Pilot2ATC Bug Reporting Forum

I'm flying towards San Francisco and the ATC assigned me the BDEGA1 arrival with CORKK transition. Checking my 767 FMC and the KSFO charts and can't find the STAR in question. There is BDEGA 2 though. Is this because of the oboslete NAVDATA?

I have noticed on a few occasions that Pilot2ATC is reporting an active Runway (at either departure or destination, sometimes both) that is not correct given the METAR for the airports in question (both NOAA in Pilot2ATC and ASN's weather). Provided one has set the ATC determines SID, STAR and APPROACH config. options off, one can, in some cases overide this. In certain instances one cannot (see later), and this also means that leaving the STAR and APPROACH selection up to ATC leads to problems - being assigned an approach that is downwind for a tailwind landing that in some cases may be minor tailwind that one can accept, at other times is dangerous. In both cases this …

Hi Running X-Plane 10.45 (final) and Pilot2ATC 2.0.1.4 XPUIPC installed Went along the manual to install Pilot2ATC X-Plane is running with JAR A320,most plugins disabled, batts and external power on, radios on. I start P2A, I can create FP, map window is working fine,... The only thing is: it is not connecting to X-Plane Tried to experiment with the callsigns in XP and P2A Beech in Airline/manufactorer and N341VB in flight/tailnumber in P2A and N341VB in tailnumber and Beech as aircraft name in XPUIPC/ATC setting and all variations tested also. Without success. Anyone can give me a hint ?

This morning flying from MCO to IAH I kept getting a "You are off course message" I can't for the life of me figure out why as I was headed to the correct waypoint (or at least I thought so). Attached is a screen shot.

Hey Dave, My actions -Created, validated, and filed a VFR flight plan KDAL direct KAUS at 12,500. -Requested flight following from KDAL clearance but received no response. -Requested ready to copy VFR clearance and got my response -After departure with tower, I am told frequency change approved but not handed off to another controller. -From this point forward its basically radio silence, I try calling up nearby departure frequencies to request flight following but I receive no response. -Nearing KAUS, I call up approach and tower and request landing but get no response. Potential cause -I'm exclusively using SayIt. I noticed that after my departure, non…

I created a flight plan from KFCM to KTOR. The first waypoint in the plan was ONL. ONL Is the end point of a SID. The flight plan validates but when filed it produces an Unhandled Exception error. I then added added two waypoints between KFCM and ONL and the plan filed successfully. Is there a limit to the distance between waypoints? ONL is 267 miles from KFCM.

Dave...finished my first complete flight....wife sleeping ....so I used "Sayit" during the last part....grin...nice edition....I thoroughly enjoyed the; 1. Flight planning including SIDS and STARS additions....see notes 2.Voice recognition part, and I hope this will be a VoxATC / Aivlasoft EFB replacement.. here are some notes and findings 3:12 AM 7/1/2016 P2A_200 User Guide.pdf Page 17 Can't insert departure AP KSFO as Departure with right click -was able to load KLAX as Destination with right click Page 21 entered Cruise Alt of 180 Showed FL 190 *PIC* Page 22 had to click validate after changing GS and Dscnt Rate under 7:04 AM 7/1/2016 Clicked autopilo…

I took off after getting takeoff clearance, then no ATC communication. So i ask for the departure frequency and get a crash. See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at P2ASpeech.Controller.GetInformationResponse(String& Rtn, ATCController ATC, String RequestType, String Location) at P2ASpeech.Controller.as(String& A_0, SpeechInteraction A_1, String& A_2) at P2ASpeech.Controller.RespondToPilot(SpeechInteraction SI) at P2ASpeech.ATCListener.HandleReco…

After upgrading to this, speech recognition does not work at all. Everytime I say something it errors: See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at P2ASpeech.Controller.RespondToPilot(SpeechInteraction SI) at P2ASpeech.ATCListener.HandleRecognizedSpeech() at P2ASpeech.ATCListener.a(Object A_0, RecognizeCompletedEventArgs A_1) at System.Speech.Recognition.SpeechRecognitionEngine.RecognizeCompletedProxy(Object sender, RecognizeCompletedEventArgs e) *********…

Dave, When clic on file, i have this error message : See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at P2A_Controls.ucFltPln.t(Object A_0, EventArgs A_1) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Mes…

Hi, I just upgraded to v.2.0.1.2 from a previous beta (not sure what version, v.2.0.33 i guess), and i noticed it responds very slowly: select SID or START, change Cruise Alt,... any operation takes about one minute. That was not happenning with the beta. I'm creating a simple plan from GCFV to GCLP, nothing specially complex. Please would you confirm if this is a general issue, or something related to my configuration ? Thanks,

Thank you for releasing v2 for trial i installed it today (v2.0.1.2). In Xplane, it does not seem to track the speed or altitude. When flying it has 1 in TAS and GS. I'm using the PSX 747. Also, it did not want to give me a taxi to gate at CYYZ as it said there were no gates! I will try with my next flight to KBOS.

