PMDG 777

Noticed the typo? The in house Air Canada livery has this typo in the selection screen - pls fix it as i can't see it anymore ;).

Hi All, After searching, I think I know the answer to this, BUT ... does anyone know if there is a demo or beta version of PMDG 777? I don't mind if I can't even get it off the ground. I'm sold on it, but before i take the plunge (expensive addon!) I want to be sure it will work. My specs meet the requirements, but you know how temperamental FSX is, based on installed addons, hardware clashed, etc.

Hi, I have the latest 777 version installed into P3Dv4.1 and on all the versions (200 / 300ER / F) when taxiing the nose wheel (and rear main gear wheels) swivel but the aircraft will not make a turn. It literally changes course by a degree or two so essentially, the aircraft continues straight while the nose wheels are at 90 degrees!! I have tried auto rudder on and off in settings. I have rudder pedals and these are calibrated and operational. I have checked on flight control page and it clearly shows rudder moving with pedal movement and of course I see the nose gear swivel in outside view. Also, I have tried at different airports. It is driving me nuts …

Hi FSX is crashing when i fly the 777 but not other aircraft have tried a reinstall. I am running the boxed version of FSX. Paul sheather

dear All It's possible change the number of passengers both 777 and 747 PMDG ?? In the CDU there are values, a minimum and a maximum modifiable, but not real, at least for the companies I like to fly, for example the 777 PMDG has max passengers 234, when Alitalia about 300, the 747 PMDG 416 or 420 while the 747 Virgin 455. These variations make the calculation of weights not real, do you know if there is a way to modify passengers for individual categories ( eco buss first ) ?? Hi and thanks in advance ( and sorry for my bad English ) Andrea

Hey, I just set up a clean windows build with P3dv4 and just installed 777 using the latest installer. I just happened to see that Microsoft Access Database engine 2010 (Spanish) is installed? My windows is set to English as default and I haven't even installed office at this point of the system build. Is this for locked RAAS? and why is Spanish build installed? shouldn't it be English version. Is everything alright?

Is is possible to change the FMC UTC time, possibly on the POS INIT page (enter say 1400Z and press LSK4) without causing a major disruption/crash? I'm currently over the Atlantic during VATSIM CTP 2017 Eastbound and the time is off by 3+04. Thanks, Eric Dziura

Im getting the following message when starting FSX.. RAAS Professional X The R4.CSV file is MISSING! Any ideas ?? FSX works and the 777 works but RAAS is now quiet.. I made no changes to FSX so I am not sure why I am missing something all of the sudden.. I did a forum search for this and found nothing.. Thanks..

Since FSDreamTeam updated GSX with a 3rd loader, I have added the Bulk Cargo loader into the file and you can download it here: https://mega.nz/#!JYtSjTrI!_a86AGJdTCmDihZvG6eoXS-uj0cElUBTf5ae-6I_jeU

Dear Friend / Expertise / Developer I really dont understand why everytime when my approach is stable for landing, i receive the warning sound Dont sink please can i know what i did wrong, here is my uploaded video Best Regards Bikash

Hi, I can not get RAAS (locked version for T7) to work. I did some reading in the forum: Sound is set to the correct speakers (stereo); RAAS is enabled in FMC PMDG options; but found that I have NO "RAASPRO" entry in my dll.xml! How can I add RAASPRO to the dll.xml? Thanks for help

Hello, In tutorial 1 mentioned turning landing lights by middle/wheel clicking, that means turning all the switches,left+nose+right. My question is, after lifting off, should we turn off the nose (middle of the 3 switches) light? (Because the gear is already retracted) Thanks.

Hi folks, not sure whether both is linked, but I think it is likely: 1. I updated to AIRAC 1712 today. 2. My flight preps from Penang to Lahore (WMPK-GEC8991-OPLA) struggled due the FMC notiication 'LN: 276 ERR at GATES'. No runways, SIDs, nor STARs were visible on the DEP/ARR page. 3. I fell back to the previous AIRAC and everything is fine again. Is AIRAC cycle 1712 corrupted or was it a mere coincidence? LN: 276 ERR at GATES

Hi all, I was told by the Operation Center to update my PMDG products (777 and 747 v3) with a the new installers, but now I can't access any 777-300ER aircrafts in FSX. I had a quick look in my FSX folder and all the files where there and looks to be updated. But I can't see them neither in the aircraft list of FSX, nor in the Operation Center variants. It only recognise the B77L and B77F ? Does anyone had this problem ?

