RXP GTN 750/650 Touch

Anyone having any issues with there payware are aircraft when using the GTN750? when flying the TBM 850 or the Kodiak the GPS NAV function will disconnect when in the auto pilot each time you get to a way point. But works fine with the default aircraft..

Is it possible to get these trough a dataref? Through the discrete out maybe? I couldn't find it in the documentation.

Hi using the GTN 750 in x plane. When flying in nav auto pilot mode and you arrive at a waypoint the nav mode disconnects.

We have made sure the power source is always on. I have uninstalled and reinstalled Garmin Trainers. I have run X-Plane with high performance NVidia (default) selected. In looking through the logs in My Documents: 20/03/05 22:54:52.878 38604 - ] # rxpGtnSim64.dll version 2.5.22.2 20/03/05 22:54:52.878 38604 INFO ] 20/03/05 22:55:07.918 38604 ERROR] trainer not found 20/03/05 22:55:07.925 38604 INFO ] installed: 20/03/05 22:55:07.926 38604 INFO ] 6620 nav: C:\ProgramData\Garmin\Trainers\Databases\ 20/03/05 22:54:50.114 38604 - ] # win.xpl version 2.5.22.2 20/03/05 22:54:50.114 38604 INFO ] X-Plane 11 is installed on the D drive due to space l…

I have recently purchased the the RXP GTN750 for FSX SE. The product appeared to install fine, the trainer works. I’m using the Comanche 250 from A2A. They have their own app for going the gauges. Used this and selected the flight 1 750 as there’s no 750 listed for RXP?? In game, the 750 shows in the aircraft no probs. Go through aircraft start and power up the avionics. All work except the 750. I have found a couple of other articles relating to an ‘always on’ setting. Couldn’t actually find where to make such a config change. I’ve also noted that the installed loc of the 750 DB is in different loc to that specified in the user manual. I created a windows variable w…

Hello everyone: I have a little question. Maybe you could help me to understand which folders i need to backup in order to not loose the stored flight plan and user waypoints?. thanks

Hello I purchased Reality XP GTN 750/650 for X-Plane 11. After installation, inside the aircraft, the GTN 750 will display outside of the aircrafts panel. I have made sure I had the latest updates installed and still does not replace the default gps inside the aircraft. Everything else works fine with all the functions. That is the only problem. Are there any solutions for this issue? Thanks for any help in advance!

I had this issue before, but for some reason I could not find where it was saved. Instead of reinstalling from Login / Password, I was going to try and install by browsing to my key, but it ask for a password, that I do not remember getting or creating a pwd, and its not the last four of my credit card either. I tried to create a ticket, I get no web-form errors, all windows filled in, progress icon lower right just spins nonstop forever. My install of Win 10 is a bit different, my "User" folder is on my G: drive, and windows writes everything to my G: drive. This folder exist - C:\RealityXP Problem - Error: Run-time Error 75: Path/File Acc…

When trying to go through my set up process for the GTN 750 of which I just got I try to go through the setup thing and I have no clue what to do when it asks me, "Setup will create the program's shortcuts in the following Start Menu folder". It has RealityXP already put in but I have tried that and a bunch of different folders and I don't know which one I am supposed to use.

Hi Jean-Luc, got a new rig and reinstall everything, using 2.5.22.2 with trainers. But I get black screens, trainer not found. 20/03/05 05:18:21.537 02152 - ] # rxpGtnSim64.dll version 2.5.22.2 20/03/05 05:18:21.537 02152 INFO ] 20/03/05 05:18:35.695 02152 ERROR] trainer not found 20/03/05 05:18:35.699 02152 INFO ] installed: 20/03/05 05:18:35.709 02152 INFO ] 6620 nav: C:\ProgramData\Garmin\Trainers\Databases\ ---- 20/03/05 05:18:18.752 02152 - ] # win.xpl version 2.5.22.2 20/03/05 05:18:18.752 02152 INFO ] thanks Alex

I subscribe to Navigraph and thought I was dutifully updating the GTN 750 installed on my Carenado Beech Baron 58. Then in the start up procedure for the GTN- it looks like the Charts, etc are from the original specification are not being updated. Any suggestions?!

