FS2CREW: PMDG 737 NGX REBOOT

The Autofeather remap key doesnt work and the panel is black when i select it i reinstalled and made sure my UAC and my firewall was off so... idk whats goin on HELP!!!

Hello Guys, since this seems to be a very proficient community i hope you can help me with my problem! 🙂 I recently installed the reboot version for PMDG´s NGX for p3d 4(.3). As far as i know i did everything correctly but i don´t seem to get the fs2crew main window. When i hit "n" ( for autofeather arm; tried other keys also) i seem to get what i would discribe as a short flashing box in the upper left corner of the screen that seems to be the main window (judging by the outlines) but it´s gone almost immediately. I have tried different solutions: -reinstalling both products (ngx and fs2crew) -binding the autofeather to different keys -running is…

I noticed tonight when coming to TOD I did not hear the cabin crew announce that we were descending. However at 8000ft she came on the PA and announced that we were starting our descent. Is there anyway to change this so that at TOD she makes the announcement rather than halfway through the descent.

Hello Bryan, in the next update is it possible to implement an option in config so that the F/O does not set Vref in the FMC during the descent procedure ? (like in the 747). Stephane

I have recently bought a new pc from Jetline Systems. Im running Windows 10 and have added a small LED tv as a second monitor where I run my Navigraph charts and keep my flight plan and etc during the flight. I was having some difficulty with the audio system freezing up during flights and could resolve it with resetting the audio in the secondary panel. I believe that I have narrowed it down to it occurring when I go over to my second screen to change charts etc and then when I come back the audio is frozen. Any ideas on how to fix this or is it a setup problem just on my pc? Thanks

Not sure If I missed clicking on something but how do I make the bell turn on when the jetway is moving. My jet way just moves with no bell.

Don't know if it is me.....occasionally the pre flight procedure seems slow. Today's 25 minute pre flight took an hour. Anyone else notice this or is it just my imagination?

What’s up guys quick question is there a way to save the panel state? meaning every time I start FS2crew I have to go and change it from button to voice and then change it from SOP2 to SOP1 is there a way to have it where when I start FS2crew it’s already set to voice and already set to SOP one?

I just installed the fs2crew 737 ngx for prepared3d V4 after installation it puts a shortcut on my desktop (P3D V4 Reboot NGX Config Manager) when I double click the shortcut it tells me " The app on your Pc needs the following windows feature .Net Framework 3.5(includes 2.0 and 3.0) so I click install this feature. Then it tell me to restart my computer and I do. Once my computer restarts I click the shortcut again to configure and once again it tells me the same thing. Its an endless loop. I have yet to use the program because of this.

Hi Bryan, I'm using the latest version for P3D v4. 1. The scandinavian FO states "Engine Anti-Ice coming on", even if I say "engine Anti-ice off". The green bar says "Engine Anti-Ice off", and the FO indeed turns the engine anti ice back to off. 2. When passing 4000-5000 feet, the FO first asks "you want to release the cabin crew now?". I reply Yes, and he states "checked". I also see on the green bar that "Yes" is showing up. However, when passing 10000 feet, he asks "you want to release the cabin crew now"? Why the same twice? Best regards Kyrre Andersen

When I run the map on the program it just crashes. Description: Stopped working Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: fs2crew_ngx_reboot_configurator Problem Signature 02: 1.0.0.0 Problem Signature 03: 596a3718 Problem Signature 04: System Problem Signature 05: 2.0.0.0 Problem Signature 06: 59924cd1 Problem Signature 07: 1fbf Problem Signature 08: 29 Problem Signature 09: System.Net.WebException OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&c…

I'm user of crosshair vi hero and yesterday i format my computer. Installed simulator back but i had problem with fs2crew. Speech recognition was working nicely in control panel, trained my voice for hours but however i try in simulator fs2crew doesn't hear my voice. I've checked a lot of issues but didn't find any solution. I've tried to unistall 6.0.1.8339 version of realtek driver and tried fs2crew again and it's working. Maybe there is easy solution like check or uncheck box but i don't know. I write here because i've spent my whole day about it and don't want other people waste time about it.

I am using the button setup for FS2crew and on almost every flight thus far, the FO keeps lowering the landing gear during climb. Not sure what is causing this.

