FS2CREW: PMDG 737 NGX REBOOT

So, as something of a surprise, PMDG just dropped their updated NGXu base package, and while we're all off scurrying to try it out, I'm sure it won't be long before we're itching to have our virtual FO along for the trip again. I know it probably won't be just a straight port-over from the FS2Crew Reboot, and it'll probably take a while, but would I be correct in saying that most likely we'll see an FS2Crew update for this at some point?

On my FS2Crew NGX Reboot Configurator tjere is no "ENABLE FS2CREW BUTTON:" on the screen

Anyone know?

Good morning It is not the first time and it is not only with the NGX but also with the B747-8 All is fine initially...I start to talk with my copilot, I am on the ground...when...suddendly...I cannot hear the copilot voice...I know he is there...If I reply I see the copilot receives...but I cannot hear his voice. I tried a RESET AUDIO SYSTEM...nothing I tried to change the OUTPUT...nothing. I am sure my mic is ok (I can talk to controllers)...and the copilot is listening The only way is to restart everything (P3D included) Any idea?

Bryan, any luck with the 73 Reboot, will you be able to make it work. I'll give you my money!

When I call out 'flaps 1' when taking off, the copilot first says flaps 1 and then he says 'flaps 5' and puts the flaps in position 5! What's wrong?

Hi, I started a flight today and all of a sudden I couldn't hear my F/O. He would still respond to my commands and prompts by actioning the appropriate items for that checklist but I couldn't hear him. I completed an audio test and I couldn't hear that test either. Any solutions or ideas why his voice suddenly cut out? Thanks. Lucas Gozzard.

Hi there, I've got a small problem with my FO who is going to get sacked if she continuous acting like that. LOL During startup she starts the engine and says straight after that Starter cutout and then oil pressure, then engine 2 stable even thought startup is still in progress.this only happened in the last 2 flights. Any idea why this now starts to happen? It has always worked perfectly. Regards Leo de Haan Scotland

Started FS2crew this morning and got the voice that says an important update is available, So I redownloaded my fsxcrew ngx reboot, astarted the flight again, go the same message. WIN7 64 with Boxed fsx version. Something I'm missing?

Hello guys, I'm having a lot of problems finishing the SOP3. FS2C doesn't recognize APU ON THE BUSSES, CABIN CREW DISARM SLIDES AND OPEN DOORS and SHUTDOWN CHECKLIST. Any suggestion of what I could do to make it work? I already trained the voice recognition more than 10 times, and added a lot of words to the dictionary. Thanks!

Captains, I've updated FS2Crew: PMDG 737 NGX Reboot for P3D V4 to integrate with UGCX at a higher level. The 737 is the first on the list of many FS2Crew products to be updated. If you own FS2Crew NGX Reboot for P3D v4 and you want to help test the update for it, please send me a support ticket via: www.fs2crew.com Cheers,

Hello, All the application work well for me. No problems. Only a rookie question, or two (I run Fs2crew for the 737 P3DV4, and use SOP 2), and is my first product from FS2Crew. (a) "After DESCENT CHECKLIST in the main Panel on the right MD flash every second (approximately) and I don´t know why" ¿Any help? (b) Also, How to make "Recall" on the 737?. I know how to make these on the Airbus, but not on the 737 Tank You, Emilio Casalduero

Hello, JUst installed the reboot FSCREW and I can't change the SOP when I click on it it doesn't change. Did I miss something ? Somebody can help me ? Thx

Hello, i can not change in the config from Button to Voice Control. This choice is not available. System: FS2Crew P3DV4 64Bit Captain´s Set for PMDG 737 NGX PMDG 737 NGX + Operation Center newest Version (Box Version - Conrad Elektronik) Prepar3DV4 Newest version Sennheiser USB Headset - Full Functionally tested Win 10 64 Bit i7-6700k / MSI 1070 Aero /Asus Z170 Mainboard I Have try to install the Service pack SP1C/ with Error: "The Setup has detected that no Version of PMDG 737 8900 NGX is installed. This Update requires that a previous Version of the application be installed." The Service pac…

