RXP GTN 750/650 Touch

I cannot install the rxpGRTN-XPL-Setup.exe program. I am getting the following error: Download failed Download failed: File not found (404) Please help on this as I do want to get started with the app. Thanks .....Carlos

I've rebuilt my X-plane install from scratch ( a fresh install) and am now installing add-ons. I re-ran the GTN is now reporting invalid license. I have the proof of purchase. What should I do?: Thanks,

Hello, i made big mistake when i was bying sone Minutes ago your GTN750. By Mistake i by the P3D Version instead of the X-Plane Version :-( It was a long day and i was a little bit in a hurry to get the 30% stay at home Rabat so do this stupid mistake. :-( Now i will by the correct X-Plane Version to ensure not to miss the 30% Rabat. Is there any chance to get a refund from your side for the P3D Version of the GTN750 that is completly useless for me? For example by invalidating / deleting this License? This would be great!!! Thanks a lot Lucas

Hello 🙂 1 - Using X-Plane and the GTN 750, where are archived in my hard drive the flight plans that are introduced into the GTN 750 from X-Plane ? (not the ones we can import) 2 - If I enter a flight plan from the GTN 750 trainer (flight planning), how do I retrieve (or import) it into the GTN 750 used with X-Plane?

Hi, i just notice that Garmin has a newer version of their 750/650s on the market now, they are called 750Xi/650Xi, will you guys update the product to this version as well? Thanks!

Tried downloading and installing the new update through X plane 11 this morning and I was greeted by Windows Security. rxpGTN-650-XPL.exe, RealityXP\Software Updates\Garmin GTN 750 650 (XPlane).lnk and RealityXP\Software Updates\Garmin GTN 750 650 (XPlane).lnk contain Trojan threats. These files were all downloaded through the native update option within X plane 11. Anyone else experience this?

Is it possible to operate the GTN650 on a virtual panel in X-Plane, and later upgrade to a physical bezel instrument?

I have just bought the carenado citation 11. and i also purchased the gtn 750, it was not showing in the planes cockpit only in the window version. I deleted is and can not find where to re download it. Please Help

Hello all, I would like to buy the GTN 750 for some Carenado XPlane11 airplanes, so here is my doubt. Let's say I have 2 Carenado aircraft (PC12 and PA31) on which I would like to enable the GTN 750, so how many licenses should I need to buy?, one or two?.

Hi, is there any way I could replace the FMS unit/gauge in the Carenado Citation 525A CJ2 with the GTN750 unit?

Hello. I bought and installed GTN 750/650 stack three days ago. I have been trying it with different planes since than. It really does not matter what plane i pick, the 750 and 650 is very slow. I mean I get about 50FPS in xplane while this is hapening so i know that it is not an overall FPS issue. The issue is that when i click a button on the gps screen, it takes like three seconds and it is very jittery. It is like the GPS having 5 FPS while xplane itself running 50 FPS. BTW i am using xplane beta with vulcan enabled, perhaps that is the issue?

Any way to map Zoom in/out to Yoke at GTN 750??? Tried several commands from G1000, but they dont work at XP 11.50

Hi there, I downloaded this product as this is the same GPS as I use in real aircraft. My xPlane 11 Windows 10 simulator exceeds the specs required for xPlane. My sim works beautifully UNTIL I open the 650, at which point it slows down to an unusable state to the point where I need to restart the sim WITHOUT the 650 in order to make it function again. Any suggestions on settings, etc that I can change to fix this? I have decreased my graphics and other sim settings, but didn't help. I have tried everything in my knowledge bank (including reading the manual). I need this resolved quickly as it was purchased Mar 22 and I will be requesting a refund if…

..I know it's kind of an old post, but I was wondering if you with Carenado B58 Panel modification ??

