PMDG 777

PRCH9 DINTY R576 DENNS MAGGI3 How will u enter this route in fmc? Can somebody help me out with this. Thanks.

EDIT: sorry guys and girls, seems I cant change the title of my post anymore. Should be Cant Move 777! Hi All, I am having my first problem with the 777. I cant move the aircraft because the nose wheel has sunken into the ground. The main gears are fine. I am trying to upload a picture but dont know how yet. When I click on image on the interface I am typing in right now it asks for URL?? There is also a field with Attach File, but stillno luck with that either.

I enjoy the program but wanted to make sure the T7 will work w/ FSPax before jumping in.

Hi, please can someone tell me the location of the file that contains all the keyboard commands I have created in the 777. I need to back it up. Thanks

Hello. When i descending altitude and set V/s to let's say "-1800ft" 777 still oscillating beetwen -1500 and -2000ft. Aircraft still moving he's nose up and down like on the rollercoster, and the green line on MCD is also still moving up and down. Is this a normal behaviour of this plane or i just something miss in manual.pdf. I'm using OPUS software but when it's of and weather is from FSX, plane have just same bahaviour. Best regards. Łukasz Musioł

Evening, I decided to go ahead and purchase the 777, aircraft now installed without any problems and plan to do my first flight tomorrow. Now a few questions.... I know there's always the same questions being asked on these forums ie release dates etc etc. So before I continue I apologise in advance if these questions have been already answered. Firstly I never done a lot of reading into the product specs ie what it features and certain things like wing flex blah blah blah, I just bought it knowing PMDG is firsts class when it comes to aircraft like this and this is a thing a beauty already ! I noticed though that it does not include the RR engine variant ? Is there a…

Hi every one If I want to reinstall the T7 I need the reactivate it? P.s , how many times can I activate the t7?

The VC strategy wouldn't be dealable for me without tools like EZDOK. So i started to setup views i'm familiar with. My normal Captain View is shown in pic1: Panels are at 75% to see bigger panels, nearly like i am used from 2D. So the clickspt of the CDU is out of range. That means: i've to zoom out every time i want to popup the CDU and zooming back if i want to see the instrument panels at the same time. So i am asking for a second clickspot for the former 2D lovers. That would make virtual pilots life much easier like you did with MCP. Beside of that EZDOK views do not keep the CDU popup active, if i scroll through the programmed views. S…

Hi guys, I want to start off by saying that this is by far the best addon I've ever used for FSX and I'm sure it will stay that way for a long long time. Anyways, there is one thing I'm very curious about. Very often, I won't do a full flight, but rather, I will load up around 30,000lbs of fuel on the runway and enter the basics such as ZFW to get me my approach speeds. I'll then set flaps 5 and takeoff and perform several touch and go's to stay proficient and touch up and perfect my flare (wanna get good landings for my VA haha). I noticed that a simple touch and go with a half configured FMC and no complete route will cause very different behavior as opposed to a fu…

hi, upon loading any other pmdg 777 aircraft no problem occur but with the emirates livery the fan blades are not showing and the ground power not disconnecting. attached screenshot in order to solve this problem I am re-loading the airplane. although as per the recommendation of PMDG in the intro manual I am loading a default aircraft then choosing T7.

This week made my first flight with the new Triple 7 from PMDG. FedEx flight FDX135 N851FD B777F from KMEM to KJFK. Flight planned with PFPX. Some pictures.... Cargo loading at KMEM with GSX Descending to KJFK at Virginia Turn from west to north Final landing runway 13R

In the 777 introduction it recommends to "Set up a key command for the EICAS Cancel/Recall button." Can anyone tell me how to do this. Thanks, Andy Beard.

Hi fellow painters I have done a few liveries for the 777 now and would like to make it easier for the people who download and use them ... Can someone please direct me to instructions for creating the .ptp files for liveries. Have not had time to read all the manuals yet and need your assistance! Many thanks!!

Hi, Noticed a couple of oddities with the FMC fuel burn calculation. Sat at the gate, shutdown, let's say for a given route, it is estimating 15000 lbs fuel at destination. Just because I started the engines, this immediately drops to 8000 lbs (an example - however this is an actual figure). The only thing I did was start the engines! Another oddity I found is in the VNAV CRZ page. Max fuel at dest is attained through either entering M0.80 cruise, or a CI of zero for ECON speed. Selection of ECON results in a cruise of lets say, M0.844 with a CI of 400, and the same max fuel prediction at destination, as if I had changed the CI to zero. If I manually enter M0.…

Hi Found this problem tonight. Departing EGKK on 26L SID SAM1X. I was cleared to climb above all altitude constraints. I dialled in my new FL on the MCP and pressed the altitude selector knob to clear each restriction in turn which was fine. I then accidentally pushed the knob once to often and found that the FMC had now had entries by each leg of 170kts and my speed was decreasing from 250kts to 170kts. The only way I could accelerate was in FLCH mode. The VNAV page of the FMC was showing I should be climbing at 250kts, but when I selected VNAV again from FLCH the speed would begin to drop to 170kts. I could only accelerate in VNAV mode with a selected speed in the …

