RXP GTN 750/650 Touch

Hi guys, is it possbile to integrate the GTN in the PC12 for X-Plane 10 ? I tried to deal with the XP11 one, but it's not working :) Thanks Jean-Baptiste

Good day guys, gals, I am trying to connect the GTN750 to the TBM. The issue I have is that the TBM has enabled popups so when I click the screen it is popping up the entire g1000. Is there any way around this? I have PM'd toto the creator of the TBM and hopefully he has a way to shut off popout windows. Spoiler [GTN] ; comma separated list of gauges gauges = GTN_725_2 [GTN_750_1] ; comma separated list of render targets. drawto = WINDOW, GARMIN_G1000_SCREEN ; is the master device if true. MasterDevice = true ; connects GPS to copilot side if true. CopilotSide = false ; selects COM/NAV Rad…

Jean-Luc, what's up with the GTN650 installer, and the virus warning? I've had the 750 for over a year, and never had a issue with it, never once a virus warning. I bought the GTN650 today and had to turn off Windows Defenders protection just to get it downloaded, constant complaining about a virus. Then as soon as I turn the protection back on the file automatically gets deleted by my system. I run multiple installs of Xplane and would like the 650 and 750 installed in all of them, but with the installer disappearing it's making things difficult and cumbersome with the 650. Why am I having a issue with the one installer and not the other? All I'm running is Win…

Hi guys, Looking at the instructions on the Baron I was wondering if we could replace the right screen of the Seneca PFD (where you have the map) and add the GTN750. I was wondering because maybe because of the size it might be possible? Check screenshot of panel: https://prnt.sc/gj4xhs Thanks, Teo

Please make one for the Flyjsim 727! Thanks 😄

Hi there, Is there any chance integrate GTN750 into RW Desing Cessna Mustang? Optimaly into right display. I ve tried it, but I am absolutly lost. Thank you in advance 🙂

Hi i bought the GTN750 on xplane and i wanna switch to p3d is it possible?

E-commerce coupon downloads from RXP website and saves to my computer. Click on the file to unpack and purchase, creates a brief message that does not remain on the screen long enough to read. Then the downloaded coupon disappears from the folder in which it was saved. Even tried F1 software directly, but find no reference on the website for the X-Plane GTN750 being available. How can this add-on be acquired?

hello all, I've lurked a little bit on these forums and recently purchased the GTN 750. I have been trying to integrate it into the viper jet (Successful), Falcon 7x(partial success), and the Gulfstream IV(partial success) On both of the business jet freeware aircraft, I can get the RXP 750 to render in the correct place on the 3D virtual cock pit, however, I can't get it to be touchscreen. I will post my Ini file down below! Please help me knock this out, so I can add 2 more aircraft to the configuration panel 🙂 so we can get more aircraft to feature this amazing GPS! [GTN] ; comma separated list of gauges gauges = GTN_750_1 [GTN_750_1] …

Why would the tcas display work in one aircraft and not another. I would think the displaying of that data has nothing to do with the aircraft being flown, and is a function of the gtn 750? Xplane 11 latest beta. I've compared the GTN.ini files and I don't see anything that stands out. One is the default Baron B58 modified to work with the 750 in panel, I see the tcas info, and the other is the Carenado Navajo that has 750 integrated into the panel stock, it's not displaying tcas info. I can't even open the window.

Hi, I bought the GTN 750 and 650 from F1 yesterday and installed them using the downloaded setup programs. However, when I try to activate them using the plugin, I get the message: "INVALID LICENSE: CONTACT VENDOR". How do I fix this?

Each time I have loaded an Aircraft during the past two weeks, my GTN750 starts ok, but within five minutes of startup, it stops working with the following Msg on the screen, "Reality XP Software: EXPIRED or INVALID". When I check my updates, it says I have the most up to date update. Any suggestions on an Fix?

i buy it yestarday and: 20/05/30 13:18:02.613 08116 - ] # rxpGtnSim64.dll version 2.5.25.0 20/05/30 13:18:02.612 08116 INFO ] 20/05/30 13:18:46.460 08116 ERROR] trainer not found or not supported 20/05/30 13:18:46.466 08116 INFO ] installed: 20/05/30 13:18:46.466 08116 INFO ] 6623 nav: C:\ProgramData\Garmin\Trainers\Databases\ 20/05/30 13:18:46.468 08116 INFO ] 6620 nav: C:\ProgramData\Garmin\Trainers\Databases\

