PMDG 777

The reg under the wing says "AT-BBH", should be "A7-BBH"

Just noticed this tonight, but I appear to be getting on average 7 - 10 FPS less with the freighter variants than I do with the passenger models. Reloaded FSX a number of times with various scenarios, and there definitely appears to a consistent framerate drop. Anyone else notice this, or am I just goin' a bit mad, Ted ? 2 x E5450 Xeon Quad Core / 16gb ECC, GTX 285 Example: Freighter EGLL Active RW approx 23 fps / Passenger approx 30-31fps

Hey Guys, I have the problem that the radio frequencies that i set in the PMDG will not sync with the IVAP from IVAO. Also if I rest the squawk in the 777 the frequency changes to 136.350 automatically in the IVAP. Is there a solution?

Usually, this switch is supposed to disable RAAS. If RAAS is not installed as a customer option, does this switch do anything alternatively? Or should it not even be installed in the aircraft? Thanks.

I just saw this ... http://www.simflight.com/2013/09/07/free-flight-deck-magazin-weather-pmdg-777-tool/

First, I'm uncertain whether to post this into this forum or into the FSX CTD forum :rolleyes: FSX keeps crashing whenever I switch on the time compression mode. I usually set it to x16 but occasionally FSX stops in order to load textures or something. On my first flight everything was fine and I reached my destination safely. However, as I was en route from CYUL to EGLL, FSX crashed upon loading the textures. I have attached the results of the appcrashview report on this event: Version=1 EventType=APPCRASH EventTime=130232195814679979 ReportType=2 Consent=1 ReportIdentifier=3780224b-1971-11e3-acb4-00040ec8524a IntegratorReportIdentifier=3780224a-1971-11e3-acb4-00…

hi Does anyone else have the problem of centre mouse wheel click does not turn on all landing lights at same time Gary Stallard

Every time i try to load the 777 fsx crashes all other airplanes work fine.. i have tried to install and reinstall same problem Help Please Cheers Graeme

Just wanted to say, that I'm already working on a LINDA module for the 777. So far, the most important functions are possible to script (what is not granted with every new addon) VRInsight Combo Displays are already synchronised ... I will release the module as soon as I have the first sections ready, meaning, if MCP is ready, I will throw it out that you don't have to wait longer for the rest. Because, the whole plane will be a lot of work. You will find infos, downloads and discussions about as always in the LINDA forum EDIT: Sorry for the double post - this forum is driving me nuts, these days :rolleyes:

First, I'm uncertain whether to post this into this forum or into the FSX CTD forum :rolleyes: FSX keeps crashing whenever I switch on the time compression mode. I usually set it to x16 but occasionally FSX stops in order to load textures or something. On my first flight everything was fine and I reached my destination safely. However, as I was en route from CYUL to EGLL, FSX crashed upon loading the textures. I have attached the results of the appcrashview report on this event: Version=1 EventType=APPCRASH EventTime=130232195814679979 ReportType=2 Consent=1 ReportIdentifier=3780224b-1971-11e3-acb4-00040ec8524a IntegratorReportIdentifier=3780224a-1971-11e3-acb4-00…

First, I'm uncertain whether to post this into this forum or into the FSX CTD forum :rolleyes: FSX keeps crashing whenever I switch on the time compression mode. I usually set it to x16 but occasionally FSX stops in order to load textures or something. On my first flight everything was fine and I reached my destination safely. However, as I was en route from CYUL to EGLL, FSX crashed upon loading the textures. I have attached the results of the appcrashview report on this event: Version=1 EventType=APPCRASH EventTime=130232195814679979 ReportType=2 Consent=1 ReportIdentifier=3780224b-1971-11e3-acb4-00040ec8524a IntegratorReportIdentifier=3780224a-1971-11e3-acb4-00…

Hi! Have anyone else got the problem that the ILS on the NAV/RAD page doesnt autotune? It have happened on all my flights, but the last one between ESSA-ESGG I paid attention to what I did;-) I selected my approach ILS03 and MOXAM1L arrival at ESGG during my descent I got a message saying something like "ILS/CRS FREQ ERROR" or something similar. Then i checked my FMCs NAVRAD page and it said ILS freq 113.00 or something like that. The samething has occured for all my approaches. I am using the latest airac from NAVIGRAPH /Niklas Please remove this thread, double post due to server problems:)

First, I'm uncertain whether to post this into this forum or into the FSX CTD forum :rolleyes: FSX keeps crashing whenever I switch on the time compression mode. I usually set it to x16 but occasionally FSX stops in order to load textures or something. On my first flight everything was fine and I reached my destination safely. However, as I was en route from CYUL to EGLL, FSX crashed upon loading the textures. I have attached the results of the appcrashview report on this event: Version=1 EventType=APPCRASH EventTime=130232195814679979 ReportType=2 Consent=1 ReportIdentifier=3780224b-1971-11e3-acb4-00040ec8524a IntegratorReportIdentifier=3780224a-1971-11e3-acb4-00…

