The Official DX10 Scenery Fixer Support Forum

Hey Steve, I was about to purchase when I saw the warning about multiple GPUs not being supported. I am not really sure what this means. I have two graphic cards in my system, two monitors on one card and a third on the other. The cards are not linked (as in SLI or Crossfire). Is this multiple GPUs, or is multiple GPU only if two graphic cards are linked to produce one output (like SLI or Crossfire)? Best, Holger

Can someone let me know when 3.1 is available on their flight sim store account. They have built the installer and just need to upload it.

Hello everyone, I've recently purchased DX10 Fixer by Steve and use the latest version (V3.0), Its been 13 days I've been Struggling for the best settingns for my PC. The only problem that I'm not aware , is it an common issue or there is a issue with my settings?, the flickering. Like when I taxi to the runway, nearby taxi ways are bright and crisp but the runway end seems like flickering. I hope you understand what I'm trying to say. If someone could suggest me the best settings for NI & DX10 Fixer. It'd really help me out. Currently I use FSX STEAM EDITION, and 8xS with 4xSGSS with 1/2 refresh rate set in Nvidia. I'm happy if I get 30 fps, and good AA. I…

Is there a way to tell what profile (by name) is currently loaded into the DX10 Fixer? This would be very useful information when developing and testing different profiles. Thx, Al

Hey pilots! I am new to this, maybe it is a dumb question... But has the dx10 fixer to run in Background of fsx? Should I start it before FSX? Or is it working after installing the library and settings? Thanks!

Version 3.1 of DX10 Scenery Fixer is now available from FastSpring for new and existing customers. It will also shortly be available to existing customers from The Flight Sim Store. If you purchased from FastSpring then the download link that you received by email when you purchased should become valid again and allow you to download the new version. If you have lost your download link then send me an email to the stevefsx email address at yahoo and I will sort it out. If you purchased from the Flight Sim Store then log onto your account there to download the updated version. Changes are Added check for FSX running before library uninstall/install. Improved sequence…

Steve, can you recommend some REX 3 or REX 4 settings espacially for the water? I don`t speek about personel preferences,but i mean the most real look. Are there settings which work best with the Fixer? I have a Nividia card. Thank you Mike

Does anyone else get this and does anyone know of a fix? Cheers

Hi guys, since i have some issues with my water i want to ask you, if it is necessary to make any settings in the Nvidia driver? I use the Fixer as long as he `s out and i make allways only the suggested settings in the NV-inspector. Here is the link to my post at ORBX because the issue still exists, espacially in the US-regions. NVI-settings from the DX10 How to from Adam,version 1.08a,Dec.2014. Any help is very appreciated. Mike http://www.orbxsystems.com/forum/topic/121787-ocean-floor-issue/ Sorry-----double post.Please delete

I've notice that in the A2A WoP3 Spitfire and Mustang that VC shadows vanish when projected on to the cover plate of the instrument panel, though they do show up on the faces of the instruments in the panel. Not a big deal, but something curious none the less. Any thoughts on what is happening here? Thanks for reading. BTW, your fixer is amazing...only reason I've held on to FSX for nearly 10 years now!

Hello I have set TEXTURE_MAX_LOAD=2048 in FSX.CFG or by the DX10 GUI, but sometimes, it goes back to 1024 ????? I have this information from the DIAGNOSTIC button, and I always check that before starting FSX. Can you fix this problem Thank you for your help ALain Maneville

Hello Steve, I bought this new plane released yesterday and noticed that all windows are showing very ugly and distracting reflections. When contacted, Lionheart indicated that this was related to DX10. Switching off DX10, the canopy becomes fully transparent (invisible). I tried to apply the Legacy reflections off but had no result. Would you have any recommendation please? (Presumably I won't be the only one looking for a solution to this). Thank you and best regards,

Hello all I have just changed my hardware an software configuration and had to installe FSX again (without problem). I have just bought DX10 Fixer and I am first of all very happy with this software (I can see lmy WOAI aircrafts). I just have a problem with a scenery called OCCITANIA VFR (I am from the south of France) and I get this message (as a windows popup) Failed to load texture : OCC_MESQUITE.DDS This is for this texture and another one. I click OK and I can carry on flying ... but it is boring. How could I fix that ? Thank you for your help and your DX10 product! Alain Maneville

And again i say thank you very much for the new version of your famous Fixer. Absolutely great work and so much appreciated. Thank you,Steve. Mike

When I'm looking straight towards the sun even covered by cockpit frame the screen is getting pale.

Yesterday I installed the latest Fixer version in my FSX:SE. When there's rain, it is depicted if I do not use AS16, but when it is used, as a "flight" starts I see drops for a fraction of a second and then they quit. Default weather only shows the rain drops, or snow again. Any ideas ?

