RXP GTN 750/650 Touch

Has anyone used the aviation data supplied by Keyvan?

RXP-GTN750: Problem: - Bendix King KAP140: when clicking NAV pushbutton, the NAV mode does not engage. Additional info: - XP12 version 12.1.2-R2 AirfoilLabs C172NG ANALOG version 1.0.4 - XP12 -> Reality XP plugin menu -> Settings: Settings panel shows all "Locked device settings". Unable to access any Panel Instruments or Device Options. - With the default GNS530, no problem, I am able to Arm NAV and Engage NAV. - Re-installed Reality XP_GTN750, but the problem remains. Thanks in advance for any support, Frank RealityXP GTN ini file content: [GTN] ; comma separated list of gauges gauges = GTN_750_1 [GTN_75…

Greetings, I'm using the 737 version 3.41, along with RealityXP GTN 750 version 2.6.2, on X-Plane 11.55r2 I don't know which end the problem is coming from, but the aircraft's autopilot is incapable of following the magenta line properly (insufficient bank angle, intercept angle, wrong direction, etc.), especially with concentrated waypoints. I use the GTN as a popup master GPS device to simulate northern Canada operations, and it used to work just fine with previous versions of the GTN and 737. For example : If I DTO a fix behind my aicraft (already in VOR/LOC mode, both FD and AP), the GTN will draw a right turn magenta line, but the autopilot will start …

Hi Folks , I am looking at your product called Reality XPGTN 750 Touch™ (X-Plane) X-Plane 12/11/10/9 (windows only). I see that this is a glass cockpit type software for X-Plane . Can I retro-fit this into an existing x-plane aircraft that does not have a glass cockpit ( eg : the Tiger Moth ), or will it only work if the airplane has a current Garmin 1000 glass cockpit ? Also, does this ONLY work with a touchscreen monitor, or can I interact with the software using a mouse ? Robert

I have the 650/ 750 hardware stack from RealSimGear using Reality XP. i have many planes both XP11 and XP12 and both the 650 and 750 populate to the correct RSG device and work perfectly in every plane i have EXCEPT the Laminar Lancair Evolution ? the 650 screen is blank both when first started and continuing to being placed in the correct monitor ?? 750 works fine. avionics switches are all ON. any ideas how I can get it to work ? The Lancair is such a cool plane and I would like to get the 650 working....... HELP please i updated to the current Reality XP installer and have the current RSG software. still remains blank.....

Hallo, After last update my licence doesn't work. I've made many new installations and no success. During installation verification correct but when trying to use doesn't work. X_PLANE 11 as well sa X-PLANE 12.

Hi, Could you please let us know if the latest GTN 750 trainer works with your module in XP12 ? I keep getting 139 error when loading. from the .log file: 24/07/22 03:30:55.254 01476 ERROR] %1 is not a valid Win32 application., code: 000000c1 24/07/22 03:30:55.301 01476 ERROR] failed: CDP.DLL 24/07/22 03:30:55.301 01476 ERROR] %1 is not a valid Win32 application., code: 000000c1 24/07/22 03:30:55.346 01476 ERROR] failed: CDP.DLL 24/07/22 03:30:55.347 01476 ERROR] %1 is not a valid Win32 application., code: 000000c1 24/07/22 03:30:55.381 01476 ERROR] failed: CDP.DLL 24/07/22 03:30:55.381 01476 ERROR] %1 is not a valid Win32 application., code…

This is a bit different from the 'Black Screen' problem I have seen discussed. Problem: I am flying along in Windows 10 or Windows 11 with XP11 or XP12...doesn't seem to matter...and I wish to go direct someplace using the RealityXP GTN 750. I enter the destination and I get the "Activate?" button. I touch the Activate button on my touchscreen in Air Manager and the GTN 750 instantly disappears leaving me to see through the hole to the desktop. I have to go to the Plugin RealityXP GTN 750 pulldown menu and click "Show Screen" and it comes back. Has anyone else experienced this? I have searched the forums but don't see any discussion. Not sure, but I don't think the …

Hello, I have updated the RXP GTN 750 to v 2620 and when I open the gtn, the message appears on the first screen: Invalid license: contact vendor

I have X-Plane 12.08rc3 with the RXP GTN 650 and GTN 750 installed. RXP GTN version 2.6.1.1 (update info shows 2.6.1.0 but I installed 2.6.1.1 ...). On RNAV approaches with vertical guidance (LPV, LNAV/VNAV etc) the aircraft HSI shows "NO GP" and vertical DI info is not shown. Problem demonstrated with the LR Baron 58 + GTN 750 and LR Cessna 172 G1000 + GTN 650. Laminar Research tells me the issue is 12.08 introduced a new dataref: sim/cockpit/radios/glideslope_signal_valid[4], which needs to be set to 1 for GPS approaches with vertical guidance. I verified this with a LUA script. I hope RXP can provide a fix in an upcoming release.

