PMDG 777

In PMDG 777, it takes about 9 seconds from idle thrust to 55% N1 thrust (then push TOGA button) and seems to be slower spool-up response. In reality, I feel it takes about 7 seconds from idle thrust to 55% N1 thrust. Please give me your comment about true engine spool-up response. Thank you. Tetsuji Konohira

Since the bottom beacon light is illuminating the engines the top beacon light illumination on the wing should also be included. Here are some photos: Wing without beacon light illumination. Wing with beacon light illumination (on the upper part of the wing).

this just started recently with my 777 and my 747, i set heading and my plane is about to catch localiser, but right after the plane just starts to bank left and makes circles, and no matter how hard i try, i cant get the plane to follow the selected heading, any ideas is this a bug?

Hello I have never gotten the error "No land 3" before but on my last few flights i have and now i am on final approach, where the visibiility is almost zero, ios there any way to fix this or any way to prevent "No Land 3"? PMDG 777-300er

Hi, I have read the manual but I couldn't find the answer. The camera supposed to show nose gear and fuselage both side but mine is only a view outside. Is it because I'm using Chaseplane or my setup was not correct? I'm using FSX:SE Thank you, Hoang Le

Hello guys, I installed recently PMDG 777 for P3D version 3.3.5. The installation goes well, also follow the procedure recommended by PMDG for P3D users that indicates the install path from SimConnect packages: <P3D root folder> \ redist \ FSX-SP1 \ lib - SP2-XPACK and RTM Once completed it all, P3D start, I choose PMDG777 in a normal defautl scenary, and the simulator will close after a few seconds in which it appears the cockpit with blacks display with no error message. If I try to uninstall the SimConnect v 10.0.61259.0, the simulator remains open, but the plane remains with all the blacks display.

As title describes, i am familiar with the analog clock, but some of my planes have a digital clock built into PFD, how do i start the elapsed time for this clock?

For the longest time, I had thought my issue was just a poor simulation of the fbw trim, however as I started to watch footage of others flying the 777 more closely, I realized that I might have a problem on my end. What is happening is that I find the aircraft unflyable with out the "show fbw trim" setting enabled. The trim forces are jerky, unpredictable, and non fluid and almost feel like the autopilot has been engaged in the pitch axis to maintain the fbw trim airspeed. I read the introduction manual regarding the trim logic before and after sp1 and I cant understand why others are not having this issue. The trim is supposed to feel just like any other airplane (the 7…

Thought you all may be interested in this great series of CBT videos that I came across. Very in depth videos that clarify a lot of things. There are 78 videos of everything from FMC entry procedures to fuel system descriptions to electrical. Also have videos on differences between 744 and 777. Enjoy! Aviation Chat Club

mornin' ladies and gents - i've been having a problem with the t7 after my new build and reinstall of the t7. I've done a lot of research on this topic and while i found people with similar problems, I haven't found a solution yet. hoping y'all can shed some light on a possible solution. Situation (FSX, WIN 7) Exported a flight plan from FS Build to the T7, while enroute with the T7, I pull up the FSX menu and save the flight. I shut the computer down and later i attempt to restart the saved flight from the "load" option in at the opening screen. (i load directly to the t7, i don't load the default flight first) The flight attempts to load, but once the…

Hello again. Is there any official file with profiles for 777 used with PFPX and Topcat? I have to add the aircrafts but there are many values that I don't know. Thanks. Xiropillo

Hi. I presently own the PMDG B777 for FSX is there an upgrade for P3D or to I have to pay out another 134$ for the same aircraftÉ Thanks. Bat

Tutorial 1.5, pages 53 & 54, mentions ANOR2A approach for EDDM, but there is no ANOR2A in the EDDM ARRIVALS on the CDUs. There are 32 STARS on the 7 pages but the only ANOR** approach is ANOR3A, which shows up twice - once for NDM08L Approach and once for NDM08R. Is this because the latest Navaid has changed the name? The other problem, also on Page 54, is the mention of "Runway 27L". No such runway exists at EDDM, according to the 'AeroSoft Mega Airport Munich' Charts.pdf, which shows only Rwys 08L, 08R, 26L & 26R. Should I therefore choose ANOR3A for the approach and ignore the mention of '27L' ?

Good afternoon, reading the tutorial 1 I see that a tutorial 2 more extended was planned to be published but I couldn't find anything about it. I also have tutorial 1.5 but for FSX. Could you please tell me what happened to Tutorial 2? Is there any tutorial 1.5 for P3D also? I would like to get a tutorial that covers everything from Cold and Dark. Thanks very much.

