P3D menu all the aircraft is represented correctly. Did I setup something incorrectly?

Hey everyone, ChasePlane just updated itself to v0.1.32 Alpha and it has rendered it useless. I won't except any keys.

Hello forums, since I installed my Flight1 GTN750 into my C172 ChasePlane doesn't recognize any of my keyboard keys when using the C172. I've tried to start is as administrator but that is not solving the issue. The only key, that is recognized is the CTRL-key, but I can not set any hotkeys for views or scroll through them with my keyboard-hotkey. I can use my joystick to look around though. What's wrong and would should I try? Using P3D 3.3 and the newest AccuSim Update and the newest Flight1 GTN750 Thanks, Marc EDIT: Just realized that this is a global problem with any aircraft. My keyboard is not recognized by ChasePlane, although it had in …

Hi seem to have an issue with panning I am using buttons not hat when I disable CP it pans left and right but when I pan up and down its very slow this is with no CP active it has somehow taken over the panning speed even when its not initialized I would assume the camera cfg file has changed as I see CP entries I always make these lines 100 I like fast panning after a fresh install of P3D on the vc and spot plane entries //PitchPanRate=100 //HeadingPanRate=100 Also how do you speed up panning in CP see nowhere to make changes - I see transition speed but that does nothing to speed up panning Maybe I am missing something can I in fact use panning with …

First of all - thanks, guys, for making this tool available at such an early stage! I have now V0.1.19 installed (Win10-64Bit, P3Dv3.4) I find it is not possible to change the focal setting of a camera, or any camera. All the other degrees of freedom work perfectly, it's just the focal length that's giving me trouble. This holds true on my machine for: Aerosoft A319 Majestic Q400 Pro A2A C172 FSUIPC full license installed, latest version Selected view by right-click: On-board (chaseplane) Something else I found, also concerning focal setting: After starting up the sim, I'm in cockpit view with a wide-view focal setting. If I switch to outside…

Hi, Sorry if this one has been already reported. Using the CP contextual menu, I'm only able to pick the buttons aligned horizontally beside the central point, below shown inside the red box. Maybe I missed something but unable to select the others menus.

Just feeling my way, assigned some joystick and keyboard buttons. When I went to 'outside' camera, about half the plane was missing. Went back to 'Fly now', different plane - the same. What am I doing wrong?

Just been trying this. 1. Import views from EZDOK file 2. Adjust Preset views. 3. Click green arrow to save 4. Change other Presets to suit Now, all is fine, allocate buttons as needed, I cannot allocate keys just yet :smile: Go to SIm menu to reload the 'same' aircraft' and the saved Presets have been reset back to the initial imported view. Also, go to outside view and then go back to an internal view(use your defined switch/button) and the view again has been reset to the initial imported view. Also, :smile: when you initially go to an outside view it point to the sky. Go back and then go outside again and all is well

I just installed chaseplane a few minutes ago. I removed ezdok, and I am now getting a p3d CTD without info in event viewer and p3d is saying "error creating child window." I've been running p3d v3.4 for a while without issues. The only other recent change I made was installing the BBS a330/340 package. I have made several successful flights with these prior to installing chaseplan. Any ideas?

Hi guys.... Seem to have a problem that has cropped up between this mornings update to 0.1.25 to this afternoons update 0.1.27. After the update this morning everything was working fine. This afternoon after doing a few things, I came back on, CP updated and now I have the following problem: When I turn the aircraft right while taxiing, the anticipation kicks in and throws me right out the front window , through the engine cover and almost into the prop blades. When I straighten out it comes back again. If I turn to the left, I am thrown all the way to the back of the aircraft. Somehow it seems the axis of movement for anticipation has changed. No chan…