ChasePlane Support

Not sure if it's just me but when I import presets from another plane it does not include turbulence effects? Also in order to get a copy of turbulence effects I have to add the camera with the effects first, copy effects and delete the camera. Not a huge issue but useful to have a way to copy just turbulence effects. One of the fixes in the latest version is to close ChasePlane on ecit of FSX but this does not work for me. Not a big problem tbh. When copying presets from another plane it doesn't include the shortcuts assigned to them - once again something for the future. I cannot wait until the community sharing feature is available as I'm pants at mak…

Hi, My PC- win7 64 . 16g memory- i7 2600- Gtx 980. Closure problem 'chaseplane' this is random, sometimes it quits but in reality it is still open in 'Task Manager' and you get an error if you want to launch the software. regards

Great program, love it, but the smothness while panning and moving is nowhere close to the smothness with EZDOK I achieve. I hope there are improvements possible on that matter. It's almost the same effect, like in default view system, whenn the panning hat was set in middle of the key repeat setting. McDan out

Wierd issue when I press the middle mouse button for the in game interface it shows up offset from the mouse location. I'm not sure if it is caused by my Monitor settings. IE: I press the mouse here X Interface shows here X Any ideas? Thanks

Hi After one of the updates I have been found the cinematic view is stuttering/zoom jerkiness. I've made sure the Disable smooth zoom is off/greyed out. Heres a link to a clip I made https://www.dropbox.com/s/i3auwtek5i06weu/2016-11-02%2015-22-40.mp4?dl=0 Any Ideas? thanks

Hi , http://cd91.eu/VideosChasseP/cp1.mp4

Greetings and many thanks for this fantastic edition to my Prepar3D_v3_Academic_3.4.9.18400. Just a couple of things.... I am having trouble lining up the HUD in the PMDG737NGX or rather I can line it up but I have to go a long way back to get it in the frame. The HUD itself always stays the same size as you move forward or back. If you move forward the hud moves away from its frame but moving back enables me to move it into the frame. I prefer to be closer in but with my ancient eyes I am having trouble reading it. I just finished a flight ksea to ksfo and on landing because I had a forward camera view I had the HUD on the windscreen without its frame, was not to ba…

Bonjour, 1/ When you have a lot of views to be programmed on the joysticks, it would be easier if in the menu 'presets' , for each view we can change their position 1 or 2 or 3, as one would wish. Currently whit 'ctrl' there is an cursor, but he allows only one moving up or down, this is not enough. 2/ it would be great if there were 2 options trimmings views: camera / movment and speed boost. when one has made a precise trimming for an external view, it is not suitable for internal views and vice-versa.

I only have P3D installed and although I uncheck the FSX Autostart option, I still get an error when starting Chaseplane saying "There was an issue with your Cameras.cfg file. Unable to check your camera references in FSX."

I've tried a couple of install/uninstall cycles and still having an issue with not correctly switching to an external view - I always get dumped into top-down view and none of the camera positioning controls work. The ChagePlane UI flashes green/blue and the camera selection appears to have changed but not in the sim. I would have expected that at some point during the install that camera.cfg would be modified to incorporate new views but this has not happened. So when I right click I see no OnBoard camera to select as I have seen in other postings. Can anyone post the relevant entries from thier camera.cfg file or does anyone know why my file is not being modifie…

OK so not a lot of people may know me but I stream on Twitch only GA aircraft mainly the A2A Comanche. I have used EZDok for such a long time and it's done its job well. But when I watched some videos about ChasePlane I had to get it. It is in alpha stage and being a software applications tester myself I was expecting a whole load of defects and crashes - to my surprise it was quite the opposite for me. In my opinion it is more than stable enough to replace my trusty EZDok. I just wanted to say thanks for providing such a great tool and also a special thanks to Keven for joining my stream tonight. I lost my streaming software scenes so unfortunately you …

I seem to recall this subject being discussed many moons ago but can't for the life of me remember where or what the conclusions were? I know that it is down to individual preference but - now that we have this superb bit of kit in our hands to adjust these things properly do any of you have any suggestions as to the most realistic VC setting?

