FS2CREW: PMDG 737 NGX REBOOT

Hi, I'm looking for the best procedure to migrate from the first version of FS2crew NGX to the NGX Reboot that I just bought (using the last version of the 737 NGX v1.20.8443) . I suppose I need to uninstall the previous version of FS2crew 737, but is there something else to delete, or to do, before installing the NGX Reboot version ? Thanks Pierre Boileau

Hi, ALL: What's going on with my PC? P3D no any response when I change to button mode in config menu.

Hello, I just bought the NGX Reboot for P3D V4 (Order #73185) , and I cannot get the button panel to open. -I have it enabled in the config manager -Double checked to see if it was in my panel.cfg (it is) -Set the key command in V4 (Alternate Static Source to button C) I've tried other keys.. can't get it to open. Does anyone have any advice or help for me? I am using P3D V4 and Windows 10 Thanks

I'm running the latest version of the NGX, and P3dv4 and my first officer is still not able to manipulate the cockpit in any fashion. He is able to respond to commands, but does nothing after receiving a command.

I installed FS2Crew: PMDG 737 NGX Reboot (manager v. 1.101). I pressed the button "enable". After that, if I'm trying to create a scenary with a PMDG Boeing 737, Prepar3Dv3 crushes. "The work of the program is stopped, the windows looks for ways to solve the problem". Windows 10 x64 (ver. 1703, os 15063.608). Intel(R) Core(TM) i5-2500 CPU @ 3.30 GHz, 8Gb RAM. I tried to reinstall pmdg and FS2Crew: PMDG 737 NGX Reboot as recommended in the neighboring topics, but it did not help.

Fs2crew config manager map doesn't load. Just get a script error. Any help with this please?

Hi, had to reinstall Windows and thus also P3DV4. I installed FS2CREW P3DV4 NGX Reboot but I have a problem with the Config Manager. As soon as I open it and click in any of the fields to enter information (e.g. First Name) I get the message that the config manager has stopped working. In event viewer I have the following entry pasted below. I have tried reinstalling .NET 3.5 SP1, running the config manager as administrator, in various compatibility modes, a .NET repair tool, but none of it helped. Any advise please ? OS is Windows 10 Pro, Creators Update Thanks Fault bucket 129556216548, type 5 Event Name: CLR20r3 …

Hey all, I recently installed the FS2Crew Voice Button on PMDG 737NGX, i pluged in my headset, but for some reason, i can't hear the FO's and Ground Crew's voice as they speak, but when i unplug my headset (using PC's speaker), i can hear them as they speak. Some advice maybe? Regards, Nico

I notice that there is no setup in the config for the 737 for the FO to operate the lights. However there is one in the 747. Is it possible to correct this in the next update? Geoff Thomson

Hello everyone! I have a problem when I want to activate fs2crew. When I give fs2crew to activate a message says that it can not access the panel.cfg file. I started everything as an administrator. What I do? Link to an photo of the error: https://mega.nz/#!54YmzQjK!rc0LNlkF-pk6_HpUYIxl-wjcQDZD2KvIl2z6qzmt6nE

G'day All Apologies if this has been addressed beforehand but I can't find any reference to it anywhere. I recently bit the bullet and purchased a new PC with all the bells and whistles (Win 10, P3D, etc). Long story short, NGX Reboot loaded ok but can't get voice to work. Have done the following: - Installed and updated English - US to Speech Recognition - Used the same F2C settings from my NGX FS2Crew FSX-SE - FS2Crew is enabled and System Check OK - Did the Voice Training - Microphone tested ok (incl latest driver check for headset - Corsair H2100) -- Have Voice Control & SOP set 1 activated I have spent the best part of two …

-----FIXED! DO NOT ANSWER, IT HAS BEEN RESOLVED----- Hi guys, for some reason, I cannot change from button control to voice control. I assume this is why I can't change the SOP either Windows 10 speech settings: https://www.dropbox.com/s/smzhdkt3klc5vmi/Speech settings.PNG?dl=0 FS2CREW CFG Window https://www.dropbox.com/s/bsn1p3dn5psls3z/CFG Page.PNG?dl=0 Green bar when trying t change control type: https://www.dropbox.com/s/3y1jg8pt1knvw28/Green speech bar.PNG?dl=0

