RXP GTN 750/650 Touch

What is the airac cycle that ships with the latest GTN update? Thanks

I hope anyone can help me figure this one out. I have X Plane 11.5 installed, Reality XP GTN 750 installed and updated to the latest version which I use in the following aircrafts: - Alabeo M20R_Ovation_v1.3 - Carenado C340 II_v1.1 - Digital Replica Cessna 310L - MilViz CT310R V1.09 In ALL of them, the GTN 750 blends with the cockpit without any issues, can follow a flight plan and connects with the autopilot well for flying the plane. However, on approach, neither of the planes captures the glide slope. The AP keeps the ALT HOLD altitude. When I switch all planes to the default Garmin 530, no problem in capturing the GS. I have read several posts here from the …

After an X-plane update and a Windows update and a video card update all yesterday, the GTN will not power up. The screen is blank on the unit. Just wondering how I can/should fix this? This is the first problem I have had with it.

The database for the GTN 650 and 750 does not load. Unable to discern a fix. The following HKEY "WOW6432Node\Garmin\Trainers" entries were found: "BinPath": C: Program Files (x86)\Garmin\Trainers "DataPath": C:Program Files (x86)\Garmin\Trainers "DBDataPath": This line entry is absent; neither the "DBDataPath" nor any related file location reference appears. Other directory and files present on C and D drives: Location: C:\Program Files(86)\Garmin\GNS Trainer\GNS\DB (with subfiles) BMAP.BIN, terrain.adb, terrain.odb, TERRAIN.TBD, worldwide.bin Location: D:\Program Files (x86)\Launcher (w…

Hi, I bought the GTN 750 2 days ago, I followed all the installation sequence, but there is no database. In the garmin trainer everything works fine and there is the database. The problem is that when i load in xplane and I power on the GTN, there are all the yellow "database not found" for everything. The panel works fine, but it is unusable. the map is black, there are no waypoints, no airports... I tried to reinstall everything 2 times but nothing. How can i add the database manually. I would appriciate a step-by-step guide. thank you

Hello all, Just wondering if the G500/600 project is dead? I see reference to it on the website, and I am trying to do some project planning.....if it is a possibility in the next 6 months or so i may wait, if not, I will go with the G5 for xplane. Thanks.

Hello.. I am not very technical and really don't know where to start in fixing my issue. I have a number of 'GTN750 compatible' aircraft in which the product is no longer working. Have read the manual and see no RXP files in my Defender Quarantine. Have updated all my RXP trainer files to latest version (2.5.28.2) . Since updating to Vulcan in XP11, noticing my RXP GTN 750 is not longer working (GTN750 not displaying at all except pop up - which is black screen, or getting black screen with "rebooting" message in lower left corner or only working on pop up screen - not screen integrated into the 3D cockpit. This seems to be happening with select Carenado aircraft…

i have been using my gtn 750 for over a year with no problems but now just getting a black screen that will not turn on in any aircraft at all. not sure why it was working fine a couple hours ago?

Hello, everyone! I know this is probably a dumb question, but I can't work my way around it. I fiddled with everything in settings and can't find it how to make it work. Both my vFlyte Arrow III and Carenado Centurion display a grayed out OBS button on the GPS. Does anyone know how to help me?

I hope this is the right place to post this question. I just updated my GTN750 this morning and I have notice the several airports are missing approaches. The one is use a lot is KABQ which is missing the RNAV approaches for RWY 21 and 26. Ever try a visual approach with fog? At one time, the approaches were there.

I followed this tutorial for the 530: I was able to get the GTN to display in the cockpit, however it does not register mouse clicks. The only way to interact with it is through the pop-up. Here is my INI: [GTN] ; comma separated list of gauges gauges = GTN_750_1 [GTN_750_1] ; comma separated list of render targets. drawto = WINDOW, PANEL3D ; is the master device if true. MasterDevice = true ; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2 NavDbType = 1 ; connects to: 'PFC_GTN' or any '#PID' (#D067 for PFC_GTN) ; no value connects to first found, 'OFF' disables connection. HardwareDevice = ; hardware selec…

Hey everyone, so I love the RXP GTN750 especially for my EC135, but after the last update I can't use it anymore. I installed everything as I should, and in X-Plane everything works as well. But as soon as i start up the GTN750 in my helicopter, it says "Database not found". I checked in the DB Folder of the Trainer but everything is there as it should. Sadly this error makes the GTN750 unusable right now and I hope for fast answers, since I don't want to miss out flying with the GTN750. Kind Regards, Louis

Hi, appologies if this is a really supid question but if I'm in a plane with dual GTN 750 & 650 I manually enter a flight plan into the 750 is there any way to automatically syncrhonize with a 650 so the plan gets a copied across to that unit as well ? I can see you could pre-build the flight plan and load it from the catalogue onto each device but I'm wondering if there's a more ad-hoc way of doing it. Cheers

Hello, Can we use the 2 GTNs at the same time in the King air 350 to configure VOR to VOR flights. If yes, what should be done in the GTN setting?