Hi, Just getting to grips with Chaseplane, so far so good although it has a small learning curve after so many years of relying on default spot view and mouselook. I think I found a small bug/oversight: If I map the Left/Right Cursor keys to move left/right, then also assign Ctrl + Left/Right Cursor keys to roll left/right, I find that when pressing Ctrl + Left/Right I get both effects happen simultaneously - the camera moves and rolls at the same time. I think Chaseplane should read "Ctrl + Left" and "Left" as two completely independent inputs. I assume the Shift/Alt keys work the same way (but I haven't tried). Kind regards, Martyn

Anyone set up both a game pad and a yoke in P3D? Currently using a Saitek yoke and would like to set up a Logitech or Xbox game pad too. Saw somewhere that P3D will set default bindings for the game pad that have to be removed. Would appreciate any setup tips. Thanks

GoodNight, I love this camera manager, I have only a complaint........ joyPov of the yoke could go a little faster I use it to Pan leght, Pan right, Tilt up and Tilt down , and it goes a little slow Thanks and Regars.

In FSX (Fixed in P3D I've been told) the camera moves depending on your heading and location to the equator. Does this addon fix that? I am a potential buyer thanks!

Hi, Love the product !! I was wondering if there is (or plan to be) a setting that I can assign a keyboard key to a camera view. For example I would like to select the pilot view by pressing the "home" button on the keyboard Thank you

Spent a frustrating first night with this . Flying with a saitek yoke a proper hat switch is essential . I have sort of got working but not as good as ezdock . The use button invert hat switch as buttons is also a must have helps a lot and is not implemented please put in a similar switch. There is a lot of lag going to next view no idea why . Hopefully these will soon be sorted in updates appreciate this is alpha so getting my requests in early. Need more more time to play but as stands ex dock is my preferred choice . Got potential hopefully those like me who took the early gamble will end up with a great product .

In the OnBoard Control Bindings I have the Saitek X52 Pro's hat switch bound to pan left (move left) / pan right (move right); and zoom in (up) / zoom out (down). These function ok but not smoothly (as do the selected camera views). I've checked P3D's Options/Controls to be sure nothing else is bound to the hat switch. What else might be causing jittering motion even though the aircraft is parked?

Hello The Presets page and assign a button I want works perfect, but the purple color to assign a key is not working, is there anyone able to assigin a key in the the Presets page?

The one that shows when you hold the mouse wheel down. Mine comes up but only what view you are currently on is highlighted. Thank you.

i'm really enjoying the cinematic mode!!! would love to see a few tweaks on it. 1. seems to almost always be looking kind of low under my aircraft, a bit more variety here could be cool, maybe some from directly above or below. with the current low views, a lot of times if i zoom to more than 1.0 the plane is completely off the top of the screen and is usually in the top third. this view is great for scenery! just would like to see a bit more variation here where sometimes it's directly at the plane or above it instead. 2. on the ground might be nice if it could detect that you are clipping through the terrain, seems to happen a lot with lower zoom values like 0.…

Just an suggestion : if the mouse wheel can be used for sliders, here facilitate trimmings. regards,

Hi guys, first of all, great work, love ChasePlane and everything works fine for me. Just one question, if I load a Camera Preset from one to other aircraft, the Keyboard shortcuts are not included. Is it posible, to load the shortcuts with the views too? Rgds

Bonjour , The problem is random, I was not able to determine the precise moment it happens. when I successively exchange views the one after one, all is in correct. Then without reason Can views appear as if I had taken all views and had set the zoom 'in' while I have not changed nothing of all this views ! I have to close 'chaseplane' and P3D 3.4 revive 2 softs and the views are correct again. Really disturbing problem. Thank.