FS2CREW: PMDG 737 NGX REBOOT

From time to time my FO does not answer. When I test the Audio I don´t hear anything. Audio reset is always not successful even when I repeat it several times. It is very uncomfortable to restart P3D because of the Audio problem. Is there another possibility to reset audio for example by restarting a service in task manager? If I have the same problem in my PMDG 777 the audio reset is nearly in all cases succesfull. Is there a difference in the resetting program between 737 and 777? Thanks Stefan My system Master: Intel i7 CPU X980 4GHz ;12GB RAM; CSX SSD 1200 240GB x GeForce GTX Titan 372.70 2 screens 1920x1080 Sound Creative Sound Blaster SB X_Fi driver 6.0.…

Hi Guyshis then When asking the FO to start the engines, with the start sequence being 2 then 1, he says ' starting engine 2' then immediately says 'engine cutout '. the engine starts but when I ask for engine 1 to start, the FO has already put the packs back on and there is not enough air pressure to start this engine. Have I got my settings wrong or can anybody shed some light on the problem

Hi Bryan, Just a small nag. I searched the forum but didn't see anyone else with this issue. Sometimes I run a bit behind on my preflight to the point that the loadsheet arrives during the departure brief. This in itself is not an issue, but what's happening is that the FO breaks into the brief with "here's the loadsheet." Then, when the brief ends, the acars printer sound is played. I imagine the intention was for the printer sound to play during the brief and the FO's statement to come after. Would that be a correct assumption? And while I'm here, I might as well put in two requests for a future update. First, I've noticed the flight attendant begins an announ…

Hello the voice control on my P3D Version is not working. I have the latest version of Reboot and PMDG the button control is working. I already did the speech Recognation settings also the training and set the FMC like the manual. But if i speak the FO ignore me^^ I also checked the Audio Settings. Other people can hear me nice on TS3 or something else just the Addon not. I saw on YouTube where people speaking "PREFLIGHT CHECKLIST" and after that it flashing a green screen with this command i didnt't have this. I also deinstalled Audio drivers already but still not working :( Hope you guys can help to figure it out.

Good evening, I purchased old FS2Crew for NGX (FSX) (Actually version 2.3). Is there any discount for upgrading to Reboot version? Does old version 2.3 work with P3D? Which is the last version for FSX after old 2.3? Thanks very much,

Hi, every time when I do the before start checklist the FO voice cutoff. The Fo is doing all things well but after that point but I hear no voice. The only way to resolve this is to end FSX and reastart it. But when I do the next flight the same happens again. Any idea? Greetings and thank u.

Can the 737 reboot be started at taxie or before takeoff or does it need to start at the beginning?

Hello! My friend just bought FS2Crew for NGX (rebooted) and installed with button control. Everything looks ok, UAC disabled, status info - all ok, it is enabled in configurator and so on. Problem is - the panel itself is not visible, just a white square around it. I tried to disable/enable it again, but that did not help. Only way to make it visible is to locate it on screen un Undock Window. However It looks like it has same problem with secondary panel. As soon as i "dock" the window back, it becomes invisible again. This is on P3D latest version. I did not find anything related in the manual.

I originally purchased my FS2crew from Aerosoft. They still only have V3.0 available to download? How can I download 3.1?

I have the last versions of product. When I say "set dome light on" the FO turn on the lights on the cockpit. But, when I say "set dome light off" the FO responds but don't turn off the lights

I am a long time FS2 subscriber and have most ALL the products, however, I am less than happy with whatever changes came with the update to V3.0 and global. I installed them both, separately several times and I continue to have blank/black gauges and FS2 does not even show up in my addons menu in FSX. In inspecting the panel.cfg it is NOT installing or writing the [Window 21 and 22] which are FS2Crew main and secondary Panels, I expect that these should contain the gauges, etc. I have wasted an entire morning trying to fix the issue to no avail. I have uninstalled and reinstalled completely and still just black gauges. This should not happen. it is quit…

Hi Bryan..In the pmdg 737ngx..fs2crew not showing up in instruments in the menu bar? xml issue? or no. No reference to Fs2Crew in prog data or app data. Running p3dv3.2xxx windows 10x64 Thanks, Bob M.

i had the FScrew for old i uninstalled . Now i bought the new for 737 PMDG onewhen installing appearsthe next msg: "The old legacy version of Fscrew NGX was detected on your pmdg NGX panel.cfg file. Please re-install the PMDG737........." I do not understand i uninstalledthis version first....help me

Hi guys, After the last update for NGX Reboot I have a problem with the NGX. When running the landing checklist and come to speedbrakes I say "Armed", but FS2Crew hears it as "Arm". I have tried to put more pressure on the "D", but it still come up with "arm". Best regards Peter Lund

Hi folks, I've a weird issue caused by Reboot in P3D v3.3 HF2 using voice commands. Everything works perfectly fine throughout the entire flight. But when I vacate the runway after landing and order "ok to clean up" either by voice or using the speedbrake trigger P3D crashes with a fatal error. The event monitor states as failed module the api.dll. The sim has been installed freshly yesterday together with the NGX and Reboot. Any ideas or hints how to solve that issue? As this is the only issue up to now it realy annoys me...

