RXP GTN 750/650 Touch

What is the impact on framerate with the GTN 750, if any? Thanks

Hi, I tried to follow the instructions on p9 but had no luck. There is no 'import' key only 'delete all' and 'delete pending' greyed out... I copied your .gfp and waypoint files in folder FPLN at first in Databases (cf manual) and second in GTN (cf a post op RXP from nov 2017) , but no luck

I have bought both the GTN650 and GNS430 since this matches my SR20. does anybody has experience in combining them in one stack in the Torquesim SR20 Entegra? I can get 2xGTN650 or 2xGNS430, but not 1xGTN650 and 1 x GNS430. An alternative would be to use Airmanager, but there is no GTN650 instrument yet, and my knowledge is too low to make this myself.

Where on my harddisk can I find the Databases 2104 (May/June 2021)? It clearly loads it in the simulator, but I can not find that file on harddisk.

Is it possible to install RXP GTN 750/650 Touch into X-Plane 11 and have it show in the Air Manager GTN750 panel without showing on the X-Plane Cessna 172 instrument panel? X-Plane does not have a Cessna GTN750 from which to pop out a 750 window. Thanks, Alex

Hi all, I cringe asking about this after reading numerous and similar issues a few yrs ago but here is my problem which I could not figure out from previous posts: I fly the JF Piper Turbo Arrow iii for about 4 months and the GTN750 has been working great. All of a sudden the GPS stopped sending signal to the auto pilot. I happened in mid flight.... As a separate data point, the heading bug actually turns the plane while in GPS mode which it didn't do before (like it was in heading mode). I know how to use the plane/750 so I know its not a matter of the selecting GPS on the 750 or nav on the AP, etc. I also do not think its the little nav switch under the AP…

garmin 650 will not follow the flight plan.... goes to the first waypoint then thats it ... only with the G1000 s,,, the cessna 172 with steam gauges work fine, try the c172 G1000 or cirrus jet and it dont work.. Yes, its in GPS not vlog. thanks

Hello every simmers out there, i'm currently looking for someone who could make RXP GTN 750 config for Gulfstream IV by ghansen with touch. - Currently have config file for Gulfstream with GTN 750 on both sides but seems not clcikable, only works in popup.

Hi to all! I recently updated GTN750 by its own update. And before that,. all was running smoothly, i make flight plan in simbrief, and i import it via skyvector inside GTN750. After update, i can only see flighplans up to letter K...so all ICAO starting from L up is not visible. And i cant delete flight plans folder inside, i select all flightplans, try to delete them, it wont delete it. Strange... pls ghelp Well, i magae to delete all, and to finally load flightplan normally.

Hi all I purchased and installed the GTN 750 for xplane - no problems. Wanted to add the 650 to my panel but my mcafee anti virus is flagging the 650 installer as containing a virus Anyone else have this issue? I didnt have the problem with the 750 installer which makes me think there may actually be a problem with the 650

When I press the CDI I can't switch from GPS to VLOC Always stay on GPS The only way I can if I click on the main panel on the Button I can So the problem not come from X-plane 11 but from rthe GTN750. Please help.

So I've run into an issue here recently and it seems to be only with my Just Flight Turbo Arrow. Whenever I load up the airplane, the GTN750 screen is black and says rebooting in the bottom left hand corner. It only happens for this aircraft. It works fine with the Xplane 11 Default Baron and the Milviz Cessna 310. For some reason only the Just flight Turbo Arrow is having the issue. I can't get it to display. Anyone have this issue?

On my xplane 11, I go to the plugins on top left, find the Garmin 650 touch then set it to Master, Then I go down a bit an open the "settings" ... the master switch is ok but the others below that have a red paddle lock next to it... " connect auto pilot" etc. it only happens on one airplane,,, the others work ok? thanks

I'm having a problem with the 750. Does the 750 use the same flight plan folder as z-plane uses? If so, my flight plans are not showing up in 750. I've had nothing but problems with using the 750. I have installed x-plane on another drive and I'm getting the same issues on that install. Can not locate the flight plans and the 750 will not attach to the panel. I'm using the Milviz T310R. A great plane that preforms flawlessly. The only issue is I'm having the GTN issues. I'm thinking it's a windows issue. I'm installing x-plane on my laptop and I'll try it there and see is the problems are replicated there.

Everything works fine with the Popup window VR and non-VR, but I can't click the mouse inside the MOD panels (Bell 412 MOD and Bell 407 MOD) only the knobs work but not the touchscreen. Please help!

Hello , After a new installation of windows, I lost the card on my GTN 750 xplane screen. Thanks

Greetings, I have the Garmin trainer installed at: E:\Apps\Garmin\Trainers\GTI\Production\GTI__GTN__6_72\app-6.72.9\bin In my environment variables I have the following set: GTNAPPDATA E:\Apps\Garmin\Trainers\GTI\Production\GTI__GTN__6_72\app-6.72.9\data GTNSIMPATH E:\Apps\Garmin\Trainers\GTI\Production\GTI__GTN__6_72\app-6.72.9\bin The registry has the following: BinPath E:\Apps\Garmin\Trainers DataPath E:\Apps\Garmin\Trainers GTiExePath E:\Apps\Garmin\Launcher\GTI\GTI.exe The trainer works fine when I run it outside the sim, from within the sim, I just get a blank screen. Any hel…

Something weird happens as follow: (X-Plane11 11.55 OpenGL. Test aircraft: Airfoillabs KingAir350, Thranda DHC-2, Thranda PC-6, Aerobask Lancair RG, JRollon SF-260, Torquesim SR22, but only SF-260 did work finely) The first weird thing occurred about 2 months ago. It seems after 750's update, Airfoillabs KingAir350 start to against 750. The GPS/NAV/Autopilot doesn't connect to 750. However, there are more and more aircraft starting to go wrong with it recently (I’m not sure if their problems occurred at the same time as the AFL350’s problems, it might be that I didn’t immediately notice them.） Let's be more precisely: As we knew, there are 3 pages is showed…

Hello, The first time I imported a flightplan from Little NavMap, it worked fine. So I planned another flight and this time the 750 reported locked waypoints. In this case, I had selected named intersections and a few lat/long user waypòints. The 750 would not activate the plan and offered no way to edit or delete offending waypoints. In reading other forums, there is apparently a discrepancy between the AIRAC in the Garmin (outdated) and the one in Little NavMap (always up to date from Navigraph). However, there must be a way to use user waypoints. Has anybody found the solution????

EDIT: NavDbType = 1 (was set to 0) XP11.55/ B1900 GTN 750 Worked before update now there are no airports? "no airports within 200mi" Any ideas Jon

Hi! I’ve been trying to figure out where the flightplan you store in the GTN750 in game is stored. I’ve searched the forum, but with no luck. It’s not stored at c:/programdata/garmin/…./FPLN Any ideas for me?

Hi, i want to remove waypoints but i cant, i dont have direct and they are not in FPL. Please help me, it irritates me a lot.

Hi everybody! If bought the 750, could I get the 50% off for the 430? Thing is the aircrafts I'm using are better covered with this pairing.

I want to export a flt plan from my little nav map to my RXP GTN 750, but when I go to the "export to"...Garmin isn't an option. Any ideas? Thx

Hello, I built a new PC and am getting ready to reinstall P3Dv5 on it, so for my RXP modules, when moving them to a new PC, do I need to deactivate the license somehow first? The old PC is going to be disassembled and parted out, I will be re-using the game drives but I'm doing full formats. thanks