I did not have this in DX9 so it must somehow have been impacted with DX10, perhaps someone knows how to adjust for these issues. 1. the exterior view, the glass canopy disappears only the metal bars area showing. 2. When the entire set of interior lights are adjusted, on the last click for brightness the lighting goes completely overboard bleaching bright. Any ideas on this one, or anyone else experience similar issues?

It was mentioned in the TB21 thread that a similar issue with reflections occurred with Lionheart Learjet. Bill Ortis again kindly let me have a copy and yes its exactly the same. So.. WARNING If you aren't confident copying and renaming files don't try this. The instructions are In the directory <fsx dir>\SimObjects\Airplanes\Learjet_24b\texture 1) rename the texture GlobalEnv_AC_Plexi.dds to something else e.g. xGlobalEnv_AC_Plexi.dds (If you have already done the following 2 steps for the TB21 you don't need to repeat it!) In the directory <fsx_dir>\Texture 2) create a copy of the texture GlobalEnv_AC_Chrome.dds 3) rename that copy to be calle…

I had confused this issue with the Lionheart TB21 as the thread title for the latter didn't originally mention Lionheart! It was reported to me that the sun visors do did not work in the new Just Flight TB10/20 To address this go into the debug dialog in DX10 Scenery Fixer and untick the option DX9 Style Alpha Func This will be properly addressed in the next release of the Fixer.

Hello Steve, I've been enjoying your dx10 fixer along with the new A320 and the cockpit shadows work just great! Thank you! Still I've got one question: In the shadow parts of the virtual cockpit I notice some white dots appearing from time to time within the respective area. It's no big deal - it's just as if the shadows were flashing at some tiny parts; the white dots seem to move around and then they disappear. As you can imagine it's hard to take a screenshot :wink: . These are my shadow-settings with the newest fixer version (3.0): - everything ticked except for "Enable Shadow Boost" and "Disable Volume Shadows" - Shadow Boost "0" - Contrast one notch to the r…

Hello, Not that its a huge deal but I have finally worked out most of the bugs whilst setting up my VC shadows in most of my aircraft and they work flawlessly! Except for the NGX. For some strange reason the shadows and their behavior are rather odd and unrealistic in a way. I have Ezdok (1.18) and when I am at different angles (looking down) I can see the shadows a bit more than if I were (looking up) I dont see the shadows at all, or they flicker. I have been looking on the forums for a couple of days now looking for an answer, but everyone one of them seems to hit a dead end. Again, its not a huge deal, but Im just curious to why this is. If you need any more info …

So, I am very new to the fixer. I haven't read every detail in the manual but I can't see where anything is mentioned in the manual about problems with click spots. I found several threads about "jumping mouse" and some thing about click spots. So I have the GTN stack setup for launching the GTN popup. Some planes I click on the stack but the gauge won't popup. Further, some cases where I can popup the GTN, I undock the gauge and move to my second monitor, all of a sudden the gauge goes blank, I found out if I right click in certain places the gauge will start working again, but then my mouse arrow starts flashing and jumping about and I can't click on other st…

No going back now. I knew my setup of FSX Steam Edition worked with DX10 preview, barring the usual white aircraft etc. (I have a lot of freeware, so no big deal financially if it doesn't work). Installed the Fixer painlessly. Tweaked my GFX with the Nvidia Inspector. SWEET! Left the Fixer's buttons and sliders alone for now. Had an issue with a semi transparent aeroplane flying in the dawn light, but reset it's alpha channel to white and no more x-ray vision. Running an msi nvidia GTX 960 2Gb - not overclocked so speed is just under 1200 MHz. CPU is i7 950 at 3.07 GHz. 24Gb of RAM. Windows 7 ultimate 64bit. So CPU will use the buffers as it's faster - do I have t…

Hi guys, I am using the Steve DX10 fixer. I applied AC self shadows and ground shadows, now I get this! Can someone help me please how to fix it?

Hi there, Would the light problem in the image below be a DX10 related issue? If so, is there anyway I could fix this? I use Steve's Fixer program and have the latest version installed. The problem only occurs for a short period (currently about 15 minutes) at early dusk from around 15h15 to 15h30 local time. Before 15h15 and after 15h30 the lights look normal. I did switch to DX9 and the problem went away - which is why I think it must relate to a DX10 issue? I use FSX-SE and have never seen this or any other DX10 problems before. I was flying the PMDG NGX. Thanks and regards, Rhett Kelly Order Number: FSS0274286 (SteveFX's DX10 Scenery Fix…