The Official DX10 Scenery Fixer Support Forum

Hi. My problem is that textures of moving ground equipment not drawn in DX10 mode (they're all "white"). The textures are fixed machines in right. When the mode DX9 is okay. Help to correct please.

The Airport Guys-Myrtle Beach, or TAG-Myrtle Beach Steve, this is the only 3rdP airport property where I have red squares around the beacon lights, etc. I have all lights and effects converted in this shot. Any suggestions? Latest SFDX10

Hi all I use DX10 scenery fixer (Ver.2.11) although I have set correctly both DX10 Controller andt nvidia Profile Inspector, as suggested in the manual and in DX10_ "HowTo" GUIDE, in FSX I have a bad effect of shimmering especially on aircraft textures; the problem is also evident in the startup screen of fsx of which I attach a screenshot ... something wrong? I tried various settings of antialiasing 2x, 4x, 8xCSAA ... but the result is the same ... My setup is: Windows 7 64bit ASUS PX9X79 i7 4820 to 4Ghz 16 giga RAM Geforce GTX 780 can you help me? Thanks in advance

I have been using the program with very good results in my desktop with NVidia 970 card. I was discussing with a friend who runs FSX on a laptop, with no dedicated video card but only an integrated intel chip, currently running in DX9 mode. Do you know if running DX10 preview and using the fixer will present any issues on such a system?

Good afternoon, Is normal after instalation DX10 or i have something wrong. FSX Settings-Display-Graphics no more "Preview DirectX 10" nothing there... Congratulations to Steve the DX10 is fantastic change completely fsx. Regards Luis

Hi Steve, Can this be fixed using the cloud settings in the fixer or not? I've tried every setting on or off and it doesn't seem to make a difference. https://www.youtube.com/watch?v=zDbu_15DWzc Thanks Sid

After many months trying to figure it out why is this happening with the sun glare, I decided to uninstall DX10Fixer and revert to DX9 and the issue went away. Of Course if there isn't a solution I still will keep the fixer. below is a video of the issue. Thanks

Just installed Steve's DX10 Fixer in FSX-SE. (Windows7, stand alone FSX-SE installation) So far, everything works as advertised...except. The headings (words) in the main screen pull-downs are missing. The tabs are there and fully functional, but no words. At first, the tab background was a pixilated mess, but somewhere during the flight, the tabs went almost void - all background color with only a few darker colored lines across at a 45 degree angle. Almost like the font was trying to display at a much different resolution or size (my humble guess). Oddly enough, the main on-screen menus appear and function just fine. I have made several modifications to my NVIDIA p…

Sorry. Started this in the wrong forum. http://www.avsim.com/topic/486174-a-little-problem/#entry3398069 Regards Dave.

I am a new user of your excellent product. After installing the Fixer, I made one night flight with the PMDG 737 from Stockholm Arlanda X (Aerosoft) to Zurich (FSDreamTeam LSZH X). Whilst I had absolutely no issue with the graphic rendition of both plane and sceneries, I encountered the following problems: the taxiway lights (blue and green) were not visible at LSZH (FSDreamteam) the same were flashing depending on the angle I looked at them at ESSA (Aerosoft) Is there any known remedy that I could use please? Unrelated but new after DX10, I am experiencing a bizarre phenomenon upon starting FSX, instead of opening the usual GUI to choose airplane, departure air…

Any help greatly appreciated! I've been flying FSX (specs below) on PilotEdge for almost a year now. I have been flying DX9 fullscreen with no issues. I just installed SteveFX DX10 Fixer and am trying to run in DX10 for some graphics improvements. After setting everything up I have it running great in both windowed and fullscreen mode UNTIL I connect to the PE Server. After connecting if I switch to fullscreen I get a totally black screen but it's obvious the underlying FSX is running. I can switch back to windowed using alt-enter and then everything is fine. If I just disconnect from the PE Server I can then switch to fullscreen fine. The FPS and shadows are much improv…

I wonder I I'm the only one with this problem, I had FSX/DX10 fixer and Nvidia Inspector working fine up to this driver update 364.51, everything worked like it should. But for some reason , after I updated to the newest driver 354.51 and imported my saved NV Inspector profiles like I always do, (I also have 100's of other games..I'm a BIG Gamer) and I cannot get ANY AA in FSX at all. I tried other settings, higher AA and so forth and it just does not work. So I rolled back to 362.00 and it's working again. ALSO any saved NV Ins. profile altered from the 364 driver, then saved, doesn't import back into NV Ins. after rolling back to 362. Does any of that …

Greetings! I have installed A2A's Shockwave landing and taxi lights into three addon aircraft. However, depending on viewing angle, the lights in question disappear or reappear as one's viewing angle changes, even viewing facing the VC and then panning left or right. This is especially present in viewing the aircraft from the outside and panning left or right. This phenomenon does not happen in DX9 mode, only in DX10 mode, it seems. What, if anything, can be done to remedy this? Thank you. Stew H.

