FS2CREW: PMDG 737 NGX REBOOT Latest Topics

Reinstall FS2Crew for FSX - 737NGX

Sun, 23 Jun 2024 18:36:23 +0000

I had to install FS2Crew from new for my 737NGX I have all the released products purchased I am desperate because I go to the fs2crew site where I am registered and my products do not appear.
Please help me, I don't know what to do, I still use FSX.
Thank you

John

FO start APU during Elect.Power.Up...

Sun, 17 Apr 2016 12:56:43 +0000

Hi all !

I just get the new Reboot version today and only one probleme (may be not !) i d'ont understand yet (all the rest is perfect !)

I just try in SOP2, but when i start the [Run Preflight Events], the FO start batt.. ect but finaly start the APU and not the GPU instead.

The option [RUN ELEC PWR UP GPU PRE CON] is OFF.

May be something i not understand !? ... or is it different than the Legacy Version ?

My english is not so good sorry..., i'm french !

Thanks à lot for for your help !

Philippe

HS Button seems ineffective

Wed, 21 Oct 2015 07:36:56 +0000

Hello everyone.

I don't seem to notice any difference when I enable or disable the HS button (NGX Reboot 1.1).

I am wondering which sounds this switch is supposed to redirect to either my headset or the primary output device?

All FS2Crew sounds seem to still go to my headset. (With the P3D background and engines sounds going to my priimary speakers as set in the p3d 'primary playback device' sound settings)

Any info would satisfy my curiosity. Thanks.

Audio Cuts out after takeoff

Thu, 20 May 2021 18:02:26 +0000

This seems to be exclusive to the 737.

I would have SOP 1 going and once we get after the after take off checklist, the audio drops completely. No PA/FO/FA. However, it still hears commands and performs most of them (exception Gear up/down).

Button control did not have this problem. I have tried to uninstall and reinstall and reinstalled my audio drivers.

FO doesn't ask to start APU

Wed, 27 Jan 2021 18:46:06 +0000

I think this may have something to do with resetting the default, but I can't see how to do that. The FO used to do the entire flow and ask to start the APU right after the "Before.... to the line", but doesn't ask anymore.

No voice on 73/74/77

Sun, 13 Dec 2020 00:15:29 +0000

I searched on the planes above for your fixes concerning no voice. I have the settings to voice and the audio selected to G933. I can use vpilot and that is ok but i dont even get the green bar with the text. I have the speech properties set to US english. I'll try the maddog also but i fear its gonna end up the same way. Frankly i feel its more on my end concerning the headset because ive reinstalled everything today. Ohh and before i forget, ill buy your stuff from simmarket since i can use the code there due to the paypal issues i have.

VR flashes when FO speaks

Sat, 14 Nov 2020 17:25:05 +0000

Since updating to 5.1 and reinstalling FS2Crew I get stutters and flashes when FO runs checklists in VR in the NGXu. I have Cosmos HMD and nvidia 2080 TI with I9 and 64 ram, overclocked to 4.9.

I tried lowering resolution and texture quality but no help. Any suggestions on possible tweak?

Error during installation

Fri, 13 Nov 2020 07:21:04 +0000

Good morning,

the installation program of FS2crew 737 PMDG NGX REBOOT report to me an error:

"Error! The PMDg 737 NGX host aircraft does not appears to be installed

Please ensure this aircraft is installed. Please contact F"sCrew for additional support"

For your information:

The installation program started as administrator
The root folder of P3DV4 as been selected correctly
The PMDG 737 NGX is already present in root folder of P3DV4 with the folder PMDG and the aircraft is corrrectly located under simobjects/airplanes

What is the problem?

sorry but I wanted to insert some images but I don't know if it's possible and how to do it

Thanks in advance

Max

CTD when calling "Light and Doors"

Sat, 26 Jan 2019 15:15:41 +0000

Hi Bryan,

I don't know if FS2Crew keeps any logs, if so, I will happy to provide them.
I only get this error when calling the "Light and Doors", so maybe you have any ideas?
Hereafter you will find the error message from the EventViewer