The nav database is from 2018. How can i get a update of the database? Thanks Pelliflyer

When I install the trainer software and select the root of x-plane it installed into another drive for some reason. I did recently reinstall xplane to another drive so I dont know if the Trainer softeare is picking up the other install. I am not sure if I can just move it either. It work before the move to the other drive. Help

I build a new flight sim computer and am installing programs for my X-Plane. I am trying to load my RealityXP GTN for Xplane and get this message file not found when program goes to internet? when I click on rxpGTN-XPL-Setup.exe I get the message "File not found (404). On the website I have a valid order number and F1 certficate, but when attempt to download it says There is an invalid product configuration Please contact support. But I can find where I can find support????

isn't it about time these software developers took responsibility for they're own releases and stop pharming it out to forums such as this one and .org . I thank all the contributors but the buck stops with the developers. ive had the same issue for weeks and no one can help.

Hi Everyone I am super new to all of this flight sim stuff and blows my mind how real the equipment is. I am wondering and hoping someone has a solution. I purchased the GTN 650 and it definitely runs like a dream. I also purchased the G5's so that I can mock the plane I fly. The issue I am having is that from start up when the GTN set the half needle defaults the needle does point to the 150 degree mark to verify synced. I then put in a flight plan with an approach and the GTN cycled through the flight plan but the GTN did not communicate and switch the needle to the next desired heading when it needed to. I have reached out a couple times now with so far only …

Hi I purchased the GTN750&GTN650 at the same time but now the 650 has vanished from my plugins. Also the GTN750 does not integrate into my Carenado C340 ll 3D panel please can someone help me and if not can I get direct support from RXP. I Need to retrieve my activation keys if I want to reinstall. Thanks Bryan.

I would like to add GTN 750/650 to my X-Plane 11,need help buying and installing.

Hi My GTN750/650 is not running as it should so I would like to uninstall and reinstall but I have not got the sidereal keys for the products. can you help with this matter …. thanks Bryan

I have the GTN 650 software and the RealSimGear GTN 650 running on X-Plane11. I get a "invald license" error. I have reloaded the license from F1 multiple times with no effect. Once I get the app running I get a "commercail use detected" error. I have tried to find a way to buy a commercial version on the website but I get referred to a contact us form. When I enter my data in the contact form the working doohickee starts spinning and doesn't stop. I have let it run hours and no joy. Who do I contact to buy the license? F1 says they are not aware that Reality-XP even sells a commercial license

So I download it - Extract - Have run right away, have also done a quick uninstall of the X-Plane 11 version via Control Panel and it still pops up saying I need the new update (version 2.5.22.2) - Continues to say I have 2.5.22.0 What am I missing please?

Hi, I own the heli X-rotors AW139 and use the GTN750 a lot. But I would like to build it with full functionality in the 3D cockpit. There is non used space in the cockpit where it should fit. Where can I find instructions how to do this? Thx in advance...

Good afternoon, the cockpit panel is not displayed, the 2D panel is working. Please discard the working config for the aircraft.

I keep getting the blank screen in my newly updated GNS 750. This happens to me a lot. Any ideas? This is what my rxp,GTN,SIM.dll.log says: 20/02/16 18:35:39.535 09820 - ] # rxpGtnSim64.dll version 2.5.22.2 20/02/16 18:35:39.534 09820 INFO ] 20/02/16 18:37:15.878 09820 INFO ] GTN 750.1 - TRAINER 6620 20/02/16 18:38:32.092 09820 WARN ] FAIL: 01 ..\..\src\krnl\krnl_lib\sim\hwm_nand_drvr_sim.c(838) (null) 20/02/16 18:38:32.093 09820 WARN ] FAIL: 01 ..\..\src\krnl\krnl_lib\sim\hwm_nand_drvr_sim.c(838) (null) 20/02/16 18:38:32.094 09820 WARN ] FAIL: 01 ..\..\src\krnl\krnl_lib\sim\hwm_eeprom_win32.c(267) (null) 20/02/16 18:38:32.095 09820 WARN ] FAIL:…

I working with Alabeo M20R_Ovation_v1.3 plane. The Reality XP GTN 750 transponder does not stay on. It seems to work on default planes. Any idea what sort of tweak I may have to make to have this function? Really need it for Pilot Edge, especially because I own a Mooney and spent big bucks building a physical replica of my own panel which has GTN750.