The Official DX10 Scenery Fixer Support Forum

I am on 2.11, and when I go to the "Profiles" menu, the popup window opens waiting for me to show the folder where the Fixer profiles are stores, which I don't make the slightest idea where... I remember having used a default profile by Steve in a previous version, which I would like to use for a start - where can I find it ?

Hi, Forgive me if this has already been answered, but in looking through the forum (& not knowing what to ask the search function exactly). Does the DX10 fixer enable the aircraft paintjobs in DX10? I'm just starting out again after having years away from PC decent enough to run FSX. I was amazed at the fps increase when ticking the DX10 preview box, but disappointed when my aircraft (non-AI ) was displayed in white. Specifically freeware aircraft - Thomas Ruth's Airbus A330 and the POSKY 777 UPS (& TNT) freighter. Thanks.

Version 2.9 of DX10 Scenery Fixer is available. Note there were a few reports of it not running after install. UPDATE: The versions on FastSpring and FlightSimStore have been updated to address this If you purchased from FastSpring then the download link that you received by email when you purchased should now be valid again and allow you to download the new version. If you have lost your download link then send me an email to the yahoo email address and I will sort it out. Changes are: • Support for Dual installs of FSX and FSX:SE with DX10SF installed into both at the same time. • New Preferences Dialog • Fsx.cfg editor screen is now a menu item in DX10 Controller…

I had noticed that some of my REX 4 Texture (tropical waters) didn't seem to look right. Where I had reflections, I was getting pink/purple movement reflections. So, reapplied my Tropical Pronounced Coral textures, and fired up FSX again. Same thing. I had not messed with my settings from Steve's Fixer (latest version), so didn't think my rendering problems might be coming from there. When applying REX textures again did not fix the tropical water etc...I then on a hunch, uninstalled the DX10 Steve's Fixer library, and rebooted my system. Upon the Desktop, I installed the library, and went thought all the options, pressing APPLY as I went. The result? P…

One problem I have when running the DX10: when running the triple monitor setting, my far right monitor always starts off with a black screen. To fix it I have to turn it on and off again so the picture appears or go into a menu option temporary like FSUIPC and go back and then it turns on again. It's quite annoying, that's why I bought the DX10 2.11 Fixer in hopes it would fix it, but it didn't. Anyone else have a workaround this? My 3 monitors are all the same resolution 1920x1080, combined to be 5760x1080 Graphics card: EVGA Geforce 780 TI, driver updated.Please assist, thank you.

Hello. I was able to manage VC shadows "working" but it works only in KSFO airport (Flightbeam addon scenery) and no shadows in any other airports or in the air. Sounds strange but I cannot figure out why does it work on in SFO on the ground only. I did many flights in different areas and weather conditions, no shadows. I read many topics here and checked all setting and it looked normal to me. I wonder what else can cause this issue. W10 Pro, FSX-SE, PMDG 777/NG Thx for looking.

I recent bought and installed the DX10 fixer in FSX. I am running REX essentials HD. Everything has a blue tint. How can I remove this blue tint and get more natural colors. Thank you.

Hi I am using version 2.2 with fsx and haven't had any problems I use the fixer with the default settings that you recommended just noticed that 2.11 is the latest, seen as I have 2.2 and not 2.3 will it be ok to update using the instructions in the pinned post, also like to take this opportunity to thank you for a great program. Thanks, jim

Hello! I come here with a question or a request: I've been using Steve's DX10 fixer for a few months and very happily so. Also sometime ago I tried FS Water Configurator plus. This software finally solved one of the two main issues I had with FS water, this one being the perfect mirroring of the clouds in the sky, no matter what wave effect you chose, making the water appearl like a glass mirror. FSWC+ allows you to distort the reflection adjusting it to the waves you have and creating a much more realistic look. But FSWC+ uses a different water shader. When I use it I loose DX10 Fixer's water settings, namely the other issue I had with FS water - the awful s…

Hi, Yesterday i got a new ssd and uninstalled everything including the fixer off from my main hdd and installed it on to a the new ssd. I totally forgot to uninstall the DX10 fixer libraries before i uninstalled everything and i installed it on to my new ssd and launched it and it says that the libraries are installed and all but 3 boxes are grayed out. The fsx path is box is blank and it wont let me add one so i think it is still trying to read from where i had everything installed before. The fsx.cfg folder is installed in the same place as it was before as it needs to be even if you install fsx on another drive. Is there any way of uninstalling the libraries manually…

Hi Steve, As requested from your PM, I would love to know the answer. http://www.avsim.com/topic/481471-landingtaxi-lights-dont-illuminate-ground-at-dusk/ Cheers

The title says it....Steve asked me to post a screen shot of my diagnostics. Thanks, sherm http://fsfiles.org/flightsimshotsv2/image/Usu and, here is a look at the grayed out option screen http://fsfiles.org/flightsimshotsv2/image/Usb

When I am using PMDG 777 on DX10 with HD Shadows (Airlines Only) as setting, the 3D-external shadow disappears when i get closer to the aircraft. Can anyone help me to solve that? Thanks

There is option in sf to switch it off. Where is the fixer taking visibility range from? Fsx or active sky next? The reason I ask I see clouds drawing far away, below the visibility range.

