The Official DX10 Scenery Fixer Support Forum

I recently purchased a GTX1050ti 4gb graphics card and run triple screens using Nvidia surround. My cpu is an i5 4760ti. My question is: given the latest graphics technology (10 series nvidia) and my cpu overclocked to 4.0 using MSI Gamer, when using DX10 Fixer and DX10 which I understand utilises the gpu more, is there still a need to limit the fps to say 25-30 in order to improve texture loading, or is it better now to set FSX to unlimited? Can the new graphics card cope better? Can any techies advise, or anyone using similar cpu / gpu setup and DX10 advise their settings? Cheers, Stuart

One of the reasons I bought P3D, was because of the shadow effects I couldn't get in FSX, except by using SteveFX which as we all know transformed the cockpit shadows. But I was still craving for more, like ground shadows. However, there are FSX sceneries I have in FSX, that I still can't get for P3D, much less XP11. I'm so glad I didn't ditch FSX completely, because now I'm being drawn to restart my FSX engines with this amazing cloud shadow addon. Thanks Steve!

Hello ! I have the same issue but this time the installer want to wrtite in Public\documents\DXSceneryfixer System error was 5 Any clue to help me please ? Regards

Hi there, a few days ago, I switched to FSX SteamEdition. After reinstalling DX10SceneryFixer (DX10SceneryFixer_3_2_98, it was uninstalled first before removing FSX DVD Version) I installed the librarys without problems. But if I want to set preferences or settings in DX10SeceneryFixer i alwas get this error message: "Cannot write to dx10.ini in AppData\DX10SceneryFixer. (0) System Error was 3" I am running FSX:SE on Windows 10, logged in as normal user. DX10SF was installed and started as the FSX:SE and Steam itself as Administrator. Principally the above named path does not exist either in admins personal folder nor in users personal folder but exists i…

I have noticed that with my new 1070 gpu that I am getting black screens at certain zoom levels when in full screen only, so e.g when viewing from the tower I may get a black screen at 0.95x zoom. Zooming in or out further restores the display. This only occurs if I have the fixer option Hide Sun Glare From the Other dialog ticked. I have no recollection of this occurring with my previous Nvidia gpu and it doesn't happen on my AMD gpu on my second pc. Is anyone else seeing this and if so what driver and what Nvidia gpu do you have? Equally is anyone with a 10 series gpu and the latest driver not seeing this? thanks

On Steve's website he says ( Please ensure that FSX DX10 Preview mode performs satisfactorily on your PC before purchase. ) What is the qualifier ? In DX10 preview mode , I have a lot of black rectangles on the ground other than that the scenery looks fine. Also (some aircraft have no textures outside or in the 3D cockpit view.) Does this mean the DX10 fixer would be ok for me to purchase? I take it that the aircraft that have no textures would still not have textures even with the fixer. Thanks

HI The cloud shadows do not appear on airport custom ground planes, but I do not see it listed as a known issue? Should they be visible over custom airport ground? Graeme

After a few years of given up on FSX and no new flight sim in sight, I have reinstalled FSX and activated DX10. After just a few tweaks, I did have a smoother experience. So I did a few more tweaks, and then a few more. Yes I have a few lights issues and I have the grayed vehicles at night and the occasional blue texure flash. But nothing too disruptive that it ruins my experience. (Any ideas on how to fix these would be greatly appreciated). FSX runs surprisingly well. A few things that I have noticed that are bewildering me. I have invidia inspector set to frame limiter off and unlimited in FSX CFG but I max 30 FPS if I remove all the tweaks then my FPS reac…

Steve, When rotating the PMDG 737 around a vertical axis during a check to see if I installed the shadows correctly, I found a strange effect occurring on the Main Instrument Panel. The shadows were successfully there, but as I rotated the aircraft 360 degrees, the instrument display degraded at a particular angle to the sun such that gauges was unreadable. The light intensity was unacceptable to allow reading the instrument over an arc of about 10-20 degrees. Continuing to rotate the aircraft from that point, the gauge starts to improve to a normal display until once again degrading at the same location again. This problem only happens when engaging the Shadow optio…

Hello everybody, I would like to know if one of you encounter this strange and annoying issue in FSX/DX10 scenery fixer (latest) and the Maddog from LeonardoSH. Explanation : When you load the Maddog in the VC with night time, all FSX display flashing with strange geometrics artifacts. The VC in unusable. This horrible flickering comes immediately until the mouse cursor is displayed. Once the mouse cursor disappear this issue gone. This issue occurs only at night time. During day time everything works great. I never experienced that when I was in windows 7. I suspect the combination of DX10 Scenery fixer and may be Windows 10. Please I need your help. Today…

Hi Steve - I started using your scenery fixer a few years ago and it has worked wonders for my sim. I recently completed a new build and moved my FSX files over (but I'm having some issues) so I'd like to completely uninstall and then reinstall the scenery fixer. I just wanted to know what the best method would be to do the uninstall. Thnx Richard

hI Steve, and everyone..... The topic says it all, and the screenshot shows the problem. I have noticed that from time to time with other aircraft there is a slow draw of the cockpit interior....Before V1.3 I was flying V1.2 with my VA DC3 Airways. The new V1.3 has added night lighting of the cockpit....which was not present in the previous version...any help is appreciated. Thanks Sherm

