PMDG 777

Unable to use J routes in fmc?

Hi, just want to ask when does the Update that Fixes The major Bugs in the T7 . best regards dan,

Unable to use J routes in fmc?

Thanks for the T7. I looks great! I have a question concerning the PFD, MFD, & EICAS popup displays. I was able to click on the PFD, MFD and EICAS displays to view the zoomed in displays. However, unlike NGX was I unable to move the zoom displays to other locations around the cockpit. The were fixed in the position where the zoom display opened. Is this correct? I read the manual (pages 0.00.47 to 0.00.59) concerning the popup zoom displays. It does not mention anything about being able to move the popups around to other spots on the screen. I am able to move the FMS and the Radios popup panels around the screen, just not the PFD, MFD, & EICAS popup disp…

Bonjour, I m'arrive quelque chose de très embêtant je n'arrive plus du tout à ouvrir ni à fermer les portes (toutes) du 777. Pourtant tout marchait à merveille depuis l'acquisition, aucun problème j'étais très content. Et soudainement un jour il m'est arrivé ce problème et depuis je ne peut plus voler. Cela me rend dingue. J'ai tout essayé: - désinstallation propre, -réinstallation etc... Rien n'y fait Auriez vous par hasard une solution? Je vous en remercie par avance.

First, let me say I suspect this is likely an FSUIPC vs T7 throttle issue, but the symptom I am observing is this: when I try to advance the throttles to 55% prior to enabling TOGA thrust, the auto-throttle consistently retards the throttles back to idle. I'm confused as to why this would be the case since the A/T is only armed at this point and no active thrust mode has been selected. If I disarm the A/T, this works fine (I can hold the throttles at 55%), but then it's a bit of a multi-click mess trying to get TOGA thrust to kick in. It is my understanding the A/T is typically left armed for the entire takeoff roll. My expectation from the tutorial is that I can advance …

I see the PMDG777 has been released without a 2D panel. Something of a first for PMDG. Having never used a 3D panel could you please explain how you navigate around it. Does it need a TrackIR headset? Thanks.

Lately I have a problem entering flighplans into the FMC Got the message invalid entry when trying to load a PFPX generated flightplan into the T7 FMC At the first try a error message flashes for less than a second showing the destination airport is not in the selected .rte file - import aborted Tried to load a route generated by Vroute - same result Checked the route files and the destination airports are shown in the files .rte files are in the correct fsx directories as examples ehameggl / ehameddf / ehamomdb ehamfaor - not accepted strange is that omdbeham - faoreham are accepted by the fmc - seems that it is not the destination airport but eham is the pro…

Hi Guys ! All my axes are assigned thru FSUICP and Thrttle speed brakes and reverses as well! For an odd reason on the 777 and 737NGX when i activate the reverse set on my saitek Prio yoke lever. The mixture one. Fr all plaes when i pull it back reverse open for the 777 and 737NGX they dont open i need to press F2. Is there a reason? Thanks

Nice 777 Great aircraft , but I notice the landing and taxi light are too low (brightness).That not good when landing at night ,plus to taxi to the gate poor lighting ,Can that be in the next update....Thx electricclay

Today I was preparing a flt plan and the fmc shows data out of date.

Hello everyone! I finally was forced to buy this beauty, but I'm having a small issue. The 777F isn't showing at all in FSX - not even the house colors. I installed 777F aircraft such as Aerologic, Etihad Cargo, etc. but in FSX all I see is "PMDG 777-200LRX." Does anyone know what went wrong here?

Deleted....

I select "NEVER" and then click the LSK 6 "RETURN" button and after exiting FSX and rebooting PC, then restart FSX and reload the 777, the "NEVER" setting reverts to "WHEN FAILED/MISCONFIG" which causes problems with FSInn Radio Stack. I need "NEVER" to be remembered. The EXEC button is NOT LIT after I make a change to the FSX COMMS DISABLED option... is this a bug or a feature? Is there some key sequence I should hit to "SAVE" my changes? Note: All 777 CFG files are NOT READ-ONLY. Thanks.

hi folks here is some shots of my emergency landing due to fire in wheelwell, loose of tire pressures(all tires of the main gears), brakes overheat and an extream crosswind of 45 knts. what a beatiful aircraft ... http://www.youtube.com/watch?v=mlwZaiKv3EI http://www.youtube.com/watch?v=lluer99MP6E

Hey guys my Nvidea GTX 650 TI and Enb series do not get along.... :mellow: Anyone know how to fix this?