Hi .NET Runtime CTD With PMDG 777-300 I dont know if this is specific to the PMDG 777-300 Only in p3d v4.1 I just flown majestic Q400 to AYPY Jackson New Guinea ORBX scenery and no problems. But parked in Flytampa YSSY with ORBX vector, FTX Australia, GSX, weather AS v4, and starting up the bird. These are all same plane, time and place. All the best.. Jens Lognavn: Application Kilde: .NET Runtime Dato: 26-10-2017 20:45:34 Hændelses-id: 1026 Opgavekategori:Ingen Niveau: Fejl Nøgleord: Klassisk Bruger: I/T Computer: Julean-Pc Beskrivelse: Program: Prepar3D…

When I try to install the latest update from the Ops Center I get an error saying the ...PMDG _Updater_77L__P3d.exe is corrupt or unreadable. Uninstalled the aircraft and re-installed, no joy, Deleted the files in the Ops Center, again no joy. All was done as administrator with AV turned off.

Hello, 1. running ASN, set auto load simulator flight plan (checked) ASN setting 2. running FSX and PMDG 777 3. After setting "FSX PLN FILE FOR WX" in simulation section, finishing FMC route and pressing FORCAST request, there came 30000 ft, 20000 ft and 10000 ft wind data. And I can see wx.pln in the directory which my FSX usually store it's flights. wx.pln ASN flight plan My question is, should I expect to see the plan (wx.pln) AUTOMATICALLY appearing in ASN's flight plan column? (I could manually loan it.) Thank you. Frank Tien ----------- pmdg 1.10.8448 asn 1.0.6255.21938 ------------

Hello all, I have reviewed many topics on this and all the items did not work. Including a fresh install of p3d 3.4 (academic version). Currently used add-ons: Aerosoft sceneries PMDG 737/777 ORBX sceneries FSDT Sceneries and GSX ASN (but NOT with newest update as it does not run smooth enough) FlyTampa sceneries (DXB reboot, SYD) Minus ASN, I have verified most recent updates. My rig is as follows: -win 7x64, 16gb ram, 2tb HD, I7 47900 CPU, NVIDIA GTX970 - I typically get about 40-50fps in aerosoft EGLL almost maxed out, so I do not believe ramp or VAS are the issue The issue at hand is this: The last 2 nights I have attempted to fly AA73 LAX…

Using AS16 and have loaded flightplan etc, set it to create and download wx file in p3d in the PMDG settings, the file appears in the WX folder in the PMDG 777 main folder. However it displays weather forecast uplink available in the FMC but when I press the request button it just says request sent and nothing loads. Anyone able to help with this. Thanks Chris.

Hello I just updated my PMDG 777 from the Ops Center. After planning a flight I noticed that the Altitudes and Speed disappear from the Legs page. When I add a manual FL it all shows up, it quickly flashes and then disappears, my manual entry still shows up. Could someone shed some light as to how I can correct this issue? Best - Leon

Good evening everyone, Just a quick question, absolutely not essential. Do you know if in a next update PMDG plans to do something with the COMM page of the mfd ? I'm thinking to the possibility to request TAF/METAR of any airports and print the results on the display. This kind of functions exists on others addons, with the help of ASN, and it is a good feature. This could be a nice addition to this already beautiful simulation of the 777, especially during ETOPS and approach preparation. Thanks a lot and cheers, Bruno thimothe.

Hello, I was just wondering if a fellow pilot could assist me with the autopilot of the 777 (in other words I'm not asking for PMDG staff to help me). Today, I'm flying from RJTT to RCSS. Usually, my flight planning involves a copy and paste of the flight plan of the real flight I see on flightaware. Sticking with this, the real flight is using the AA1B STAR into RCSS. Looking at the chart, I saw something I've never seen before. It says to join (and subsequently fly) a DME arc. Is it possible to program the FMC of the 777 to fly said arc? Or do I have to fly that manually? If it is possible to have the autopilot fly the arc, how would I program the FMC to have the a…

I'd like to replicate some 777-200 and 777-200ER flights and fly them in real time so to be as close as possible. Are the cruise speeds, climb and descent different compared to the 777 LR? Thank you - David Lee

with the upgrade to P3D 4.1 the pmdg 777 livery appears incomplete

Good day everybody, It's after almost 5 days of researches that I'm coming to ask your help. I am a recently new user to P3D V3 and really loving the improvements compared to Flight Simulator X. However, I'm having an issue that lot of people are having from what I heard. I'm a real fan of PMDG work and I am using their PMDG 737 and 777. On both of the aircrafts, when I load it, I'm having black screens, and I can't click on any button. The joystick is all the way up and to the left. I went on lots of forums to see solutions so I wouldn't bother you with a question that has been asked again and again. I've tried installing Simconnect, no changes, I've tried unistalli…