FS2CREW: PMDG 737 NGX REBOOT

Hello fs2crew … I am getting the error msg "missingFS2Audio.dll" please can you advise me. Terry

I've been having trouble with the first officer not retracting the flaps fully during the clean up. It seems to stop at 15. Also noticed he's not turning off the strobes. I just started having this problem after many flights with no issues at all. Any ideas?

Hi, i have this problem, The first officer (FS2crew) is not responding on the word ''Set''. So when i say the words ''Set and checked'' it is also not responding. What can i do about it? Best regards, Marcel van den Eijkel

Just letting you know that I've updated the file on the server (737 NGX Reboot P3D V4 version only) to V3.3. It corrects a few very obscure bugs, but they're still bugs. I'll officially announce the release of 3.3 after the dusts has settled over the 747 release that supports the 747-800 model. You can download it via your FS2Crew account.

Hi Bryan, All of a sudden I'm not getting any speech audio either from the FO or the cabin crew. The cabin crew 'ping' sounds can be heard when they answer any request, but novoice. Alos, the FO will carry out any action I give him and will respond to checklist commands, but I get no verbal response from him. I have uninstalled and reinstalled FS2CREW twice now, including rebooting in safe mode to ensure that all folders in P3D folder have gone, but to no effect. I installed P3D v4.4 yesterday and until half way through a 4-hour flight today it's all been fine. Any idea what's going on here? Mike

I'm doing a series of flights in eastern Asia and using the "AS" voice set - when I call "Before Takeoff Checklist", the FO responds "Before Start Checklist". Everything proceeds properly, it just seems like perhaps the wrong audio for that response is being called.

Hi all, I don't know if this has been tackled before but I could not find anything related. Basically, fs2crew works fine with my P3dv4. I do my first flight, land and all of that, park the aircraft and deboard. Then I go for the second leg, starting the PF events. However, after some time, fs2crew just stops responding. No sound comes in reply to my commands (and I don't know if anything gets executed) and after a while, the sim freezes. I've noticed this happening after every flight, thinking that at first it was not fs2crew related, but now I am positive that this is emerging from fs2crew. Has anyone else had this problem? If so, how did you solve it? If no…

Hello Bryan, This problem has now happened twice in a row, where NGXReboot works perfectly until the descent checklist, and FO doesn't respond to the landing data. All was working fine previous to P3DV4.3 upgrade, but now I get this problem which results in a CTD. I have tried resetting audio, cancelling the checklist using "Let's start again" or "Cancel the checklist", and as a test I called for Flaps 5 and the FO responded by actioning Flaps 5, but with no vocal response. Both crashes have occured whilst clicking on the FS2Crew panel trying to resolve the problem. I've read numerous other posts on this, but none of the fixes seem to apply to me - my headset is work…

Hi Guys After many months of forced absence, I can finally using my simulator again. So I take things back where I left them at that time. Some of you will not like me but I would like to bring back the point of the famous pushback. First I would like to say that I love so much FS2CREW it brings a presence and a fantastic dimension. The fact that the "Pushback / Start Crew Dialogues" part has been removed in the Reboot version, brings a considerable hole. As the flight preparations progresses, a super cool atmosphere sets in. And then, at this very important moment of pushback, everything collapses. There is a very significant breakdown in the feeling at …

Hi, I just purchase NGX reboot and when enable the product I only get the button control. I'm running on Win 10 with English -US language. I also installed FS2crew (voice control) for Majestic DC8-400 without any problems. Is there something I missed? Best regards Svein Tore Duås Edit: Have to enable voice control in config screen inside P3D.. My mistake :-)

Hello, I have used fs 2 crew voice for a long time now but recently it stopped picking up my voice. It says “voice” in the corner of the Fs2crew display, but no green bar appears. It used to recognise my voice fine, but suddenly it doesn’t. Please help.

Hi simmers!!! The problem with my fs2crew is that when i load up my aircraft with fs2crew, it says PMDG SDK FAILED TO INITIALIZE. And shows SDK Error in the display bar. What can cause this problem? Also in the ground section, it says No Audio Link even after setting up my radio with correct setting.

Hi byork, Sorry in advance, I wasn't sure if it was better to make a new thread or revive one of the others. I believe this is the same issue has the following threads: ------------------------------------------------------------------------------------------------------------------------- I've been a user of FS2Crew for the PMDG NGX for around 4 years now (Across P3D and FSX). Due to other commitments, I haven't flown as much generally or the 737 specifically over the last six months or so. A few days ago I reactivated FS2Crew and since have had issues with sound loss then later, CTD on all NGX fl…