Faulting application name: fsx.exe, version: 10.0.61472.0, time stamp: 0x475e17d3
Faulting module name: API.DLL, version: 10.0.61472.0, time stamp: 0x475e180d
Exception code: 0xc0000005
Fault offset: 0x000175fd
Faulting process id: 0x11a4
Faulting application start time: 0x01d4b487a9810ae4
Faulting application path: C:\FlightSimX\fsx.exe
Faulting module path: C:\FlightSimX\API.DLL
Report Id: 28723394-208d-11e9-bdc0-448a5b9c68ea

Faulting application name: fsx.exe, version: 10.0.61472.0, time stamp: 0x475e17d3
Faulting module name: API.DLL, version: 10.0.61472.0, time stamp: 0x475e180d
Exception code: 0xc0000005
Fault offset: 0x000175fd
Faulting process id: 0x1288
Faulting application start time: 0x01d4b577694d175a
Faulting application path: C:\FlightSimX\fsx.exe
Faulting module path: C:\FlightSimX\API.DLL
Report Id: 20908f88-217b-11e9-b440-448a5b9c68ea

Cheers,
Luc

NGX + P3D 2.5

Wed, 17 Jun 2020 02:43:24 +0000

So, I recently came back to simming, forgive me if I am still not fluent on all the newer acronyms NGX/NGXU/Reboot/etc.

I am still on P3D v2.5, because the significant $$$ investment needed to upgrade addons and also because limited current addon compatibility on P3D v5, I am waiting for more widespread support before I digging into my wallet again.

So I am considering buying the FS2Crew cockpit crew add-on for 32-bit P3Dv2.5/NGX (assuming it will actually work? that was not clear to me by just reading the FS2Crew product page).

And the second very important question: if I do that - would I have a license upgrade path in the future to the FS2Crew version that is compatible with 64-bit NGX/P3Dv5 ?

No Voice Control

Sat, 23 May 2020 12:07:16 +0000

Hello,

i have Win 10 set to English UK, and this works fine

with UGCX Voice Control.

And now i will use PMDG 737 NGX Reboot.

But, i can not set to Voice Control. And UGCX Voice Control never works.

See Picture:

https://ibb.co/zn2C0qm

1 - English US is installed and of the first place.

2 - Voice recognition is set to English US

---------- Restart Windows -----------

3 - Win 10 set Voice recognition from English US to German again.....?

I dont see the Mistake.

Best Regards

UGCX and FSX version of FS2CREW Reboot 1.5

Fri, 27 Mar 2020 16:31:29 +0000

Hello! Does the latest version (1.5) of FS2CREW for FSX support Ultimate Ground Crew X? And I have the second question about Speech Recognition settings. Do I still need to use US English for version 1.5?

No cabin crew input in SOP1 (voice)

Sun, 23 Feb 2020 14:41:24 +0000

Hi Bryan,

I am not getting any support from cabin staff in voice or actions. It is just as though they are not aboard! I get no request to start boarding, or pre start report from the senior cabin attendant and the doors are not closed by fs2crew. Also, I do not hear a word from the FO prior to my initiation of the pre start procedures, which I am sure that I should. For instance, I seem to remember he would tell me that he was off for his pre flight walk around and later report all was well.

Once into the checklists and flight procedures communication with my FO goes as normal.

I am using the latest version of fs2crew B737NGX reboot Prepar3D v4. My fs is prepar3dv4.5. Config pages are set for airline operation (not military) and I have checked that the option for fs2crew to operate doors and air stairs is selected. All this using SOP1.

I have reinstalled fs2crew with no improvement.

Can you help?

Brian.

FS2Crew First Officer Volume

Sat, 15 Feb 2020 20:36:39 +0000

Is there a way to adjust the volume of the first officer in my headset from the center console in the PMDG 737? I did my first flight on VATSIM today while using FS2Crew - which I just got about a week ago and am loving it. FO volume was fine when learning to use the program but very low when I conntected to VATSIM and it was drowned out by the controller and other aircraft. Audio is set to 5 in the FS2C panel. Other option I think is to adjust VATSIM volume down in vPilot settings then use the headset volume control as a "master" to raise/lower all volumes, if that makes sense. But I cannot find that a knob in the PMDG will simply raise the FO's volume. Thanks.