So I'm getting kind of irritated because I've lost three flights at T/D this weekend due to this fatal error I keep getting. When flying the 777 after a few hours and trying to use one of the displays pop ups my sim will freeze and eventually come up with a fatal error that closes the sim. This issue does not seem to come up earlier in the flights as I am able to use the 2D pop ups (by clicking on the displays) at the beginning of the flights however when I am further into the flight and getting ready to descend I can't click on the displays or I get the fatal error. Here is the following info I pulled from Event Viewer immediately following the error. Faulting …

Hi There, The team at Goldstar Textures is taking requests for the T7 liveries. This si the list so far!: Emirates Sky Cargo Emirates 200LR and 300ER (A6-ECJ & A6-EGO) Virgin Australia 200LR/ER & 300ER Scoot 200ER Etihad Cargo Star Alliance - United Airlines, Singapore Airlines Cathy Pacific Air New Zealand Air China (B-2059) QATAR Cargo/PAX Aerologic So request if you want to !

Normally when i do long haul flights I take off and do some errands and and come back, however lately when i have long haul flights (HKG to YYZ) i come back find the aircraft crashed, or on the ground with the engine/s shutdown, but I still have fuel, this mostly occurs near the polar regions up north near alaska and that area. Is this a failure i need to fix or is it a real life feature of some sorts.

Have recently had problems with the PMDG777 in the following ways, initially I reinstalled the Planes and did as always Activated with the correct codes, but now can only fly the 772 as the panel doesn't work in the 773 have reinstalled the FSXSE SDK which have never had a problem with in the past. The panel will not open with any lights and am unable to move any of the switches also when the plane loads the undercarriage is up an that stays as it is till I shut the FSX SE down

I have an early boxed version of the 777-200. I bought and downloaded the 777-300, but I was unable to upgrade the program, because the early version of the 777-200. How can I proceed? Thanks for your attention Thomas Szego

Greetings! I have planned to fly from Christchurch (NZCH) to Williams (NZWD) and got this error: https://www.dropbox.com/s/kf9ehk7400j5frq/error1.JPG?dl=0 https://www.dropbox.com/s/kf9ehk7400j5frq/error1.JPG?dl=0 Checking the Navdata file I see the following: https://www.dropbox.com/s/mq2jezqf0nycc8k/error3.JPG?dl=0 Can you help me fix this? Thanks. Mike

Is there a way to disable TOGA once it has been enabled? I have it mapped to one of my throttle buttons and accidentally hit it while on a taxiway. I could not find a way to disable it once it was enabled.

Hi, yet again, For the nth time, when CAREFULLY working through Tutorial 1.5 I have managed to evoke that dreaded 'NO ROUTES AVAILABLE' error message in RTE 1 1/2. This is at Page 31 of the Tutorial, where it says: "Go to the RTE page, enter PFO103 (PMDG Flight Ops 103) in the Flight Number field, and then press <REQUEST.". I have checked that PFO103.RTE is present in folder ...\Prepar3D 3.4.18\PMDG\FLIGHTPLANS\777, and I have not got that disastrous 'Estonia' program on my computer. So it must be something else. All steps prior to the ROUTE REQUEST had been completed exactly as the Tutorial instructs and I had successfully completed (also on Page 31):- …

Hello Translated with google I changed my pc, I changed the cpu master card and the video card I am not able to use 777-200 and 777-300 it asks me the activation number I registered the plane appears but There is no wheel and the dial is not functional. I have screenshot with the number Tank you Allo Traduit avec google J'ai modifier mon pc, j'ai changer la carte maîtresse cpu et la carte vidéo je suis pas capable d'utiliser 777-200 et 777-300 il me demande le numéro d'activation je l'inscrit l'avion apparaît mais il ni a pas de roue et les cadran non fonctionnel. J'ai des capture d'écran avec les numéro Merc

On my yesterdays overnight flight i forgot set altitude bug for initial climb level before going to sleep. So the aircraft leveled at FL200 for exact 8 hours. When i came back, i saw the aicraft still cruising at FL200 so i checked fuel prediction. It showed the same 12 tons at arriving in klax as calculated before t/o. I wouldn't say that's normal behaviour. :Shame On You:

Starting to get freezing with rotating blue circle ( starts and stops) after a couple of hours. I am using a lot of orbx scenery. it is not happening with my 737 ngx . Also showing plenty of memory Vas left.