First, I'm uncertain whether to post this into this forum or into the FSX CTD forum :rolleyes: FSX keeps crashing whenever I switch on the time compression mode. I usually set it to x16 but occasionally FSX stops in order to load textures or something. On my first flight everything was fine and I reached my destination safely. However, as I was en route from CYUL to EGLL, FSX crashed upon loading the textures. I have attached the results of the appcrashview report on this event: Version=1 EventType=APPCRASH EventTime=130232195814679979 ReportType=2 Consent=1 ReportIdentifier=3780224b-1971-11e3-acb4-00040ec8524a IntegratorReportIdentifier=3780224a-1971-11e3-acb4-00…

Still a little confused about some things here... I don't seem to able to find a way of assigning keyboard or controller button for EICAS cancel/reset. What's it called in either FSX controls, or better still, FSUIPC? A common problem it seems... Even though I have AP master (Z) assigned, which correctly engages AP, I can only silence the alarm using cancel/reset. Using Z or my controller button, even with a slight delay between presses, doesn't work. Where am i going wrong please? Ta!

I'm not sure what I'm doing wrong, but I've been testing the 777 on just a round trip, from say KLAX to KLAX, just doing a circle around the airport to get the hang of it. I'd program the FMC like it shows on tutorial #1, setting my current position in the POS INIT and then in RTE I would put in KLAX to KLAX, set my dep/arr to KLAX Rwy 7L -> klax ILS 7l No sid/stars, just wanting to circle the airport and come in again to test it out. I'd then go to my legs page, and it would have a discontinuity [][][][] and I would click the one below, and move it up one to close the discontinuity. The ND will show the purple line just fine, circling the airport, and returning to…

Hi all, Just wondering about updates will they be done automatically through the new program or will we have to install them manually? Thanks Greg

Hello, first off hats off to PMDG on this awesome bird... my question might be noob user but anyways, what i am experiencing is not what tutorial shows, i setup my bird for any flight i do use acceleration feature and Pause at TOD, however i get paused at TOD at which point i set my MCP next altitude which is below my cruising altitude, however as soon as I unpause the flight, and bird passes the TOD it does not begin descent even though its flying in VNAN/LNAV mode, is there additional step i am missing or something? in tutorial didn't see anything stating to hit any buttons to let the bird begin descent. Anyways it might be me missing something but want…

Hi all. When beginning a flight from LGW to TPA and loaded up the 777 then continue to load the Long turn panel state which provides the aircraft with external GPU and also AC Cart. When the time came to start the APU for engine start I noticed on the status page that the APU showed it was at 100%n1 and also with an active EGT yet on the overhead the switch was off. It also was not active when I disconnected the ground services and would also not shut down when selecting the APU switch to start, then on, then off. The only solution I found to getting the APU to work was to save my flight quite FS and then reload my saved flight. Any suggestions, or h…

Hi all. When beginning a flight from LGW to TPA and loaded up the 777 then continue to load the Long turn panel state which provides the aircraft with external GPU and also AC Cart. When the time came to start the APU for engine start I noticed on the status page that the APU showed it was at 100%n1 and also with an active EGT yet on the overhead the switch was off. It also was not active when I disconnected the ground services and would also not shut down when selecting the APU switch to start, then on, then off. The only solution I found to getting the APU to work was to save my flight quite FS and then reload my saved flight. Any suggestions, or h…

hi there, i have a small problem with the cold and dark cockpit. To power up the plane you can press the "electrical battery" switch following by pressing the "primary ext pwr" switch. the problem in my case is, that the primary ext pwr switch is not showing the green "available" light. so i Always must start the APU to power up the plane. what am i doing wrong. thanks alex

Good evening Does exist a time limit between the installation and activation with first run of it? Thanks fur quick reply. Best regards Marcel Ambord

Good evening everyone! I were just wondering if any of you on this forum, knows what I should do with the big soundfiles in the 777? It seems like I dont have a super soundcard and this is a problem for me. I have been experiencing that my computer "freeze" for half a second, for loading the sounds on touchdown. (I only experience this on touchdown with the rear landing gears". So what should I do about this? Any tips? I have been searching around and it seems like some of the sounds are recorded longer than necessary? (30 seconds) And I were wondering if it was possible to make these files any smaller? :huh: Best regards Stian.

Hi, Just wondering is anyone getting the CTD on exiting from the flight? I have been getting it consistently with 777, though not a show stopper, more annoying since it leaves a doubt about whether any new settings made during the flight were saved or not. Only get it from time to time on NGX, haven't identified a trend as to why. Lise Morgan

should I land? OMDB 091400Z 14020KT 1200 R12L/1100VP2000D BLDU SCT040CB 33/18 Q1006 WS ALL RWY TEMPO 0500 SS