RXP GTN 750/650 Touch

I get this message when I try to download the E-Commerce Installer. I searched and found other with similar issues but the solutions were too old to apply. Microsoft help was as usual no help. It may have something to do with the company supplied virus SW. Is there a work around?

Hello, I have the GTN750/650 + RXP530/430 all installed well except the new GTN650 that connection test failed, so something wrong with the flight1 wrapper. I redownload it from RXP store and still the same issue. Thanks You

Hello im looking for support, I recently bought the GTN 750 to update the navigation of my B727, the problem is that it doesn't fly the gps approaches even after i activate approach command on GTN, i see all tutorial on YT, for the real unit and for RXP, l and guess that should work but no, even the holding patterns not work too, is there any special configuration or setting so that the old autopilot follows the instructions of the modern GTN?

I am constantly getting a daily box pop up in windows to update my RXP GTN 570 for X plane 12 .if I say "skip this version" it makes no difference Back it comes next day... how can I stop this? I dont WANT to update , until its officially working in XP12 (which my old version currently is and the new version probably will break it ) thanks

I'm sorry for asking but today I had to reinstall XP11, a new install. So I installed the GTN750 and it works fine in my XP11 but why am I getting red locks? Thanks you kind sirs.

Windows 10.0 (build 18362/2) [RealityXP.GTN][- ] # win.xpl version 2.5.22.0 Aircraft/X-Aviation/Saab 340A/Passenger Variant/LES_Saab_340A.acf RXP GTN 750 installs fine on other aircraft. I have reinstalled LES SAAB 340 & RXP GTN 750 multiple times. I cannot get the RXP GTN750 to appear on LES SAAB 340 panel. Popup window works fine.

I really wish they'd stop doing whatever it is they do -- the latest update (1.6.3) bricked my 3D integration of the 750 again. I'm finding the waypoints are not populating sim/cockpit2/radios/indicators/gps_nav_id (even with the option update simulator GPS waypoints.) Bugs me out as this plane is very nice with the 750. PS. I didn't post on the XA forum because they are not receptive to a 750 (because they all use Mac's.)

Hello, I know there are lots of posts already regarding nav updates, but all of them pertain to using the Trainer app, which Garmin has moved away from. I have a real world GTN650 and subscription so I would like to use it on my virtual one; however, I am unable to transpose the instructions for the trainer app to the new Aviation Database Manager app. Is there already a post that deals with is that I've missed or instructions for how to do so? Thank you!

Hi, trying to upgrade the latest TXi Garmin Trainer launcher from v3.3 to v3.4, the updater is noticing that the download SSL cert is not valid and so won't download the artifact. can you please advise ? screen shot here; https://www.dropbox.com/s/61cjj5g1p3wkthu/Garmin%20Trainer%20v3.3%20to%20v3.4%20ssl%20issue.png?dl=0

Is there a simconnect or the likes command that I can assign to my alpha yoke that when i push a button it toggles the message window, vice having to mouse over to it and click on it? Actually while I am at it how about the same thing for the connect button that has to be pushed at the start of each power up? Thanks Tom

So I purchased reality XP for my X-plane 11 program a while back. Went to use it again today and it needed the garmin trainer software updated...easy enough. So I download the software after what seemed like an eternity. When I go to configure Reality XP it says it can't find the Garmin GTN trainer again. I downloaded the appropriate version Garmin trainer 2710, but not sure how to point it to the right folder now. i have tried to browse and locate the folder it's in, but it doesn't seem to ever find the file. Please help!

hello, is it compatible with x-plane 12? and if so, how do you install it? because it is not detected, it always points towards x-plane 11. Thank you

Running X-Plane 11. The GTN 750 has a greyed out button for "load airway" from a VOR fix. the GTN 650 in the same cockpit shows the button active. Is this a configuration setting? Not sure how it ended up in this state. TIA

Hi! I have left RXP for a while and now I want to use XP again. I just wonder what the latest database version for RXP is now? How can I update it if mine is out of date? Thanks!

My newly installed GTN750 to XP11.55r2 came up blank as though it had no database. Surprise, it didn't! Should have RTFM'd a little harder. Please disregard my baseless complaint.

rxpGTN-750-XPL wont install to xplane 12 how come ????

Hello, I am running into the exact same issue as was resolved in topic below. I need to add the "REALITYXP 1" setting to the options file. Does anybody know where the equivalent options file is for the Carenado T182? Thank you.

I'm flying the Xtrident B412 with the RXP GTN 750 addin, and LuaNG. the connection and operation of the GTN is working fabulously. My issue, with the settings for the GTN to control the Auto Pilot, and having it track based on GPS NAV....... i discovered, that after i have my route plugged in, and trying to get the NAV to capture, I'd use the HDG mode to ensure proximity tolerance to the DTKE. Nav would capture momentarily, then it'd enter into a turn AWAY from the DTKE. not good. next the only work around is to go up on the menu plugins, select RXP GTN1 set master, and Unselect it, then repeat, and immediately Reselect the GTN1 as Master. NOW it will track the…

When can we expect Xplane 12 integration

hey There Folks, I was able to install the GTN 650 in my xplane 11 version but when I launch xplane and try to input a flight plan the database is missing . During install I receive this error: ! Setup Setup detected an error. The Garmin Trainer installer is missing from either: C:Users\.......GarminTrainerSetup_3.2.3.0.exe C:\ProgramData\Reaityxp\GtnTrainer\GarminTrainerSetup_3.2.3.0.exe Any ideas on a fix would be greatly appreciated!! Thanks in advance. Bill

hey There Folks, I was able to install the GTN 650 in my xplane 11 version but when I launch xplane and try to input a flight plan the database is missing . During install I receive this error: ! Setup Setup detected an error. The Garmin Trainer installer is missing from either: C:Users\.......GarminTrainerSetup_3.2.3.0.exe C:\ProgramData\Reaityxp\GtnTrainer\GarminTrainerSetup_3.2.3.0.exe Any ideas on a fix would be greatly appreciated!! Thanks in advance. Bill

Hi, Somehow the date shown in the GTN (system-setup date time) is not synced with the PC. (it is march 2022) When I check the GTN in the Garmin trainer it does show the correct date. I have problems posting the JPG in this post, so I hope it is clear enough. Any ideas? Thanks, Pieter

Trying to figure out a contact for an accidental purchase. I was under the assumption X-Plane 12 GTN750 would work. Want a refund of my $50. Plus I didnt event get the discount.

Good Day Ive tried all possible combination of settings to get the GTN to fly the NAV plan but it refuses. Flies a perfect automatic ILS approach but doesn't connect to NAV mode on the AP. Any help is appreciated Jon

Hi, I have been using the GTN 750/realityXP software for years. Now I had to move to a new PC which came with Windows 11. I installed the software and all seemed well, except I had to redo the popup window, drag it to the right location on the second screen (RealSimGear GTN750), and then use it. All seemed fine, except when I started the simulator again afer a break, the window didnt show; it was small, hidden behind the XP11 screen and I couldnt get to it, unless I usd the option reset window from the menu and manually again went through the steps of moving the popout windo to the second monitor. Anyone having had this problem before? I checked the .ini…