PMDG 777

Hi All, I created this list, is it good ? [ 1 ] PMDG 777-200LRF Base Package RTM.exe [ 2 ] PMDG_777_200LRF_6036_PACK_SP1_.exe [ 3 ] PMDG_777_200LRF_6061_SP1_b_.exe [ 4 ] PMDG 777-200LRF SP1c Update.exe [ 5 ] PMDG_777_300ER__v1.10.6061_EXPANSION_.exe [ 6 ] PMDG 777-300ER SP1c Update.exe Thanks you for your welcome contributions. Regards, -- Pierre-Jean

Back in September, I had a unique vantage point to watch a 777 crew make an interesting early morning short visual approach at IAD. Since it seemed like a fun challenge, I posted it here to give others an opportunity to try their own hand at flying it. For those of you who are unfamiliar, that post is here: http://forum.avsim.net/topic/450840-a-777-challenge/ The other day, in order to stave off a desire to go rent an airplane (which I'll finally be doing again this Saturday, thankfully), I decided to take the 777 for a trip across the Atlantic. In order to make it a little more interesting, I did the flight on VATSIM. As I was partially through my descent, I co…

Hello PMDG, great job guys this is the most ammazing product ever, when is the 747 v2 be released? just kidding! moving to my topic I just have a question regarding weather radar, do i need to re install ASN or something for it to work? or just having ASN on while flying is enough? regarding datauplink, where does the aircraft take the information from? when i requested the data, it gave me a weird payload with random cruising altitude, is it the file i create with PFPX? because pfpx didnt give me that load, it might be the datauplink creates random payload, i got no problem with it just making sure.

Hi everyone, After installing the old style Emirates livery from the Avsim library, I've been unable to use it. Whilst my base installation, including the PMDG house livery and other liveries downloaded through the operations centre continue to work fine, when I load the old Emirates livery, I have a number of issues. Whilst the textures load perfectly onto the external model and result in no visual artefacts, in the cockpit, the control column is stuck fully aft and to the left, nothing is clickable, all DUs, the ISFD and MCDUs are blank. Meanwhile, externally, the gear is retracted and the aircraft just floats above the ground. There is also no sound. I installe…

hmmm. VNAV never worked for me so that's how I have been flying my 777 anyways. I see HOLD on the flght director but it never descent correctly so I mostly do it all manual from T/D.

Hi all: The new Op Center, and aircraft install just fine. I go to add additional liveries using the op center seems to work just like the box version of FSX. I choose which liveries I want and download them. I check in windows explorer and all the folders are where they are supposed to be. I start up FSX-SE and I click on other aircraft,and the only ones that show up are the house colors. Any ideas? Thanks

hello, i have say 6month ago that when i hit the radar test button my fsx crash ( i have not active sky in my fsx ) today i pay for fs2 crew im happy and the fo do the checklist and test all systems and he test the radar system = crash !!! if we not have active sky we can not fly this bird with fs 2 crew ? thanks for your time and your help good day.

So, I just downloaded the new installer for the 777 and it installed fine. I go into FSXSE and when I went to fly it, it didn't have me activate the product and when it loaded, nothing was clickable, and it was basically just a floating model. What have I missed?

Froogle has posted these beauties on his Facebook page. https://www.facebook.com/Frooglesim/posts/730965550352977 Looking great!

Hi! Just checking if anyone else are having this problem... Yesterday during a flight, I entered an approach for rwy 07 (i think) at LICJ, and selected a star... I wasnt happy with the STAR so I changed to another one... The legs page was kind of messed up after this, with the same waypoint coming 2-3 times... Then the winds changed so I had to change rwy to rwy 25 instead, and selected another STAR... then the FMC crashed... and went back to the "fmc startup page" where you can select FMC on the top left button... After that the legs page was inop, I couldnt delete anything, nor insert anything... not even move the waypoints around... I noticed …

Hello, I would like to know how to download the latest update for the 777. I have received a notification in PMDG Operation Center to update to the latest. When I install I get a notepad saying that I should download the full installer and that I have to log into the ecommerce website and go to "view previous orders". I am an ecommerce customer. When I click the download URL within "view previous orders" it says link expired. How can I download the latest installer? Current version I have is 6155 Regards, Adit Maark Yvon

I have multiple 3rd party plane addons but PMDG earns the crown so far as being the buggiest and most frustrating plane to setup in FSX:SE. I am not talking about flying the plane here. I am talking just to get all my setup working. FSX doesn't recognize my Saitek X52 after I load the PMDG plane. It's available when I start the game but as soon as I load an PMDG plane,It's gone. I tried setting up FSUIPC but in controls, I only have the mouse yoke option, when I go to the FSUIPC addons, only about half the buttons on my controller can be set. If I go out of focus to my 2nd screen to search something, something when I get back to FSX, I can no longer hold the spacebar to …