Hi I bought the FS2Crew NGX Reboot today for P3D V4 and managed to install it without any issues. While I'm trying to enter my name and order number into the config manager however I'm met with a CTD each time I try to click any of the boxes to fill in my information. I have already tried to disable my anti virus & change some UAC settings but those didn't seem to help. I reinstalled & re-registered my PMDG 737 NGX which worked without any issues and I've also tried to Un/Reinstall the FS2Crew Installer a couple of times. Both P3D and the FS2Crew Config Manager are being ran as Administrator too which leaves me no other option than to cont…

Hi, am I right in thinking that I cannot use Fs2 crew from a saved scenario? I have my panel saved on various monitors and this would mean I’d have to move them every time I want to use the aircraft? thanks for any help

Recently the button assignments for 2Crew were deleted in FSX. Every time that i reassigned the buttons according to the manual the assignments work for the current flight. When I do a new flight the assignments are deleted. For some reason FSX will not save the button assignments.

Found it today after 2hrs of work: Check that in the windows privacy settings the: allow apps to access your phone is not off! Funny thing is that discord, self listening etc. works when it's off so don't get fooled.

Hello, Not a huge issue, but something I've noticed. Every time I get to my cruising level and announce maintaining flight level XXX, it is always 100 feet off. For example, if I'm cruising at FL360 and make the announcements, the captain reads it as "maintaining flight level 359." Again, it's not a huge issue but it would be nice if the cruising level was rounded up to the nearest hundredth. I am using button control/SOP 2.

Hey, just a query relating to using the speech dictionary to improve accuracy, i've started with this thread; I have the same issues as a brit, I go into the speech dictionary, I add the word, but it won't allow me to record a punctuation, do I need to fix this, or is recording the punctuation not required? Because just adding the word doesn't seem to help. Gives me an error basically saying nothing was recorded despite I spoke, and if you look at the recording screen it shows it's detecting audio.

I have installed NGX reboot several times in the past and have always struggled with getting the gauges to work correctly other than 'black' background when opening any panel. I did get them to work but I cannot recall what I had to do to get them to work. I have made sure antivirus software was not blocking the gauge or configurator app. Antivirus turned off during installation made sure that windows firewall was not blocking the gauge or configurator app Made sure that FS2Crew was installed to my P3D v4.5 drive and folder. made sure that the NGX panel has the FS2 window entries window21=FS2Crew Main Panel window22=FS2C…

OK, so I'm trying to follow the emergency tutorials to practice my engine emergencies, but the FO is acting strangely and not according to what's written in the doc. I have a video of a V1 reject to demonstrate the issue: (sorry for the quiet mic) As you can see, all is well for the initial roll, "80 knots" call, the emergency annunciation, and the reject and stop. Then things start to go off the rails. First, as I move through the flow and checklist, the FO starts saying "checked" a lot even though the mic isn't picking up anything. Second, he just gives up on the checklist after "Thrust lever - confirm, close". He never says anything about the s…

Hello, So yesterday i booted up my simulator and FS2C no problem. Today when i did the same thing, When i open FS2C. No good. What happens? The panels opens for about a second, then disappears. But everything still works. It hears my voice, i can do checklists with the FO, i can even press the mute button on the panel if i know where on the screen it should be visible. But i can't see the panel, and i can't open it with pressing the Assigned button for Auto Feather = N. Nor can i open it via the top menu. Because i need to start the pre-flight events. What i have done/Tried I googled and tried a lot of stuff. The last attempt…

I have tried every possible way to reinstall fs2crew for PMDG 737 program will not recognize that I have the airplane installed.

Hi Everyone, I have just bought the NGX Reboot version from the FS2crew website after successfully running the 2010 version for 7 Years. When I launch the FSX NGX Reboot config manager I get a completely white screen that does not crash, gives any error message. Just hangs no response. Bryan has been very helpful so far but no luck. I have disabled Microsoft Defender I have no other Anti-Virus, no Riva Tuner or Similar, FIrewall OFF, Everything is being run as administrator, UAC disabled. Has anyone had any similar experience? I am really trying to avoid a fresh install situation as I have to prepare for a type rating coming weeks an doing a fresh instal…