Hello everyone, I've changed my PC and lost my key at this time. I tried reinstalling my GTN750 which I bought last year in April, but since I also don't have a Flight1 Account, I'm not able to do a keyless reinstall. I searched the RealityXP Website for a support form, but it didn't seem to be working as well as being for companies only (I guess?). Is there a way to get in contact with someone from RealityXP to get another key, since I still have the receipt and the transaction code from Paypal, or do I have to rebuy the product. Best regards cleanup 💺

Hi to all I recently installed RXP GTN 750 into my Turbine Duke v2 with autoconfigurator. All gone fine and works fine but the GPS is a bit too little to read, so I'd like to popup windows but if I click on gauge in VC never happen. 1) Is there a way to solve this? I tried popup configurator but after reloading only appear a 2d popup that I can't close clicking on VC gauge, I have to close it via menu 2) is it possible to enlarge a bit the VC gauge? thanks a lot, Ric

For several weeks, I have been unable to get GTN 650 or 760 screens to appear on either the pop-ups or on in-panel GTN screens. My GNS plugins are working fine. I have re-installed RXP GTN 650/750 several times, and the installer says that I am up to date. However, I am not prompted to activate the license by the installer. I have uninstalled the complete set of RXP programs from my PC, including the Garmin trainers. I removed the "\Programs Files(x86)\RealityXP" folder after doing the Windows uninstall. I also deleted the rxpGTN folder from the X-Plane 11\Resources\plugins folder. I reinstalled the GTN from scratch, including reinstalling the Garmin trainers. …

Hello, Has anyone had any luck with the GTN 750 being incorporated into the Carenado C340 II in X Plane 11. The website states that it will work right out of the box, but when installed I jump in the sim and the GTN doesn't pop up on the panel, only only shows up in a windowed mode. Is it an .ini issue or do I just have a bad download, I have re installed both, the aircraft was purchased on the org store. I have run through the forums but can't seem to find it. Thanks for the help.

My scenario: I'm using rxp gtn 750 & 650 with Xplane 11's stock G1000 C172. I'm not (at this point) worried about having them integrated into the cockpit and am just using the pop-up windows on a 2nd computer screen from my screen 1 Xplane window. The problem I've been having is getting the info from the RXP devices to correctly display on the HSI, autopilot, etc. I've tried semi-randomly playing with the various advanced and normal settings with mixed results. Sometimes close but never 100% functionality. If anyone could give me their best settings with this type of scenario that would be most fantastic. I've gone through the support forum but have ye…

Hi everybody, All the Carenado planes of X plane, dont show anymore the GTN 750 on the cockpit. This issue comes from the last update (mars 2020) of the Garmin trainer. Is there any solution ? Lorum

Hello everyone! I´ve notice that my GTN it's little bit slow than before only the GTN the simulator runs good up to 30 fps but the screen of GTN doesn't. Any suggestions

Hi Folks, Windows just comes up with a warning: "Trojan:Win32/Azden.B!cl" supposedly found in the rxpGTN-750-XPL.exe download. Program has been sent to quarantine. Is this just a Windows Defender hysteria or is it real? Regards, Norbert ---------------------------------------------- Original message (sorry, my computer's speaking German most of the time):

I often get a reminder to update my GTN 750. I think I have the Version installed. When I turn on the GTN on the aircraft, the gauge screen shows Version 2.25.23. The SW Version shows 6.62.0 TRNG. I also have a Navigraph subscription, which I thought was being updated...but the Guage reads Nav and Charts 1909,,,, not the latest. What do I need to to to make sure Navigraph charts are updated? I tried to snap a picture but can't seem to attach to this post. My lack of computer skills. Sorry!

Hello friends, I have a problem with the RealityXP GTN 750 for the X-Plane 11. I bought the software back then. So I installed the Sorftware and it worked without problems. Then I deleted this software out of disinterest in the X-Plane. However, I secured the RealityXP order installed at the time. The PC has not received format C. Now I wanted to reinstall the software because I want the XPlane. So I reinstalled the software. Everything runs in-game and the trainers are also reinstalled. But the garmin 750 on the plane tells me that my active license is invalid. Even worse, I don't get any query to enter the license key. Of course I saved the Flig…

Is it possible to enable second GTN 750 or GTN 650 on Carenado Pilatus PC-12 to display on 3D Panel ?