Hi folks! This time storm chasing brought me "the perfect" microburst scenario! (In sense of simulation) Location, Date, Time: EDDG, 2014-07-28, 18:37 UTC (ASN historical weather!) During the approach into EDDG ILS25 the PWS warning depicted a windshear area exactly on short final and overhead the arrival field. Instead of starting the appropriate "escape maneuver" I intentionally continued the approach with "indifferent" actions: actually I only kept course, maintained thrust (67% static N1) and tried "not to hit the ground" via joke inputs. Here is the result... (Remark: please excuse the relatively low resolution of the screenshots. They were made while fl…

I just purchased PMDGs 777 200 installed and started FSX, chose the 777 only to see only the guts and parts of the aircraft. Started free flight and also had the same problem there. I only have the skeleton of the aircraft. Thanks in advance and please, explain like I'm 5(ELI5) how to fix this for my brain hurts.

Title. The cabin lights for my aircrafts are always off. After alot of research i found someone who posted how to do it. FMC - FS ACTIONS - CABIN LIGHTS - MANUAL - Select your intensity. 0% they are off, at 100% they are still off. I tried turning on every light knob on the aircraft, but it stays dark, is this a known issue or something new with steam? Thanks! P.S - Also sometimes my aircraft will load with no gear and no panels on, i need to either end the game or keep switching aircrafts until it resumes normality.

Hi all I have the normal fsx not the Steam version. When I open my ops centre I have 4 updates available do I press ignore or should I update? Thanks

Can anyone kindly assist me with a definitive installation of the 777-200LR/F and -300ER, correctly, in FSX-SE, which I just bought today. I keep getting vague answers when asked elsewhere. I have downloaded the latest full installer, and the OC verifies that I do have the latest version as well as I do see the SE version in the OC. I uninstalled and re-installed both FSX-MS and FSX-SE but when I fire up FSX-SE, and accepting the usual security options, I do not see any undercarriage, am in the C&D start-up mode and cannot even switch the battery on. Any help appreciated. Thanks.

Hello there. Unfortunately, my hard drive needs to be wiped off soon, which means i will need to re-install my PMDG aircraft. I have noticed my installer has expired for my PMDG 777-200LRF and 777-300ER. Am i able to get a link to these installers? Yours Sincerely, djchanas

Hi Team Can I ask, with the PMDG 777, is there a way to get different wind levels to upload to the FMC? The ones I get now are : F330/290/270/250 from PFPX. Christian at PFPX says it's a question I should ask of PMDG. Thanks

Is it possibile, and if so how, to get this lights on the overhead panel? This is a screencapture from Pilotseye.tv with the 777.

Im having this problem where i load up my pmdg 777 and i load cold and dark, i am starting it up when i look up and notice the building that wads just in front of me is gone i go to external view and i cant see my aircraft anymore but its still there, it keeps doing this and every time i load up it takes about 5 mins or so for my textures to fail. I am not running any scenery mods or anything just default fsx. By the way when i start up my FSX and select the 777 on free flight screen there is a window that pops up that says "WARNING: the PMDG product was unable to create its work files. Please make sure you are running Flight simulator X as administrator" So i…

Hi Guys. This has been an ongoing issue for a while, I'm not sure if it's a 777ism or not! Basically during landing there is a distinct lack of pitch up authority. Example, if you get slightly above the glide and pitch down to compensate, then try to recorrect with a pitch up for the flare, even full rearward movement of the controls does little to nothing, which results in a rather... Positive landing. If I disconnect early on the approach it flies fine, all control inputs are responsive, but it's only the last fifty feet or so where I've little to no control in nose up effort. I've noticed on approaches where I'm bang on the glide all the way down it remains respon…

When I run the latest 777LR installer I'm getting the following error after it looks like it finished installing: "Could not locate a valid FSX.cfg location." The only FSX version I have installed is FSX-SE. After I hit "Ok" in the error dialog the installer deletes most of the installed files and I'm unable to access the 777 in game. Anyone else seeing this?

Hello, this is my first post on this forum. I have a issue I'm not sure of. I have EzDok 1.15, the camera feature of the 300s work, but the nose cam is way too zoomed in, all I see is the front wheel, I'm pretty sure this can be fixed, but I can't figure out how. Any help will be appreciated, and the two wing views, some of the aft fuselage are not displayed, is there a fix for this? I can't find one anyway.

Hello PMDG, I am looking where to find my serial of the PMDG 777, when I have selected the 777-200LR in the aircraft menu, I get the warning: initialisation of the license library failed. Can you guys please help me? Kevin Beets