FS2Crew And Flaps

Tue, 11 Feb 2020 16:33:56 +0000

My First Officer is working perfectly with flap settings but they move back to Flaps Up when I do a control check. I do have a saitek throttle quadrant and I leave the lever alone now that I'm using FS2Crew. Is it best to just delete the flaps axis assignment to take my saitek flaps lever completely out of the equation and only use the FO to avoid conflicts?

Flight attendant voice

Mon, 27 Jan 2020 03:09:21 +0000

Hi All

Is there any way to 'silence' the FA? I only ask as I have a separate custom file for all FA briefs in place of the FS2Crew ones.

TIA

Steve Young

Canberra

Compact Captains Flows and Checklists - Excel/PDF

Sat, 25 Jul 2015 11:34:07 +0000

Now that Avsim is back up I have uploaded my Captains only compact flows to the Library. You will see them tomorrow (If you are impatient, go to the FS2Crew Facebook page where I have a dropbox link - Once the files are up here I will remove this link).

These flows are really designed for people viewing them in Excel (or compatible spreadsheet program) because the included notes will give you all of the dialogue variations and also include important information.

Obviously you still need to read the manual and tutorials first but once that is done I think you will find these much easier to use, especially if viewing on a second screen or tablet.

Note that I have also included a spreadsheet that contains all of the Voice Control versions of FS2Crew that I own so you get 777, NGX Reboot, Q400 and Aerosoft Airbus all on one spreadsheet.

Same format as my previous versions.....only improved!

Spreadsheet contains tabs for all SOP's of Reboot (Plus I have another spreadsheet that has 777, Q400 and Airbus on the same sheet)

I have inlcuded helpful hints in the notes here:

Notes also contain all of the alternate version of dialogue

F/O Trim setting is always wrong

Mon, 09 Dec 2019 05:14:04 +0000

Why does the F/O always set the trim setting to the wrong setting?? It never matches the FMS. Its been this way for years. Sometimes its only a tille off and other times its way off?? Can this be fixed?

737NGXu Released

Fri, 08 Nov 2019 00:12:52 +0000

So, as something of a surprise, PMDG just dropped their updated NGXu base package, and while we're all off scurrying to try it out, I'm sure it won't be long before we're itching to have our virtual FO along for the trip again. I know it probably won't be just a straight port-over from the FS2Crew Reboot, and it'll probably take a while, but would I be correct in saying that most likely we'll see an FS2Crew update for this at some point?

NGX Reboot Configurator

Mon, 18 Nov 2019 22:27:07 +0000

On my FS2Crew NGX Reboot Configurator tjere is no "ENABLE FS2CREW BUTTON:" on the screen

Which SOP does Delta use?

Sun, 27 Oct 2019 01:36:03 +0000

Anyone know?

NGX voice disappearing

Tue, 12 Nov 2019 10:50:54 +0000

Good morning

It is not the first time and it is not only with the NGX but also with the B747-8

All is fine initially...I start to talk with my copilot, I am on the ground...when...suddendly...I cannot hear the copilot voice...I know he is there...If I reply I see the copilot receives...but I cannot hear his voice.

I tried a RESET AUDIO SYSTEM...nothing

I tried to change the OUTPUT...nothing.

I am sure my mic is ok (I can talk to controllers)...and the copilot is listening

The only way is to restart everything (P3D included)

Any idea?

Verdict

Mon, 11 Nov 2019 00:13:50 +0000

Bryan, any luck with the 73 Reboot, will you be able to make it work. I'll give you my money!

Wrong flap call co-pilot Fsc2crew

Fri, 08 Nov 2019 14:23:52 +0000

When I call out 'flaps 1' when taking off, the copilot first says flaps 1 and then he says 'flaps 5' and
puts the flaps in position 5! What's wrong?

Can't hear F/O

Mon, 10 Apr 2017 04:29:02 +0000

Hi,

I started a flight today and all of a sudden I couldn't hear my F/O. He would still respond to my commands and prompts by actioning the appropriate items for that checklist but I couldn't hear him.

I completed an audio test and I couldn't hear that test either.

Any solutions or ideas why his voice suddenly cut out?

Thanks.

Lucas Gozzard.