ChasePlane Support

Hello FSFX or anyone in our community, Just purchased Chaseplane and working hard to get it working correctly. So far so good and it's awesum. But 1 thing I have still not been able to do figure out and to which I hope to receive an answer. When using 2 displays ( 1 for flight deck and the other for an outside view) is it the also possible to use Chaseplane for the separate outside view when I am already using it for the flight deck? Regards Dirk

Hello, I imported some ezdok presets and whenever I changed to external view it always goes to top down view. and when I put it back to spot view it doesnt show the right angle. here's the video example: https://www.youtube.com/watch?v=B3PZxyQCJoE&feature=youtu.be Any way to fix this? Thanks.

Hello, Before purchasing the product, can anyone confirm if it is possible to use the hatswitch in VC and outside view to pan around the VC or the aircraft in outside view as it is in default FSX/P3D or even Ezdok ? Thank you

Hi guys, great job, really love the program. Just two problems, it seems to have introduced some micro stuttering to my sim, I get the same FPS just slight stuttering now (tested with and without) - any suggestions? Also can not get the in sim menu to work properly, click down my middle mouse button and the menu shows fine but can not select anything else apart from what is shown by default - I have tried using mouse scroll over everything but the menu won't scroll. Ben

Hi, thank's for the nice piece of sw, I'm just loving it I would like to add my 2c. Sometimes I like to use my simulator almost as an aquarium :wink: and just enjoy my ai traffic (hard work to build it). I'm using a xbox controller and in the ai views only pan axis works. Not using the TIR workaround because for some reason freepie just dies as soon as I run the script. So I'm using TIR in the views inside the aircraft and i disable it and use ChasePlane for the others It would be nice to use all the chaseplane features, and TIR in the future, on the AI views I hope I was clear enough Thanks AS

Hi, I'm looking how to control the zoom (not possible anymore with mouse wheel) and up/down, left/righ moves using my hat device. As it's already assigned to pan/tilt functions of course it's not possible. So I was thinking that It would be great if we could assign controller buttons + Ctrl, Shift and Alt keys to multiply usage of the same buttons. Thanks

When setting Gyroscopic speed and inertia if you want this speed for all your presets I assume you press globalise . If this is is the case I cannot get it to work I seem to have to set it for every view .Any suggestions or is this a bug .

Man I luv those animated startup screens - well done

Joystick POV hat buttons are properly recognised – e.g. "POV (90°)" – but not saved as button assignments for Presets.

Hi Team, We have the ability to change the camera position & direction parameters by typing in the exact values we want, which is fantastic. It makes setting up a Captain/FO view position at equal heights and forward/rear positions a breeze, amongst other things. However, I noticed it's necessary to click away from the entry box after typing in a value for the change to take effect. You can't type in a value and simply press Enter: nothing happens until you move the cursor out of the box. So just a minor request to have the view update after pressing Enter to finalise entry, but I think it's a useful one for future inclusion. Regards, Martyn

ChasePlane does not seem to launch with P3D, it is set to in the configuration panel.

Hello Keven, I really like the UI of Chase Plane and I am enjoying the opportunity to use the alpha version of this program. It shows great promise. Because I have been a long-time user of EZDOK, it is hard not to make comparisons and ask if some missing features will be added to Chase Plane in future builds. Specifically, I was wondering if you will be adding a feature to the mouse look that will slightly shift your relative viewing position as you turn your head (this was the mouse-look shift adjustment in EZCA)? This feature simulates movement of your eye position relative to your "body position" (and to other items in the cockpit) as you move your head…

Hi All, Still cannot assign any keys at all. Anyone have this issue? I have already sent in the log.txt. Is there any time-frame on the fix. That's the only issue I have this end Thanks

Don't know if this has been reported yet guys etc. When using GSX with the menu pop-up, once you select boarding for instance and it disappears then you cant use Chaseplane as it seems GSX still has global influence if I can call it that? Once you bring up the menu then any camera changes you tried with chaseplane then happen with the window open. I've found a way to solve this in the interim and that is when selecting anything in GSX menu to then re-call the menu after it disappears itself then right click and 'close' the GSX window and that way Chaseplane again has global influence. Thanks, Ryan