I completed around the world in PMDG 777 in 6 LEGS Started at Beijing. I visited there last summer on a business trip and had a chance of a lifetime to climb the great wall. 1. ZBAA- Moscow UUEE; (Cathay Pacific) 2. Moscow UUEE-London EGLL; (British Air) 3. EGLL- Toronto CYYZ; (British Air) 4. CYYZ to NYC KJFK; (Just wanted to fly from JFK) (Air Canada) 5. KJFK-Anchorage PANC, (American Airlines) 6. and PANC-ZBAA.(Cathay Pacific) I picked this route for the flavor of scenery of Asia, Europe and North America PMDG Performed superbly. I used SC and accelearation here and there to cut sometime off. Bill Hagag

Hi all. Like rest of all me too enjoying the T7 but something weird has happened now only. I have started pmdg T7 to takeoff from MMMX and when i am at 100 knots ready to takeoff suddenly my pc has gone blue color but i hear the sounds of gears of T7 rolling even after the computer screen gone blue. This is first time it has happened and i dont know why? recently i have changed my fsx.cfg according to bojotes tweaks and external fps limiter installed and also gpu tweaking is done accordingly. All these are done for first time. before i havent used anything. any ideas? My pc specs are: Processor: Amd phenom processor IIX6 1045T processor 2.7 GHZ GPU: Asus HD79…

I am getting my flight plan from flight aware copying and pasting it into simroutes in the generate routes page. I get the flight plan to load into simroutes I then use the download function to download route into the 777 flight plan folder within FSX. It is saved into a .rte file. I look into the FMC route request menu and I see the file I just save in the 777 flight plan folder. The problem is when I pick this saved route and load it into the FMC and activate the flight plan none of the waypoints r in the RTE page. Can I use simroutes to import a flight plan or do I need something like PFPX. If this is the only way to go can I use the flight plans from flightawa…

I was so amazed of this awesome product that I made a video about it... Might be the 10000th PMDG777 vid but I just wanted to do it Have to remake my FSX colour correction too haha Hope that you enjoy it !! http://www.youtube.com/watch?v=WhiqDSSH27o

Here is the Ezdok profile that I am currently using for flying the PMDG 777-200LR. The video should give people an idea of what is actually happening to the camera and what affects it. You can all use this example to create EZdok profiles to suit your needs and regions that you all fly in. My profile is made for Australia as im currently flying there only. I’ve used the zoom setting of 0.70 in every camera, that’s the lowest figure I would ever use before the FOV becomes too distorted and unrealistic for my liking. Also, all the camera shaking effects are disabled. You can enable and set them up to your preference if you want. The video basically goes through each…

Is there any possibillity to add a key shortcut for popup displays PFD, MAP, EICAS, CDU? Regards Tom

When i run the NGX i get around 25 fps i load up the T7 it drops straight down to 2!. I reinstalled both the T7 and FSX running nothing more then FSX with the T7 on the tarmac no other addons no weather and still at best 2.2 fps what should i do?I read all about those tweaks and stuff but i cant fix this thing for the life of me i need help ASAP i bought it the day after it was released and i havent goten of the ground yet. Kind regards

Hello, I purchased 777 this morning and installed it just fine but when I pick the plane and FSX wanted me to enter the activation code, I entered it and as soon as the box says "done", my whole computer crashed and blue death screen apppeared. I submitted a ticket but have not heard all afternoon. Any one of you experienced this problem and how can I activiate it without death blue screen? Thanks! Brian Pogorek

Hi, Can you please try to download "Microsoft .NET Framework 3.5 Service Pack 1" and retry the PMDG 777 crash situation ? http://www.microsoft.com/en-us/download/confirmation.aspx?id=22 I have tried mine and it seems ok....I might need more tests Thanks, Regis