Hi, I have about 5 different models and liveries of the PMDG 737NGX. When I checked all the panel.cfg for each aircraft there was only one with the FS2Crew entries in it. Do those entries have to be in each aircraft's panel.cfg file that I fly? Thanks Joe

Hi, A week ago I updated P3D from 4.1 to 4.2, all went well until I tried to fly with FS2Crew (Reboot) on mij PMDG 737 NGX (64 bit). The main FS2crew panel is blanc, empty. I de-installed FS2Crew and PMDG 737, Reinstalled step by step PMDG 737 NGX tested it, closed the P3D 4.2. Installed FS2CRew Reboot, started P3D en the problem appears to be solved. The menu was back, nice black instead transparent. Until I rebooted the PC, so now the issue is back.. System check is ok. DLL might be the problem. I'm sure I have installed the 64 Bit version, downloaded the latest installer from the Website. I would appreciate a solution. Kind regards Eric

Hi (Disregard it was an outdated Make Runways download in the FS2CREW Documentation) Makerunways 4.60 fails s below when I try to run it from Lockheed martin root folder just does not process anything and have set as administrator Failed to Make Runways CSV Files Failed to make FStar RC RWS File Total airports=0, runways=0 Thanks Wayne

Why do I keep getting the 10k descent procedure at 15,000 feet?

Hello Bryan, Cannot open main panel . check everithing seems ok but cant load up main panel vi akeyboard. 1. System check everithing is ok. 2. panel cfg, has lines window20=FS2Crew Main Panel window21=FS2Crew Secondary Panel [Window20] size_mm=1069, 51 window_size= 0.5567, 0.0425 window_pos=0.00,0.05 visible=0 ident=1000 zorder=100 sizeable=1 gauge00=FS2CrewNGXRB!FS2Crew_MainPanel, 0,0,1069,51 gauge01=FS2CrewNGXRB!FS2Crew_Audio, 20,20,5,5 gauge02=FS2CrewNGXRB!FS2Crew_VoiceMain, 10,10,5,5 [Window21] size_mm=402, 639 window_size= 0.2093, 0.5325 position=3 visible=0 ident=1001 zorder=105 sizeable=1 gaug…

I have run into a problem. I have my PMDG 737 and 777 products bought, but my account was compromised on a separate purchase and after going back and forth, they locked my account and cancelled all my orders therefore I am unable to update to sp1d or later. I had it previously up to date before so I had no problems but I just to had to do a fresh uninstall/reinstall of fsx so I no longer have access to the service updates. I sent a support request to PMDG but I am sure they either won't respond or just tell me that my account is locked because of that compromise. Is there anything that can be done or is the software unusable now?

Is there a fix out there to get Fs2Crew 3.1 to work in Prepard3d V4.2?? I install, but after setup following the manual and pressing "N", nothing comes up. I did assign the the keys correctly for P3d for the PMDG 737. Is there a dll entry missing or something? Any help would be appreciated.

Hi everyone, I'm using P3D v4.1 and FS2Crew (version 3.1) for the 737NGX and I noted that the time in the main panel go wrong. Usually starting from the long state it takes 25 minutes (and it actually display +25) but if I time it with a chronometer it will be longer than 25 minute, approximately +40 (a minute displayed is approximately 85 real seconds). I have also checked the time in the simulator it's right and on normal speed. I tried to reboot and reinstall but unfortunately it's the same! I hope you understood my problem fixing that because this is a awesome product for the 737, also really helpful for the pilot. Regards Andrea Casolari

Hi guys, I need your help with this. When I start a flight, everything looks good and normal. But for example: I call for descent checklist and I want to cancel the checklist so I use: "cancel the checklist". At that time, FS2crew sound stop working. I can't recall for descent checklist again by using "Descent checklist" "resume the checklist" and so on. Then, if I use the arrows to change cycle the error continues. I can see the green bar recognizing what I say, but no aural response of the F/O. The F/O do the checks, and move the switches, but no voice is heard. The problem is scratching my head and I don't know how to solve it. I TRIED EVERYTH…

Just about to the get the above (am using P3Dv4) and noticed the best way to use FS2Crew seems to be with a mic............. Currently using my 737 pdmg with a 5.1 surround speaker system - just wondering what mic people would recommended and can I continue to use the speakers with some kind of mic or do I need to use it only with a headphones/mic? Also in terms of FS2Crew (never used the product before) so is it possible to use it for just different parts of the flight (for example take off and landings) or does it need to be always on and if you miss steps in the check lists (for example) does it still work or do you need to follow the steps all fairly pr…

Having read other links regarding flap problems, I have to conclude that my symptoms don't quite match those of other people. For the first time, I used the Cold Weather procedure SOP2, and everything went according to plan. I was able to ask for Flaps 5 before arriving at the runway and running the Before Takeoff Checklist. However, on my next flight on the same route, I just asked for Flap 5, which was set, then the FO announced he was doing the check for free movement, and cycled the flaps to 40 and back to zero. No amount of shouting at him would persuade him to set flaps 5. For FS2Crew, I have my Flaps lever on my quadrant disabled. During the "OKAY to CL…

Is it my imagination or have I got a bugged voice pack, but when passenger load one of them says "for F sake that's all I F ing need" I sure that's not right.