I realise that you have it available on the fs2crew.com site but I would prefer to purchase from my fav. vendor. I've noticed on your site that there are 2 versions, one of them is the (P3D 64bit) version. But the vendor I wish to purchase does not have this in the product title, but in the compatibility it has listed FSX, FSX-SE, Prepar3D v2+ as the compatible sims. It says P3D v2 +... does this mean it will work with v4? Here is the page. http://www.flightsimstore.com/product_info.php?manufacturers_id=18&products_id=3881

I've been just recently upgraded v4 and this 64bit is just what I needed. I want to go for 777 or 747 later on, but for now, I will get used with ngx first.

hello p3dv4 fo not fıxıng landıng lights passıng 10000 ft whıle descend or climb usıng sop2

Hi, Working with FS2Crew PMDG 737 Reboot for P3Dv4 i have a few remarks / questions. I use button control SOP 2. I startup in a saved situation with everything set for push back and start engines. That is also the moment that i start FS2Crew and let it run as from the preflight checklist. I run the Departure brief and everything after that (taxi checklist, before start to the line, before start below the line, etc and also the approach brief, completely filled in) Remark / Question 1: When i commence taxi, the taxi-lights are not set by the FO. (i had to do that myself) Remark / Question 2: After running the before TO procedure the Taxi-…

I flew the first leg uneventfully using FS2Crew. PMDG B737-700WL. Pushed back and started engines for the second leg. Once I applied power to taxi, the ground speed on the ND started climbing, but the aircraft wasn't actually moving visually in sim, both internally in the VC or externally. I saved the flight, and shut down the sim, but the sim crashed upon closing and I got this message. Problem signature: Problem Event Name: BEX64 Application Name: Prepar3D.exe Application Version: 4.0.28.21686 Application Timestamp: 594a7255 Fault Module Name: FS2CrewNGXRB.gau_unloaded Fault Module Version: 0.0.0.0 Fault Modu…

Hi byork, ho un problema riguardo al riavvio della voce. Io uso il controllo dei pulsanti ma vorrei passare una voce ti chiedo il piacere di aiutarti non posso impostare il riconoscimento vocale Dimmi che l'inguinale non è supportato Ho già scaricato un paio inglese regno unito. Chiedo se puoi entrare remotamente il mio pc via skype grazie :)

Today only I've started having issues with Fs2 crew 737 reboot in P3d v4 where the sequence is out of order. For example, when speaking 'set standard' @10000 ft, the FO will say standard set, passing 035...now" An altitude nowhere near 10,000ft (for example) Usually he will say "...passing FL10,500...now" Then climbing through around FL300 he will initiate the 'passing transition level'??? Something that should be done on descent when passing below 10,000ft. I got the 'cabin is secure' at FL280 on descent then I got a random '1000 level' when my altitude was set at 9000 and I was at FL260 I've been using Fs2crew for many years and for about 2 weeks in P3d…

Hi Brian and all, I purchased and installed the FS2Crew NGX Reboot today for P3Dv4 along with the 777. Both installers run as administrator and P3Dv4 also run as administrator, with the 777 working as advertised. The NGX will accept voice commands and respond, however the FO will not actually action any items (neither physically or any sounds of levers/switches moving). The log within the manager confirms that the commands have been received. I have the latest version of P3Dv4 and have attempted to repair the installation of both the NGX and FS2Crew. I have also tried completely removing and reinstalling FS2Crew. I have also confirmed that SDK broadcast setting …

Hello, No such calls in P3Dv4 despite the fact I had zero issues in V3. The routine, as I presume, hasn't changed much. Help would be much appreciated. Dmitriy

Hi, I'm having issue completing <Landing Checklist> voice control. For some reason FO gets stuck at Speed brake.... I reply "armed" and I can see the correct word on the green bar, however FO only replies "check" no matter how many times I've tried. The only way out is to reply "set and check". I can confirm the speed brake is in "armed" position. I've tried putting it back to OFF and then back to armed, but no change in FO behavior. Am I doing something wrong here or this is an issue? I recall this was not a problem with SOP1, but recently I only use SOP2 and happens every time. Thanks

Hello all, ok so I bought the v4 737 ngx fs2crew my co-pilot seems not to put the lights on for taxi as he did in previous versions is this normal or have i broke something

My 2nd flight on P3DV4, same issue after take off; FO becomes stuck at Hed Sel. This is a crucial part of the take off as flaps etc., now have to be set manually and things get very busy. All else works great up to this point in this VER. Regards Darrel Zuke

I've been sat on the gate for 35 mins and the fs2crew is on +18 I can't click it like in old version to lower it but it's not counting down any ideas