So lately I've noticed a few times that ATC seems to have 'lost' me and basically tells me to turn around. Seems to happen with a variety of flight plans I've used all generated from PFPX or EFASS. An example was today from JFK to ATL, ATC didn't assign a STAR, so after takeoff I went direct to CRI when it seemed to expect to head to DEEZ. I tried using what I thought was a direct to waypoint option in P2A (The D with the Arrow through it), however I couldnt get P2A to see that I wanted to continue on my way (EDIT: Just reread the manual, that was user error.). Ill have to start keeping better track of the flightplans, but there are a few occasions where ATC appears t…

I just tried contacting clearance @ KIAD and the specified freq that P2A appears to be looking for is 135.69. However I think this should be 135.7. PS - P2A is coming along nicely!

Quote I've updated the base download Database slightly to correct a couple of issues reported during the Beta so far related to frequencies at various airports. Otherwise, this download is the same as the latest update 2.0.0.32. If you are not having issues with 2.0.0.32, no need to update. WARNING If you do download and install this, it will replace your Databases, Sound files, etc. If you have updated any of these, then you should rename the Pilot2ATC_200 main installation folder to something like Pilot2ATC_20032 before you install the new version. Then, you can copy any of your updates from that renamed old folder to the new installation. Dave end quote My q…

Dave, When I clic "DISPLAY ROUTE", I have this message : See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at Pilot2ATC_200.frmTaxiwayMnt.FindAndDisplayRoute(Airport Apt, Runway Rwy, Boolean allowRunwayUsage) at Pilot2ATC_200.frmTaxiwayMnt.a(Object A_0, EventArgs A_1) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.…

Hello, When i save charts in TERPS, i have error message. Error Message : See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Users\Mikoul\AppData\Roaming\Pilot2ATC\Settings\URLVault.xml'. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath…

I first make all my settings this goes smoothly.Once ready i call using call letters and state ready tocopy ifr clearance.They correctly reply.I repeat then i get transferred to ground for taxi.Then on approach to runway i,m told to contact tower,which i do. and say boing 251 ready for departure 25right.They reply go to ground and a freqency which is wrong.As instructed i ignore it then take off after a few attempts.Once airborn i contact departure as usual and get a have a nice day.However the assigned frequency remains the same.The only way i can move on is follow the frequency chart supplied and contact the next ctr as i guess.Thanks David please advise or i will wait …

Hi, ihave 2 big problems: - the charge of routes sid, stars, appr is too slow now. -fying in ifr Atc said thah i am out of course and change me heading but never said again to change again to my course. I am in course and change always near aproach. Others version works fine. las flight: LGAV PIKA1E PIKAD UL53 KRK/N0462F400 UL995 TIGRA UT75 EKTOL UL995 TEA UZ803 LAT LAT1D ( RATIR) LIRF

Hi Dave, I have noticed other my last few flights that when trying to export flight plans from the Real World Flight Plan database that they are not importing across to the main FP panel in the correct format. I have just tried EGLL - EKCH and EGLL - EGAC ,the former imported the dep/arr airfields whilst the later imported Dep/Arr and two other waypoints. Can you check this out please?

In P3D v3.2 last night from MCO to FLL, on approach to FLL approach (who didnt provide any STAR) handed me off to tower, (who didnt provide any runway/approach info). I checked active runway via the info tab in P2A which had only dashes. I contacted tower requesting active runway, which replied 10L. I requested landing on 10L and got an exception error and P2A crashed. I can see if I can duplicate this if needed.

I have completed a successful flight with P2A (LEVC-LEBL) ... has only missed one little thing: when Ground, Tower or Centre told me current QNH, said "...qnh one..." (missing the last three digits) when I expected "qnh one zero zero niner...". Nevertheless, I answered "qnh one zero zero niner", P2A does not recognize, and it kept saying "qnh one"...then I forget this and continue with the flight I take this opportunity to ask for "a wish": Would it be possible (and realistic) that the SID and STAR were spoken and acknowledged by voice by name, or at least pronounced with ICAO phonetic alphabet? Best regards

Don't know if this is a bug or not but here goes. I have flown about 6 IFR flts from KSTL to KORD The flts go well. I have to manually fly the A/C via the autopilot in order to follow the legs of the Flight Plan. However when I get to KORD at about 50 to 100 miles out vectoring will cease and ATC will tell me that I'm cleared for The ILS approach. This makes me do my own heading adjustments to intercept the localizer. In Radar Contact and when I flew in real life ATC would give me vectors all the way to intercept the localizer and tell me to take over and complete the approach. Also to contact tower. I haven't tried any flights to other airports to see if there is any …

When I try load SID ARAC4A then open a windows like this: Sorry for my english.

Hi i am in beta version 2.0.021 my flight plan is approbed but when i call to take off: your flight plan seems to be out of date. Please file a new one and call back for clearance.