Using an ASUS G750J Gaming notebook with Windows 10, DX10 fixer wants to use settings for Intel HD Graphics even though there is also GTX 870M GPU. If I run DX10 fixer it says "No AA" even if I use 'Run With NVIDIA graphics processor' by right-clicking on the application (and also I made NVIDIA the default graphics in the Nvidia Control Panel). If I change AA to 4x in the fixer application then I end up with 2 display.device entries in fsx.cfg: // This entry is controlled by FSX setting dialong [DISPLAY.Device.NVIDIA GeForce GTX 870M.0.0] Mode=1920x1080x32 Anisotropic=1 AntiAlias=1 // This is added by DX10 fixer [DISPLAY.Device.Intel(R) HD Graphics 4600.0.0] An…

I read good reviews about dx10 ie slightly improved graphics, possibly better fps and more stable than dx9. I bought DX10 Scenery Fixer and carefully followed the instructions for setting up with AMD Catalyst Control. However I find that I'm unable to fly more than 20 minutes without the scenery breaking up ie large triangles, flashing large areas of the screen etc (previously I've noticed this prior to an 'out of memory' error). I have reverted back to DX9 and flown the same route but with no problems at all. I have experienced very few memory problems with DX9. I assume that I must be doing something wrong as I can't find any other similar complaints. Can anyone point …

Hello i have o problem. after i bay and instal dx10 fixer fsxse dont work any more on dx10 mode. pleasy help Dirk (Holland)

I have just purchased Steve's fixer and have everything working well. I do have one issue now however. After I installed my Carenado 172n all the lights worked fine, I believe the lights are supposed to have native support for dx10. I closed FSX. I entered the fixer controller to change something and it asked me if I wanted to scan the effects folder and fix problems so I did that. The next time I entered FSX and used my 172 my navs and strobes all had a squarish appearance to them. All the default aircraft I switched to were fine. So I reinstalled my 172 and when the fixer controller asked me if I wanted to scan the changes I selected ignore. Now everything works fine wi…

All, Are there any specific add on programs that are known not to work? I am so tempted to purchase, but have concerns about GET and UTX. I have seen nothing mentioned either way if they will or will not work. Any first hand experience would be great. Thanks in advance.

Hi One question regarding Affinity Mask settings in FSX and Steve DX10 Fixer. If I have Affinitymask=14 because I have i5-4690K. Is it normal that when checking with DX10 Fixer, Core0 is disabled (unchecked). Will I have performance boost if this option for Core0 is enabled. Thanks

Hello; When I run the diagnostics on DX10 Fixer, i get a message saying 'BE AWARE! Non Standard scenary/world/texture/detail1.bmp- if this doesnt have mipmaps terrain will badly shimmer/look grainy' Any ideas and or solutions on what it may be? Thank you.

Hi. Out of curiosity, I wonder if DX10 fixer can fix big fuzzy lights on triple monitor setup. Lights are fine if run FSX on one monitor but across three either full screen or expanded windowed view lights are too big. I used to be able to fix it applying TripleHead2Go lights in REX 4 texture direct, but after recent FSX re-installation this trick does not work anymore. I found this advice but it does not work for some reason, may be bc I have Steam [Display] ..... //RUNWAY_LIGHTS_APPROACH_SCALAR=0.5 //RUNWAY_LIGHTS_STROBE_SCALAR=0.5 //RUNWAY_LIGHTS_SURFACE_SCALAR=0.7 RUNWAY_LIGHTS_VASI_SCALAR=0.6 Thx for looking.

Hi, VC shadows seem to be working for me but the edges are very jagged. In the default Maule, the jagged edges are not that noticeable, but in the QW757, the edges are very jagged and the shadows seem to, for lack of a better term, crawl around the vc. They appear lick splotches rather than shadows. Does anyone have any experience with VC shadows in the QW757? Or, are there any ways I can improve the appearance of the vc shadows. I am using FSX, BTW. Thanks.

Hello, Is it just me or the Navigation Display of the Triple Seven looks "very bright", while the Primary Flight Display (for example) varies conforming to the sun position. I have the VC shadows activated and working properly. I know I can adjust the brightness of the DUs via the dials, even so the ND seems to have a narrower range for this... Thanks!

Folks, I have a Intel ® HD Graphics card that came with my Gateway..I3-3220 6GB..DDR3) Hey it was on sale....:-) I forgot to check my current version of Direct X..and noticed it had a DX11... Stevex DX10 Scenery Fixer..has some real nice features..and decided to purchase... My DX11 and my current "tweaked,re-tweaked...re-re-tweaked fx.cfg..with my target of 30 FPS (Oh, i use that FX Fiber Acceleration program..gives me a little boost on FPS) Will there be any advantage to install...Stevefx DX10..Scenery fixer? Maybe try it out..for the water features?...just asking.. I know we simmers..always trying to get the best fluidity..on our game...just …

This may sound strange, but to be honest I couldn't care less about having, or not having, shadows in my FSX:SE. I want above all performance, and acceptable AA, when flying the heaviest add-ons ( pmdg 777 ) with ASN filling the skies with dense clouds and storms... The main reason I use the Fixer is because I believe I can get better performance with DX10 mode from my GPU ( 960 GT 4GB Nvidia Card ), so... - If I disable all shadows in FSX menus and in the Fixer Controller, can I expect to fetch a few more FPS ? I am getting down to 15 fps, and that's really bad compared to the 25+ I was getting as my bottom mark in P3Dv3 with the same addons ( ORBX FTX Globa…