Hi, The size chaseplane window is really too large on the screen, you have to constantly move the window to make fine adjustments. The optimization of this window is necessary. -a reduction in the sizes of fonts, column widths trimming, camera menu, you can optimize the lost spaces and reach a half size of what it is now. It would be a great service to us, we thank you. Regard

Hello From time to time Chaseplane keeps moving the view. It won't stop until I have restarted the computer. Somehow it always starts whenever I move the camera by pressing the arrow keys on the keyboard. I do not use a gamepad. I think Chaseplane even triggers these commands in Windows as you can see in this Video that I took: Another Problem that is not related to this Issue is, sometimes when I want to setup a new camera via the Middle Mousewheel selecter, it doesn't allow me to change the name of the new camera. The text isn't highlighted as usuall and when I try to click on it nothing happens. I am only able to click cancel/back and create a new camera via the c…

Hi Guys.... I want to start by saying awesome work with this so far.... changed from EZDok the other day and this is so much better. I realise it is in Alpha and bugs/glitches are to be expected. I just want to put the issues forward that I am having as I haven't seen any posts regarding them so far (or if there are my apologies!) and if you don't know about them they won't get fixed!! 1) When changing view from Inside to Outside, using a key binding (set to the numpad), the aircraft model sometimes isn't shown and all you can see are NAV lights or strobes flashing. The view I have is high and directly behind the aircraft at a distance, to aid with taxiing. Once …

Hi , Do you have the same problem ? http://cd91.eu//VideosChasseP/video3.mp4 Regards,

Hi, The views cameras moving all alone! Not possible to make external camera views around the aircraft. http://cd91.eu//VideosChasseP/video4.mp4 Regard

The biggest issue I have, even when I used to use EZDOK, is when adjusting a dial setting on the VC. For example on the PMDG 737, adjusting the BARO or Decision Height using the mouse scroll wheel and the slightest turbulence would knock you off the knob every few turns. It is great that you have thought about the pause on mouse movement, but is it possible to pause on scroll wheel movement? As this is still an issue I am having even with pause on movement enabled, because technically the mouse is stationary. Call me picky if you like but it's just a thought, if it could be added as a preference so people could enable it if the wanted to. Mick.

First, let me say that i really enjoy this software and i have successfully configured my cameras, even imported my EZCA-views (works great by the way). I´m also eagerly following this forum but couldn´t find a topic related to what i´m about to write, so please ignore, if this is already covered. It would be great to have a "selective save" function, let me explain what i mean : Example : I want to change my turbulence settings and accidentally panned around, so changed my default viewpoint, wich i had already saved and was happy with, in this case, hitting the "save" button would also update/save the new viewpoint and that´s what i don´t want, so having the ability …

Hi , in menu control binding. keyboard shortcuts zoom in-out, do not work out, but my FSUIPC trimmings yes. my PC win7-64 and P3D 3.4. Regards

I don't know what happened, but all of a sudden the mouse stopped working for clicks and scroll wheel response when Chaseplane is activated on the 320X. If I bring FSXSE up w/o Chaseplane all works as advertised, However as soon as I activate CP the mouse stops working. Besides the normal view maintenance the only change I made was that I activated "experimental" builds. I turned them off but the mouse behaviour persists UPDATE, Resolved Known issue with the 320X, I had moved the eyepoint back too far. This causes the mouse to quit working.

Hi there! What a fantastic program! I´ve been an user of the "other" camera addon for FSX/P3D for years! And I´ve been hasitating to pull the trigger, but I am so glad, I did! Setting up your program and using it, is just a breeze! One quick question though. I use a Logitech MX Revolution mouse, and in SetPoint, I´ve set up the mouse wheel to accept a middle mouse click. That works, as soon as I hit the middle mouse button, the in game menu pops up. But I can´t scroll through the different entries. Do you have any ideas, why that is? Thanks a lot in advance for your help!

hello, I have a problem that the camera outside can not create when therefore selected the outside because it gives me a view from the sky, and continues to move my camera with ChasePlane and algien could make a tutorial or send one for more or less set the chaseplane well please thanks