RXP GTN 750/650 Touch

Hello.After update for new version 6.7.0 or 6.72.9 not start up Garmin GTN750 in any airplane simply black screen no database not found,charts not available! Can you help me what it can be? P.S. All reinstall many times X-plane 11, GTN750.

It seems the GPS waypoint coming from reality XP only updates xPlane the first time...after crossing other waypoints the current waypoint in xPlane does not update. I am using sim/cockpit2/radios/indicators/gps_nav_id. in my cockpit gauge. Any thoughts? Thanks Leslie

Not able to unlock device settings XP 750 in my Airfoillabs King Air 350. Therefore I should purchase and install the XP 750, but.. I already did that. There is also a reference to the Garmin Aviation Trainers app, but when I execute it tells me that the app is installed, although I cannot find that file in different directories. I downloaded the zipfile "GTN_GDU620PCTrainer_6211" but the "Trainer" lacks everywhere I looked. In different airplanes the plugin does not full function. The GTN 750 is a fantastic addon, so please help me...:)

Hello, We have two GTN650s that we use with X-Plane 11 for our cockpit. Some days ago we had some issues with the internet router and had to change it. Since then we get this message:"Invalid licence....".("Licence locked due to commercial use") I have tried to reinstall everything( Garmin Trainer, RealityXP, RealSimGear plugin, even the windows registry). Nothing worked. The licence is linked to the Flight1 account. I can't find a way to make this work. Do you think that maybe buying another licence would solve the issue, or maybe I am missing something? Thanks!

I reinstalled the GTN 750 into X-Plane 11.11 on a freshly built Windows 10 system, but into an existing X-Plane installation on a data disk. When I try to use it with the JRollon Jetstream J32 either it shows a blank unresponsive screen, or if it does come up it states 'Invalid License - Contact Vendor'. I guess I am contacting the vendor by this post. What is going on? Worked very nicely until the complete reinstall.

reality xp gtn 750 function ( choose departure runway and procedure ) is ignored and Pilatus PC 12 Plane uses a different heading

Hi all. For some odd reason, either downloading the GTN750/650 suite from the RXP website, or updating it from the app, trying either, I get warnings about a virus and the download is cancelled/deleted. I have scoured the web for some kind of solution and the last post i have found is from 2019. Anyone have experienced this? Is there a workaround? Thank you in advance.

Hello all! I didn't see if the GTN 750 is available for MAC x-plane users... Thanks! Don

Hello , I have a big problem with the GTN750, every time I start XP12, my GTN750 is rebooting !!!!. I changed in the setting for the avionic. I tried everything the bus, the bus1 nothing changes. I tried to remove the ini file, the XP preferences, nothing to do.

First...I've been using the RXP gear for years...it's amazing! I'm licensed for the GTNs, and we've actually taught r/w pilots to master new-to-them r/w GTNs in the sim. Electricity is SO much cheaper than 100LL! For reasons too ugly to mention, I needed to move my X-Plane 11/12 to a virgin install of Win10. The XP11 was a was a working copy with the RXP GTNs already installed. The XP12 was a newly-licensed XP12 download and did not have the GTNs installed. I copied the sub-directories of both to the SSD with the new Win10, grabbed the latest installer, and ran it. Usual procedure...it asked for the directories of both copies of XP, and fired off. Of course, Gar…

Hi, I bought the GTN 750 yesterday and am super happy with it. I saw on the website a mention of Is there a rough estimated time for this to be available? Will the EIS 700 be available as well?

When I set a flight plan or direct to in the 750 the auto pilot does not respond in the GPS1000 or the Saitek panel. Also the magenta line does not show up on the 1000.

Hi! Is there a Navdata update for GTN750? I am asking because I find that many SID or STAR cannot be found in GTN750 while making a flight plan according to SimBrief. Thanks!