Often times while flying IFR flights on Vatsim, ATC will give me a shortcut and I’ll jump a few fixes ahead in my flight plan. While on autopilot in NAV mode, when I click “Activate leg” on the GTN 750 to the specified shortcut fix, the GTN always makes it go from the previous fix to the fix I am trying to fly direct to. This messes up my instructions from ATC since the autopilot is trying to go from a fix I haven’t reached yet to the fix I am trying to get to as instructed by ATC. How can I go present position > DIRECT to a fix in my flightplan while using NAV mode w/ autopilot on GTN 750?

Good Evening, Since updating to the 11.5 beta and having installed the most recent version,the RXP 750 has not been controlling the SIM GPS. Heading works fine, but GPS NAV does not work. Is there anything that I can do or is this a known issue that is being patched? Thanks, Nick

Which are the best panel settings for reality XP installed into an A2A C182 skylane? Regards,Herman Klaver

Does anyone know the proper settings so that the CDI works and comes in when flying RNAV approaches? I MUST have something(s) set wrong as neither needle moves at all despite active approaches. Thanks!!

My GTN650 GPS (downloaded and updated today) will work as a pop-up (on the downloaded and updated vFlyteAir Piper Arrow III under Win7) but will not show on the panel. The panel GPS buttons/knobs WORK and affect the pop-up panel but that's all. I've read virtually everything about the problem but cannot solve it.

Hi, I have a problem with GTN 750, when i use vulcan version of Xplane, i have black screen on both popup window and cockpit. If i try to turn off gps/turn off plugin/reload plane/ or change plane to other xplane just crash. I tried in VR and non VR, and also on default cessna 172, and paywares planes like SF260. When i go back to OpenGL version it's works normal, i can turn it on/off, reload and change plane in VR and non VR. I read posts on forum, and i checked core usage. I use only one graphics card. Separatly trainer works fine. Thus i have question, its works on vulcan version? Is it known problem? And if isn't supported, are you planning support for vulc…

I'm noticing that "sim/cockpit2/radios/indicators/hsi_display_horizontal_pilot" is not staying in sync with "RXP/radios/indicators/hsi_display_horizontal_pilot". When the RXP dataref is at 0 the xplane ref is still at 1. This issue seems to manifest itself when the GTN CDI is set to GPS but with no flight plan in the GTN.

I am flying the Carenado Falcon FA50 EX and I get the "Terrain Terrain" warning over and over and over, but I can't find a way to turn the warning off. Is there a way to turn that blasted thing off?

I have installed and reinstalled the GTN750 with X-plane version 11.41. Every time I go to the plug in menu all I get is a black screen with just the frame of the GTN unit. It does not interace with any of the compatible panels. ie (Carenado etc.) I've searched for answers to this issue to no avail, hence this post. I'd be happy to attach files that might be helpful, but I'm not sure which ones to use. Thank you for your time and consideration.

Hi, I already have the GTN650 and GNS530 installed and running fine. I just purchased/installed the GNT750 with no error except a message telling me I already am up-to-date (v. 2.5.25.0). I still only see the first two products in my plugin choices. Can you please advise ? Regards, Philippe logs: [rxpGNS2.xpl.log] 20/05/20 01:49:21.419 22748 - ] # win.xpl version 2.4.20.0 20/05/20 01:49:21.419 22748 INFO ] [rxpGnsSim.dll.log] 20/05/20 01:49:25.403 22748 - ] # rxpGnsSim64.dll version 2.4.20.0 20/05/20 01:49:25.402 22748 INFO ] 20/05/20 01:50:27.833 22748 INFO ] G530.1 - TRAINER 3300 [rxpGTN.xpl.log] …

Hi Jean-Luc. I am currently using the 750 version number 2.5.17.0 in X-Plane 11. Do you suggest that I update to the latest version? If I do update will the Trainer also update? Thanks a lot and hope you are well, Howard

May I request that someone add this mod to the “Carenado C90 King Air XP11 v1.0”. I love everything about this GA except the stock nav sys. Having the Reality GTN 750 would make it amazing. Thanks for considering...