Massive flickering of the industrial area close to Canberra Airport and it's proving to be a real pain for me. Short history: Never had flickering much, however over the last few months it has become bad. Not only do the buildings flicker but the runways at Canberra Airport also show heavy flickering when viewed for up a bit. (standard approach is OK). Since the problem became really bad I have used the default flight at Friday Harbour to see if flickering is going to occur. On a brand new FSX install everything default, if there's flickering at the taxiway/runway junctions I know it's going to be flickering around Canberra. So, on a brand new install, I chec…

Is there any way/option that one can get DX9 style bloom effects in DX10 mode? DX10 mode is amazing and a godsend with the DX10 Fixer, but I do find myself missing the DX9 bloom with the glare from light sources at times, as it made things feel a bit more "real", while the DX10 bloom kind of feels more like just generic bloom by oversaturating light sources. But my compliments on a fantastic product!

Steve, I am a newbie at DX10, so please bear with me. I recently installed ORX's Southern California and then installed the update to DX10. Two things happened, first I no longer had any profiles - including yours. More importantly my scenery has big gray blocks around the airport I start out from and they stay around me me as I fly. Holger in ORBX says I have an issue with something preventing the correct display of Blendmasks and Generic Bumpmask (I have no idea what that those terms means). He also tell me he thinks I have kind of converter causing the problem. Let me make clear he has says nothing about DX10 causing the problem. I am simply grasping at …

Hi I was wondering what this means, I got a non standard scenery\world\texture\detail1.bmp error in the diagnostics test. I have been having oom problems the last few days ever since loading orbx southern California, I was wondering if this could be a problem because of this file? Thank you for any insight into this. Anthony Marquis I figured it out, for some reason rex4 loaded this file and it is corrupt, I have restored my old textures so I will see if that is the cause of my ooms.

Hello Steve! Thanks for your software and all your work and support here! As a user of the Shockwave Redux lights in DX10 i have to live with the compromise of either converting the Shockwave lights and loosing the visibility over distance, or to leave them unconverted and live with some issues. Today i was thinking of using the "exclude effect" section of the product.ini. The idea is to convert the shockwave landing lights (cause i have the most issues in DX10 with them, and they is no need of having long distance visibility of landing lights,) by un-ticking the corresponding entry in the Fixer software, but to exclude all the beacons and strobes effects via the…

Hello guys, Please is it possible to the VC shadows to display during the dusk/dawn environment of FSX? The shadows look great during day time but only then. They aren't visible at dusk or dawn. I've seen dusk dawn shadows on P3d and they look absolutely stunning. They take immersion to a whole other level. I'd like to know if there is anyway to replicate this with FSX. Thanks.

I have DX10 scenery fixer 2.8 and last version of NGX servicepack. Whatever I set regarding shadows I cannot get VC shadows to work. What is the step by step process?

Hi there, recently I loaded the new Orbx FTX Southern California scenery. In few places e.g. in Santa Barbara area and airport I recognized strange and strong flickering over the whole monitor screen in "full screen mode" at dawn and (less) during night, not at the day. Unfortunately it is impossible to make a self explaing pic of this flickering. Even in much more dense area e.g. Los Angeles no prob. DX9 overall and DX10 window mode(!) work fine. Before I ask Orbx I would appreciate your help and advise as it seems superficially to be a DX10 issue. What I have checked so far: Ground scenery shadows are unswitched. Reduced autogen density. Gone back …

Was really looking forward to this fixer fixing problems with orbx products that shouldn't be there (but that's another topic altogether) but am having serious FPS issues when using this product. Sitting on the heli pad at Jefferson before the fixer I am just about at 20fps with most settings to the right. After the fixer I am at 16, maybe. The difference between 20 and 16 is a lot though when it comes to control. Across the board I'd say my fps is down about 15-20% when running with the fixer. Disabling it returns the fps to normal. I thought I was supposed to get a good boost? Any ideas?

I want to wish you a happy Christmas and a great New Year. Thank you for all your hard work with the Fixer. Mike