Good morning/afternoon/evening to all.I purchased the Garmin GTN database 599$ to try to update my RealityXP but all tutorials I have seen unfortunately doesnt match my system. Everything is working but with the old database 21xx if I am not mistaken, but I dont have any files or folder at ProgramFiles from Garmin. Anyone know if the procedure changed to update the Rxp from Garmin Trainer?Appreciate any help.Thanks

Is there going to be an update to allow the software to work with X plane 12? Currently it will only allow you to install into X plane 11 folder. Thanks

i went to the reality xp site and saw that it now says the 750 has xplane 11 and 12 so i purchased it for xplane 12,. when i paid and opened the wrapper it says not valid for xplane 12.. help...please im sure im not the only one the wrapper say 12 but had no 12 install option. please assist if able . if i was wrong looks like i just purchased the same 750 for 11 for the 2nd time... advice please Peter

I am unable to install to XP12. When I try to run the installer is tells me I have 2.6.0 installed but it is only in XP11. I have tried to run again and over write but no success. I sent an email/service ticket to support a few days ago but there has been zero response.

Hello, I would like to integrate the GTN750 into the default C172 for XP12. GTN750 is working as window, but I`m not able to get it visible at the panel. I removed the default GPS so there is enough place for the GTN and it would not be overridden by an obj. Is "frame.type=PANALES" the same as PANEL2D + PANEL3D? I tried different coordinates, but it is not shown anywhere. Did I missed anything? Please ignore the navtype and other settings, at the moment only the visibility is important [GTN] ; comma separated list of gauges gauges = GTN_750_1, GTN_750_2 [GTN_750_1] ; comma separated list of render targets. drawto = WINDOW, PANEL3D ; is the m…

I fly a Cirrus Torquesim SR22 model with GTN750 and GTN60. Currently, the 750 is in GPS1/NAV1 position and GTN650 in GPS2/NAV2 position. I would like to swap them. Changed which one is Master device, tried Settings, Gauge Options to assign Radios an and GPS source accordingly, but no luck. Is it possible and how to do it?

Hi, I tried to use the GTN750 v7.20 instead of the default v6.62.4. I read in the manual that one could do that by specifyng the path to the correct simulator. After installing the trainer package for the Garmin GTN750, which installs several trainers at once in a default location on my c-drive (in ProramData), the path to the other trainers was found easily by checking in task manager where they start the trainer (GTN Simulator.exe). However, the log files shows me that the path is invalid (??) while it exists and indeed contains the simulator used by the GTn trainers. The win.xpl file states even it is using those paths. Any idea what I am doing wrong? …

Hi, when using the GTN with the JustFlight Turbo Arrow, which has no HSI but a simple DG, logic dictates that the HSI-related options should be off and one should enable "Connect GPS to VOR1 indicator". This works fine but the problem is that this also replaces the DME distance for NAV1 with the distance to the next waypoint, if the GTN CDI is set to GPS. I saw that this is a known issue since years, and I was wondering if there is any hope to have the DME distance indicating the actual distance to the station tuned on NAV1 irrespective of the CDI setting.

Hello, today I bought the GTN750 for Xplane 12. In no Plane work the GTN750 correct. The GTN750 just pops up and will not replace the default GPS. Best Regards Ralf

I have been looking for a skin or bezel to run on the RealityXP GTN650 in Airmanger with Knobster in XP-11. Short of designing my own skin (which I'm in the process of doing) I modified the existing bezel for the GTN750 (available in Airmanager) by changing its dimensions in Airmanger. What you end up with is a slightly distorted bezel (the knobs are out-of -round but the buttons and knobs (using knobster) are fully functional. I'm attaching a pic of my Airmanger panel which I designed to replicate the instruments in my Cessna 172. I actually have a Garmin GPS175, not the GTN650, but the panels are the same size and the GPS functions are almost identical. The plan …

Hello, I have read several posts but I have not found the right answer. The software comes with the North America charts. They work well. Why aren´t there any European charts? If I choose in the settings the Worldwide Jeppesen there isn´t any chart shown. No European ICAO.xxx is in the charts folder. Second, I have the real files on the SD card from my real GNT Garmin/Jeppesen but everything realted to chards is not read by the XP Reality GNT750. Any one knows how to change file names or extentions to make them work? Thanks for any hint. cheers GVT

Hello, I've update my Garmin 750 to X-plane12 but don't work. when I open the plugins to configure the popup from x-plane12 , it gives me the following message: GTN: failed to open simulation ( see image 1) If I go to Garmin Aviation Trainer to verify that I have downloaded the panel software correctly, it gives me the error shown in the photos below, and there is no way to go on. I don't know what to do.