Hi all! I have been flying the PMDG B777X since the day it came out (well maybe one day later from release) but I noticed that it can only be loaded up from a default plane----starts up FS X---Then replace the default Cessna with the PMDG B777X. Otherwise if you were to save it as the start up flight, either it crashes the whole flight sim, or just will not initialise when it starts up in flight sim if saved as a "default flight" with the PMDG B777X selected as the start up aircraft. This is definitely a bug with the plane as there is no such difficulty with the PMDG NGX. I think it crashes the PMDG.dll or something like that. As of now, the plane is in the hangar un…

Good day, So i have noticed since the release the FMC has been doing something peculiar with entered LATLON points. The route i am demonstrating is CYYZ to LLBG SEDOG2 YXI MOFAT YWK J583 YDP PRAWN 6200N 05000W 6200N 04000W 6100N 03000W 5800N 02000W PIKIL MOGLO BAKUR UN546 STU UL9 GAVGO UL9 KONAN UL607 KOK UM150 PITES EDISA BIRGI UQ303 NEMEK AKIKA UN132 MAVAR UN130 ESOPO UN130 MES UL609 APLON UL609 LEDRA G18 SOLIN We are going to focus on the latitude and longitude waypoints, So i entered the route on the RTE 1 page from the SID all the way up until PIKIL. Now when i go and line select N62W050 which was entered as N6200.0W05000.0, it displayes in…

Embarrasing! Programmed SID "PORTE5" with CZQ (Clovis) Transition out of KSFO, double-derate engine TO and Climb, entered relevant weather and wind, upon takeoff, the plane consistently is turning too early and missing the SEPDY Waypoint. ATC is giving me grief because the plane is not flying the correct flight path to match the procedure. I'm wondering if the weather and OAT info I entered is confusing the plane? Anyone else experience incorrect TURN PREDICTION in the T7 after takeoff? I know if you don't de-rate and have the plane lightly loaded, the plane will misbehave because essentially it is overpowered compared to its light load (on short hops). Any ti…

Today i have noticed that lower beacon red light do not give any splash on surrounding parts like engines, wheels. Is this effect or lack of it intended or not ?

Hi all, The new PMDG 777 is awesome. However, I do have one issue. Whenever I am on final with an add-on airport, my computer runs out of memory and FSX crashes. I know I have enough RAM (8 gigs). I have read that it is an inherent FSX issue since it is a 32 bit program. Any suggestiions to alleviate this issue. Many thanks, Tony

I've just spent a while trying to figure out some algorithm or process to distribute weight in the same ratio received when setting the FMC Payload to MAX. The following is the method I have worked out. It's a bit of work but it feels good to realize it works when it does. I use PFPX to get a random cargo load then my own math to create weights to input into the FMC. I hope you find this method useful and if you find it to not work please let me know, but I've tried it at least 5 times with different weights and have everything matched. Please note: This is my way not a professional way. Firstly, here's my PFPX Setup for the 777LR (Pax model, not 77F) The aircraft …

Before i get flamed, I know Dx10 isnt supported, or complete etc etc. But with all the recent activity around some tools being developed to better enable it, and to do some testing to see if the freeze problem occurs when using it like it does under DX9, i set the option on and fired up the 777. It all looks good, good cockpit and aircraft model etc. However Im curious as to why the only texture that seems to corrupt is the two arm rests in the cockpit. they appear in the weird microsoft blue image texture that you see sometimes using DX10, everything else is perfectly fine(this is at night by the way) just the two arm rests, and was wondering if there something that …

Posible explanation for OOM's, memory leak, VAS increase without reason etc... Check your IRST driver: http://forum.crucial.com/t5/Solid-State-Drives-SSD/IRST-11-5-0-1207-Removed-by-Intel-Memory-Leak-and-Other-Issues/td-p/104624

hello , here is the report after a scan with jabx detecting missing files. is it normal or not ? thank you ps: n'existe pas = doesn't exist B) (JABx v2.4 Beta.2) lundi 16 septembre 2013, 23:40 Erreurs Appareils : Composants PMDG 777-200LR (20) PMDG 777-200LR PMDG House (5) tableau SimObjects\Airplanes\PMDG 777-200LR\Panel\Panel.cfg (1) pmdg => N'existe pas. sons SimObjects\Airplanes\PMDG 777-200LR\Sound\Sound.cfg (2) xPMDG777_SHUTDOWN1 => N'existe pas. xPMDG777_SHUTDOWN2 => N'existe pas. modèle SimObjects\Airplanes\PMDG 777-200LR\Model\Model.cfg (2) PMDG_777_200LR.MDL.mdl => N'existe pas. PMDG_777_VC.mdl (1) FRESNEL_LLIGHT…

hello , here is the report after a scan with jabx detecting missing files. is it normal or not ? thank you ps: n'existe pas = doesn't exist B) (JABx v2.4 Beta.2) lundi 16 septembre 2013, 23:40 Erreurs Appareils : Composants PMDG 777-200LR (20) PMDG 777-200LR PMDG House (5) tableau SimObjects\Airplanes\PMDG 777-200LR\Panel\Panel.cfg (1) pmdg => N'existe pas. sons SimObjects\Airplanes\PMDG 777-200LR\Sound\Sound.cfg (2) xPMDG777_SHUTDOWN1 => N'existe pas. xPMDG777_SHUTDOWN2 => N'existe pas. modèle SimObjects\Airplanes\PMDG 777-200LR\Model\Model.cfg (2) PMDG_777_200LR.MDL.mdl => N'existe pas. PMDG_777_VC.mdl (1) FRESNEL_LLI…