Any help with this would be appreciated. I have now reinstalled both Fs2crew rebooted (button control) and the NGX twice, with still no resolution to the issue. Both the primary and secondary buttons I have assigned correctly through the P3D control panel are working, as they can be seen being assigned in the P3d control panel, but nothing is happening in FS2Crew. I can assign buttons on the keyboard, that work in FS2Crew, but not through the yoke, even though it is showing in P3D. I'm sure there is a simple explanation, as I have had this working successfully both in FSX and FSX-SE previously. Help appreciated, cheers. Here is the Fs2crew entry in the panel cfg from the…

Evening all, I've recently purchased FS2Crew reboot for the 737 but I can't get it to work. I am trying to active button control (I have no headset right now) when I try and re-map the buttons in p3d for the alternate static nothing happens. I have a free version of FSUIPC which I have since deleted because I thought this might have been the problem. I've uploaded a video to show you all what I mean!! Anyone got any fixes? The last thing I want to do is delete P3D and re install. Thanks in advance for any help or advice!!!

Hi, I'm using SOP2/Button. Providing the option "FO Controls IRS = Yes", what time does the FO turns it to NAV? The question is because I like to input the FMC with departure data before the FO comes back from the walkaround, so I have to do it because he leaves it off when going out to inspect. I remember, sometime ago, that the FO actually turned IRS to NAV, but it happened only once or twice. Best,

When I try to install the ngx rebooot v 3.1 I was told to uninstall my EmergencyPack with all the different FO Voices. Why. I payed a lot of Money for it and now I can throw it in the trush? Please tell me how to instzall the reboot update v 3.1. Thank you very much.

Hi purchased and Installed reboot a few weeks ago from Just Flight. Last night I thought I would give it a try. I have win 8 so went into my apps screen and found all the fs2 crew apps including the fs2 crew configurator which I ran. It opened up and a message came up saying an update was available so I went to my Just Flight account and re downloaded the install package. I ran the file and did notice on the screen that it said version 3.1. I pressed version P3D v3 and noticed it was going to install it in my P3D folder. here is the problem, after the installation I noticed it didn't show anything to do with the direct x files like it did with the original installation…

Hello, so this happens sometimes both on the 737 NGX REBOOT and on the 777. very short said, i run the FO on my headeast (which works fine) and the rest on the speakers (which works fine). the problem here is that after some time i seem to loose the sound from FS2CREW copleatly. one example which i have had is starght after push and engine start when i command TO flap he does not reply, and thereafter whatever i do he is silent, i can ask him to put a speed in the MCP, he does put it in but never replies. if i try the Audio test i can not hear anything. this happens sometimes both on my 737 reboot and on the 777. although on the 777 i fix it my reseting the audio system, …

Hi, I've just purchased and installed FS2Crew and following the instructions in the tutorial I'm not able to change the interface to 'Voice Control' When I attempt to make this change the following is displayed in RED 'Interface Voice Control Lock' Please advise and thank you. Robert

Hi Brian, 1. I use P3D V3.4 with FS2Crew Reboot 3.0 When i make the Update to Version 3.1 must i uninstall the NGX. At this time my FS2Crew Version Reboot 3.0 working very good without Problems. I will not reinstall my NGX 2. Is it better to make a new Installation or is the update the same Greatings from EDDM Frank

I had reboot and the 777 version working perfect a year ago. I deleted P3D and everything to go with it. To do a complete reinstall of sim(p3D 3.4) Done a complete fresh install and both Reboot and the 777 version do not work. The 777 after install comes up OK and i press voice, the voice light comes one and nothing happens. If i try to repress the voice button it crashes P3D. After a reboot of p3d it says I have a SDK error. After reading the SDK error page/guild, there is nothing in there i have not set up right. Like i Said the last time I used FS2crew a year ago everything was fine, last time i used sim also Reboot 3.1 I DL v3 and installed, did …

Hi All Cannot get this to run at all. All other Fs2crew programs work OK. Any ideas Thanks Clive