Hi. The GTN 750 screen is showed without a problem in the 3D panel and in VR, but when I tried to click over the GTN screen on the panel in VR is not working, only show an arrow and not the hand. If I make the pop-up windows appears, I can click over that pop-up and work perfectly and the changes is showed on the panel too, but I cant click over the screen in the panel. My GTN.ini [GTN] ; comma separated list of gauges gauges = GTN_750_1 [GTN_750_1] ; comma separated list of read only settings. locked = MasterDevice, NavDbType, HardwareDevice, HardwareIdx, LinkCrs, LinkObs, AutoNavGps, UseAudioPanel, UseTransponder, AutoGpsSource, AutoNavSour…

I can't seem to get GTN750/650 to work as a part of the 3D panel in X-Plane 12 (I was trying Laminar Baron 58 and Cessna 172). I understand that adding 3D panel to any aircraft in X-Plane 12 isn't really difficult - is there any definitive guide how to do that?

Hi, somehow my VOR shows no deviation on the cdi when I dialed in different VOR frequencies and changed the course. I use the 650 software in a C172 with two G5s. The GPS does work and shows the deviation to these VORs but not the CDI. How can I fix this?

Hello, since I did not get a reply from the RXP support via mail I will try it here. I bought the RXP GTN 750. After some fideling I got it working. But then I saw, that my full name is shown on the boot up screen. Since I stream some of my flight sim session live, I would like that to match my nickname so my real full name is not shown on the internet. Does anybody know where I can change that? Thanks and kind regards -- arl

Is anyone else having problems upgrading the X-pLane GTN plugin to version 2.6.1.1? When I choose the menu item "Check Updates...", it says: RealityXP Garmin GTN 2.6.1.1 750/650 is now available (you have 2.6.1.0... After the download (and quitting x-plane) ,when I run rxpGTN-XPL-Setup that was inside rxpGTN-XPL.zip, it correctly uses my x-plane folder as C:\X-Plane 12 and reports: X-Plane 12 location: C:\X-Plane 12 Destination location: C:\Program Files (x86)\Reality XP\GTN Simulation\X-Plane Additional tasks: Create a desktop shortcut Subscribe to product updates notifications …

I use the GTN 750Xi connected to a Baron B58 and X-Plane 11.55. I have connected the GPS to the HSI. When flying an LPV approach, e.g. to KSEA RWY34C, the Baron overshoots the glide path constantly - I can see this by looking at both the HSI and the dataref gps_vdef_dot as shown in the screen shot below. The autopilot indicates that the approach mode as well as the glideslope mode is coupled/active. Is there some configuration missing on my end. 24/04/03 14:28:51.063 13784 - ] # win.xpl version 2.6.1.0 24/04/03 14:28:51.063 13784 INFO ] 24/04/03 14:28:54.679 13784 INFO ] using GTNDBFILE = "D:\Garmin\Databases\nav_db2.bin" 24/04/03 14:28:54.…

Hi, I just bought the RXP GTN 750. When I open the plugin window, after a while xplane begins to lag/stutter. Framerates are still fine. It feels like "time bending" every few seconds. Vanishes if I close and re-open the plugin window I think. Any hint what this could be? Thank you!

This issue happen a while ago and I just quit using the product. I am not training in real life in a plane with the GTN650 and would like to be able to chair fly in my sim. I have uninstalled it and reinstalled it. it keeps saying I have an update but when I update it it says its the most current update. The 650 will open in xplane 12 and a msg flashes that software is expired contact vendor. I searched how to contact the vendor and now I am here. after 4-5 minutes the gtn screen goes fuzzy and says software outdated or expired. I tried to find an email from buying it but that was back in 2021. I noticed that my account on here was made inactive as well. I created this ac…

I purchased GTN750 for use in XP12.09 and every aircraft I try to use it in ie: shenshee 720 or Lancair Evolution by Laminar, I get the same result. Is it that I don't have the setting correctly? I have the 1st 5 boxes regarding integration wit AP checked. Aircraft just circles around and will NOT intercept 1st waypoint even tho I click "activate leg" There seems to be no help on youtube or elsewhere on how to set up the AP integration Thanks

I am trying to update from GTN 750/650 (XPlane) V2.6.1.0 to V2.6.1.1. 1) I have downloaded the latest version through the "Check Updates" drop down menu. Unzipped the file and ran rxpGTN-XPL-Setup.exe - Result: "Check Updates" reports that V2.6.1.0 is still installed. 2) Removed the rxpGTN folder in the plugins directory under xplane 12, ran rxpGTN-XPL-Setup.exe - Result: "Check Updates" reports that V2.6.1.0 is still installed. 3) Uninstalled RealiatyXP Garmin GTN (X-Plane), Removed the rxpGTN folder in the plugins directory under xplane 12, Removed all RealityXP.GTN.txt and RealityXP.GTN.ini files and performed a fresh install using the latest rxpGTN-750…

I've spent too much time searching around but can't find the answer. Simple question: Do the Reality XP products work on Linux? I do have a XP-12 installation on Windows but the performance is nowhere near as good as on Linux. I don't want to buy this product if it only works on Windows.

Hello, I want to use GTN 750 on 2nd screen in VR but i can't windowed mode on VR When i use X planne without VR i can widowed GTN 750, but when i use VR i can't. Do you have a solution ? Thank you valentin

Hello, As silly as it seems some people among us don't have the money to buy a $300 subscription for Garmin's navigation data. This is frustrating because of the fact that I want to do many flights on VATSIM or somewhere where procedures are critical, and having months old data is not really feasible. The question is really how hard it is to transition from Garmin to Navigraph for the data?

I installed the newest version of the Gtn750. then i goto gtn,settings, ucheck for updates and it still says new version avail. how do i manually fix this?