Hi Steve I am new in dx10! Everything runs as it should so far 3 questions Is it only me but i see a lot more autogen with the fixer. A lot more trees on the ground! Performance: with vc shadows i lost about 5fps. Without cockpit shadows everything is ok. With AS16 i have some cloudpopups here and then which i never had with dx9! System I7 3700k up to 4200 Geforce 1050ti 8GB Ram AntiA 4x+4xsparseG Fsx setting moderate Inflight with pmdg about 22fps with A2A or mayestic dash stable 30fps By the way i would check out the cloud shadow mode. How is the performance? Thx Max

hallo, the new Year starts with MB-Crash. I only safe the Payment for DX10 fixer from my Creditcard. Date : 30.11.2016 Date: 28.11.2016 -25,99 EUR Text FSPRG.com STEVEFX STOR COVENTRY GB My mailadress : Xxxxxxxxxxx best regards

I grabbed the patcher and read the instructions and am having a problem. I followed the instructions step by step. I loaded library made changes to REX and enabled DX10 in the controller. When I load into flight the game just flat out crashes. Screen goes black like its going to load then crashes to desktop. Windows reports it crashed. I only have REX Essentials Plus and Aircraft installed. Its pretty clean FSX install. Thanks for any help! My Rig is Win 10 5960X 32GB DDR 4 Titan X Dell 3415W 21:9 Monitor

Hi, I'm using the latest Version of DX10 Scenery Fixer. When I will install DX10CloudShadows160 it comes to an failure. If i press OK, the Addon Menu is appearing in DX10 Scenery Fixer, but i can not see "Shade with Metars". What goes wrong? Thanks for your help.

I am slightly struggling with the water wave texture flashing as I'm crossing 1600 feet. On the climb and descend all my water will flash bright white for fraction of a second, I wonder if there is a way of fixing it . I have tried all kinds of different textures from quite small to very large from 2meg up to 10meg size and they all flash about the same so I don't think it is the size of the file. My computer is quite decent with 4770K OC 4.4 and GTX 780 TI. I realize that water is made completely different in DX10 . I understand that different level of textures is loading at that time but it gets me every time. mike

EDIT: topic should read NVidia 378.66 Hi, just updated the NVidia driver to the latest, 378.66 which then crashed FSX when opening. Cause according to appcrash was DX10fixerlib.dll. Reverted back to 378,49 and all is ok again. Menno

Hey all, I'm having problems with textures on the ground at night. During the day everything is fine but at night, especially when the taxi lights are shining on something. The runways/taxiways tend to disappear and get replaced with scrambled ground textures. I am running the DX10 fixer with the default setting and have the PMDG NGX and Flightbeam KDEN installed. Any recommendations? Thanks!

Hi there, if the metar option is ticked then the airport field and grass area is bit darker due to the cloud shadows and ok, but the runway and taxiway remains bright, please see pic 1: metar unticked and pic 2: metar ticked. (Using Cloud shadows 1.6) What can be done to dark a bit the runway and taxiways too, if the metar option is ticked? Wulf

Hi, i just reinstalled FSX. After installing Tegel X i got very strange apron lighting -> transparent sqaures around the light .... Dont know how to fix it ... also landing lights of AI Planes are extremly bright at daytime Hope you can help me. http://www.bilder-upload.eu/show.php?file=7e55e6-1488048211.jpg http://www.bilder-upload.eu/show.php?file=f53d96-1488048171.jpg

Hi Steve (if you are here), Sorry to trouble you but I cannot update DX10 Fixer because I cannot find it anywhere! On your blog you invite customers to email you "at yahoo" but I cannot find any email address on your blog. I have an order keycode but I cannot find it on Flightsim Store and your product does not seem to be listed there. If I try FastSpring it takes me to the vendor portal. The only other page I can find is your fast spring product page but that has no link to support or a re-download or update. It is just for purchasing. I have sent you a PM with my order number. I'd be grateful if you could let me have a link to version 3.2 (or latest version). Th…

Hi Steve, all. I've lost dust and smoke effects from FSX - sometime in the last few weeks. I don't usually notice it but flew a Helo today and realised it was gone - no downwash dust and no engine smoke. I then tried with my old smoky A2A Piper Cherokee - which very satisfyingly belches out plumes of grey/ black smoke - and that's gone too. I installed the latest DX10 Fixer version a few weeks ago - that's the only thing that's changed in the sim. Any ideas very gratefully received, thanks.

Got the DX10 Fixer and the Cloud Shadows add-ons, but not seeing any cloud shadows. This is with FSX-SE. I'm pretty sure I've got the settings correct for it to be displaying them, i.e. water is up on a high setting etc. It was working ok at one point, but it just doesn't want to know now for some reason. Anyone know if there is something I can try in order to get it working?

I'm having an issue with VASI/PAPI lights not being visible as I get close to certain airports. For these airports, I can see the lights in the distance, but as soon as I get close enough to actually begin using them, the lights disappear. This sounds somewhat like it could be the issue mentioned in the manual about the lights disappearing at certain angles, but Orbx airports are specifically called out as NOT needing the lightfield fix and I see the problem at several Orbx fields - for example at KTEX Telluride (where you REALLY need the visual glideslope guidance) and Sonoma KSTS. Other Orbx fields, for example Redding KRDD and Eagle KEGE are fine. I also see the is…