Good morning, I had: - P3D v3.4 - PMDG NGX - FS2Crew (without RAAS) - A2A Cherokee (plus ORBX, EZcam, ...) AND Microsoft Office Pro 32 bit (but with Access not installed) All was working fine: I mean P3D and Microsoft Office The 14, october 2018 I uninstalled P3D V3.4 and installed P3D V4, then - PMDG NGX - Fs2crew 64 bit version (without RAAS) - A2A cherokee DId not change anything in Microsoft Office. After the new P3D + addons installation , when I try to launch any Office application installed (Excel/Word, Acces is not installed) I get a Installation Error (translat…

Hello, So now with a new modern PC and P3D V4, I can finally run multiple legs. However, with the PMDG 737 and FS2Cew, it appears to be having issues. Once at-the gate and with both engines shut-down, the Shutdown checklist won't engage. Additionally, if I skip past and try to prep for another flight the Pre-Flight Events are not-able to be selected. I did try to uninstall and reinstall FS2Crew, but that had-no affect. I am going to try another flight and wait for several minutes after the shutdown to see if that has any effect. Just curious if I am missing something or if there might be a possible issue and/or conflict somewhere... V/R Kris

I need the support of this product. For reference, it is difficult to interpret because it is used as a Google translator. When I go to the main article, I use this product. If I pronounce Korean pronunciation in English, fs2crew misunderstood it. I tried recoding training but I did not understand it well and want a solution.

Hi I'm new to FS2Crew and LOVE it! There is something I would like to achieve, though : All sounds through my speakers Voice recognition via my headset So far, I have the aircraft sounds coming from the speakers. Sadly, nothing is being routed from FS2Crew to the speakers - only the headset. This is despite me selecting my speaker device in the audio config page on the SEC tool. Voice recognition and everything else about FS2Crew works perfectly. I am on Windows 10, P3D V4.3, NGX, and latest version of Reboot. I am using a Sennheiser USB headset. I only have 2 audio devices enabled in windows - my realtek onboard card, and my …

Hi all, First of all, sorry for my bad english. I bought Fs2crew reboot 1.1 four days ago, but I can't get the voice version working. The installation went well and no SDK problems at all, but the voice function is not working. I have no green bar in Pd3 V3. When I open the Fs2crew control, it shows in a green bar "FS2crew voice recognition activated" but then green bar never shows again. I have bought a new headset USB but the this didn't fix the problem, so I have installed a fresh Windows 10 Pro (English US), and then P3d V3, PMDG 737 for that version and Fs2crew 1.1 again, and the situation is the same as in my previous installation I run the 737 in the d…

Hello. For little time I m using the Australian voice to have emergencies. After using with other voices without any problem for a long time, now I can not get to recognize the word "auto" to my co-pilot. it is curious that "normal auto" takes it immediately, but "auto" no. I tried to pronounce carefully following the pronunciation of word reference (I guess English) and I think I did well ... I try to move close the microphone to the speakers to try the word reference pronunciation ... but nothing. What is the difference in pronunciation compared to the English voice? Is there a command I can give to keep it going? In the last flights I had to skip ahead by stopping the…

I apologize if this has been covered but I am not finding it. I initially set up and it was ok but now I get all sounds through my speakers. Headset I only get cockpit noise, no run up it seems and no voices. Windows 10. I also have Vpilot for vatsim installed but it worked prior with it. Windows tab for sound is checked for headset as is the FS2CREW menu config audio.

Dear all, during before start check list I ve got a problem to say "altitude". In green bar it show me something like "passing two" or "im two two". So I tried to say altitude at the beginning or during the preflight check list but in any case it cannot recognize my pronunciation. What can I do? Br, M

I don't have voice control in the config-setup of fs 2crew. When I want to switch from button to voice. I have a message in red on the config-setup: "interface button lock. Voice recognition does'nt work. I change my windows 10 in English us. I 'm from France, sorry for writing. Thanks for your answers. My product : fs 2 crew reboot 737 ngx voice and button.

I have selected my Audio device but it continues to play on speakers and not my USB Headset.. I have set it up via Configuration panel and no avail.. Reinstalled and tried everything in Windows Sound options.

Hi, I just bought FS2Crew 737 during this past summer sale. Just figuring out things everyday. I did notice that at times right after I do App Brief and set the Autobrake setting in it. The FO during the later parts of the checklists puts Autobrake to 2 and not to 3. And sometimes, when I saw flaps any setting - he doesn't move it (and yes the speeds are safe and correct to do so). Interesting quirks here. Any idea about the Autobrake? I am using SOP 1 with US1 Crew. Thanks PS - latest PMDG 737 Update, P3D 4.3

Hello: So far, I am really enjoying this product and I've still got some more exploring to do. Great work! I apologize if this has been addressed somewhere. I did skim through all of the topics in the Reboot support forum and did not see anything relevant. Whenever my checklist is interrupted (either because I didn't do something correctly prior to the checklist, or because a FA interrupted us during the checklist), FS2Crew sound completely dies (no PA, no FO, no FA, no sound tests). I have tried: Resetting audio system Changing audio device (in FS2Crew config) Combining the above two "Hold the checklist" before attempting to address the interrupt…