My Navigation, Obstacle/HOT Line, Safe Taxi and FileCharts databases show as expired. My X-Plane 11 GTN 750 will show the route but it will not navigate, ie, it won't follow the flight plan. Garmin Aviation Trainer is V3.0.1.0. All databases claim there are no updates. How do I fix this?

Hi, I have a complete twin engine simulator with RXP GTN 750 unit on it and I was wondering how I can get the charts updated? Is this fully linked to the database provided by Garmin/Jeppesen or there is another way of doing it? I basically want to open SID, etc. I'm running the latest 3.0.0 database/trainer (gtn 6_70_29). Thanks, Filipe

I upgraded to version 2.5.28.3 of the GTN plugin recently and since then I have no garmin databases showing. I've uninstalled and reinstalled completely (i.e. the trainer as well) but still have the same issue. I'm not quite sure where to look from here! RXP Logs attached in case they're of any use. https://drive.google.com/file/d/16wIDdkyyDvWdhxdbhU_OiHAStToCWZnQ/view?usp=sharing

This last month I had to reinstall Windows and my simulator. Now, I can't find my key for my gtn750 to reinstlall it. Does anybody know how do I get my key from RXP? Greg

I'm new to flight sim. I have XPlane 11 set up and working at home. I just purchased Reality XP download of GTN750 ... but during the process it kept asking me to identify the location on my computer where XPlane 9 is located. I don't have XPlane 9. It won't load into the folder where I have XPlane 11. Now what?

For no apparent reason, my GTN 650 wouldn't come up in Xplane - the device is there, but totally black screen. I tried reloading everything except X-Plane itself and still no luck. I believe that the problem is caused by an update to the GTN Trainer, and it's incompatibility with the version of RealityXP that I have. I downloaded the RealityXP update, but it won't run because of a Trojan Virus detected by Total Defense. I looked through these threads, and it seems that all RealityXP can suggest is to ignore the warnings of antivirus, and, on faith of their word, let the software execute. There have been multiple complaints about the virus issue here in these thre…

I recently bought a new PC platform and am trying to make my RXP GTN 750 work... soooooo frustrating. I have already completed a Key Reactivation, however, I still get Invalid License. I would REALLY love to solve this problem. I can provide all purchase information... date, order #, activation key if needed. Would someone PLEASE help me get this problem solved. Thank you in advance for your help and attention in this matter.

I just purchased the RXPGTN-750-XPL to install into XPlane 11. The installer is looking for the XPlane 10 folder which does not exist as I do not have XPlane 10 installed. How do I proceed to install this into XPlane 11? Thanks, Howard

So after updating the GTN750 today 2-22-21 the GTN works, like it turns on but no databases are with it anymore. The files to which the airports are in the folder where it should be but the GTN sees nothing. Anyone have issues like this?

Hi there I am mainly using X-plane and I need to activate callouts when they are not available in the GTN screen. But I have no clue how to make this configuration work when it is not there. I am attaching a couple pics to illustrate what I mean... Thanks for helping!

Attempting to get GNT650 into Carenado Cardinal 177 panel. Only segments appear overtop of default Garmin 430 https://drive.google.com/file/d/1HzAh14RFG1nd2ZupsqtJYrYOD_ICg012/view?usp=sharing How and where do I set display parameters to ensure total coverage Spoiler [GTN_650_1] ; comma separated list of render targets. drawto = WINDOW, GTN_650_SCREEN ; is the master device if true. MasterDevice = true ; aviation db: 0: nav_db2_grm, 1: nav_db2, 2: nav_heli_db2_grmn, 3: nav_heli_db2 NavDbType = 0 ; connects to: 'PFC_GTN' or any '#PID' (#D067 for PFC_GTN) ; no value connects to first found, 'OF…