The Prepar3d Forum

Hi guys I've just tried to install PAJN. It seems that the surrounding marshland has installed but not the buildings themselves. I also cannot see any sign of the installation in FTX Central. I've used Estonia Migration for the installation as there is no P3D installer for PAJN. Obviously I'm missing a simple trick, but not sure what.

Since yesterday, when I installed a couple of addons, I get a VPatch error message when starting P3D saying that I dont have the the right Patch. When I uninstall Migration tool the message is gone. I downloaded the latest version from the website (which was the same as I already had), but this didnt change anything. Does anyone know how to fix this?

hi I have fsx running in dx10 preview mode and i decided to go to p3d v 2.4. I've installed p3d v2.4 and very impressed. I began installing my add ons.i've installed ftx global version 1.1 and run p3d v2.4 and every thing worked very well.My problem, when i run mu fsx already installed ( I have ftx global installed as well on fsx) fsx crashes and when i checked the windows event out I didn't found any faulting modules. I have fsx and p3d v2.4 installed on the same drive. Can some one give me a clue how to fix fsx crash? Thx in advance

I can't recall ever see white caps while flying over the ocean... even in high winds. Are there any? Are there any add-ons that add white caps? It seems they should show up even under moderate conditions.

I don't know if this is unique to P3D or not but the problem is that after saving a flight which already has a flight plan loaded, next time I resume the flight the flight plan would be lost. Is there a way to save a flight while also having the loaded flight plan saved too? If not is there a way that after resuming the saved flight the flight plan can be reloaded without resetting the flight back to the starting point?

Hello, Take a look at these shots: http://www.simforums.com/forums/ultimate-terrain-usa-20-almost-ready-for-release_topic50570.html I think about installing this product additionally to Global Vector. What do you think? Patric

Hey guys how do I edit this file to remove ut2services.exe could someome cut and paste it back on this thread please. Thanks. <?xml version="1.0" encoding="windows-1252"?> <SimBase.Document Type="Launch" version="1,0"> <Descr>Launch</Descr> <Filename>exe.xml</Filename> <Disabled>False</Disabled> <Launch.ManualLoad>False</Launch.ManualLoad> <Launch.Addon> <Name>Couatl</Name> <Disabled>False</Disabled> <ManualLoad>False</ManualLoad> <Path>fsdreamteam\couatl\couatl.exe</Path> <CommandLine>--mode=prepar3dv2</Comma…

Hi I have a strange little problem this time, i have looked at all the faq's here & at orbx but nothing . I have just got orbx ftx wales someone got it for me as a present, anyway it looks really great the problem is every time i shut down fsx I get the (fsx has uncounted a problem and will shut down ) window. which is fine because i just closed fsx so no harm done. This has happened once before in the air though after about 10 min which was a bit annoying . if i pull orbx out & repair fsx every thing is ok again. now i have made a backup of the scenery & tex folders from fsx after a repair just in case. dose anyone know how i can install ftx wales in…

If I change to windowed mode and minimize to for instance half my screen, fps shoots in the air. I know this has been discussed for FSX, but it also imminent i Prepar3D. Can anyone explain the reason for this?

I recently installed Copenhagen from Fly tampa. The scenery looks fine, but no traffic is seen on highways and no trains running. When trying to configure options concerning AESlite traffic i get a errormessage. Is not AESLite supported in P3D?? I run ver. 2.4. Regards Ake

I've just started using P3D2.4 and was surprised how well it ran. One thing I dearly miss though is ENB and the ease of toning down the colors with the saturation setting. Is there anything available like that for P3D? Thanks

...has been announced. https://www.youtube.com/watch?v=lw4gWmXwD-I

Hello everyone, I tried to post on the main DSR topic but my question was buried beneath everything else, so I'll try to make a new thread. Anyway, I must be doing something wrong, but I can't get DSR to work with P3D. On FSX it works perfectly, and the result is great, but I'm not having the same results in P3D. Here's the deal: when I change the resolution on the P3D options and go full screen (with alt+enter), my desktop resolution changes, so all I get is a huge mouse cursor, but P3D keeps the same resolution from before, I don't get the tiny menubar. I just get this huge mouse cursor, and my desktop goes to the new resolution, but there's no effect in P3D. …

I noticed during Dawn and Dusk, the layers (weather) are too sharp and totally distracting. If I remove the laywers and use just one layer then this goes away. Any suggestions to have layers and yet solve this issue?

New in GeForce Game Ready Drivers The new GeForce Game Ready driver, release 344.48 WHQL, allows GeForce owners to continue to have the ultimate gaming experience. This driver brings support for Dynamic Super Resolution (DSR) to Kepler and Fermi desktop GPUs. In addition, this Game Ready WHQL driver ensures you'll have the best possible gaming experience for the latest new blockbuster titles including Lords of the Fallen, Civilization: Beyond Earth, and Elite: Dangerous. Game Ready Best gaming experience for Lords of the Fallen, Civilization: Beyond Earth, and Elite: Dangerous Gaming Technology Supports Dynamic Super Resolution (DSR) on Kepler and Fermi-based desktop …

Hi, I'm trying to stabilize my P3D install by finishing up some last installs, therefore I have two questions. I have the x-55 Rhino and I would like to set the Aileron Trim Axis to one of my rotaries, as I have done with my Elevator Trim Axis. However, I'm unable to find this axis in the Prepar3D menu. Second of all, the x-55 has a slider (SBK if I recall correct) which in FSX I could instantly use as my speedbrake wihout any tricks or fancy stuff, however in P3D I cannot get P3D to accept that slider as a Speedbrake. Has anyone had any luck with this? Thanks in advance! Mark

FSX will slowly but surely leave my computer system. I'm already very impressed with the latest P3D version 2.1. I had to buy the P3D Version of the iFly737NG (3.2) just to see what a 737 flight would be like in the latest version. Amazing DX11 gave me total sunlight in the cockpit. I tried a short flight from KLAX to KSFO over MSE V2 scenery and saw fps around 50-60 for most of the flight. Inside the VC was the only time I saw frames drop, sometimes to 28. I disabled the VC Mipmap setting during the flight and my fps shot up to 90-100 before settling down to between 30 and 50 for most of the flight. Wingviews were consistently over 50 fps. Not sure why the fps sud…

Pretty sure I will not have FSX installed for another week. I have just jumped to P3D with all my compatible orbx enhancements and must say I am very impressed. I use Opus but am thinking of going the ASN route. I am currently using Flight Enviro X texture sets and am very pleased (per opus' advice) as I like the soft natural look of them. What are you guys using for cloud textures? Does ASN provide its own? Thank you. Dan

Hi there, to celebrate my intro to P3D period (yes, complete P3D neewb), I purchased a pro license for V2 last night. And while I'm still in awe about the cockpit lighting effects, I apparently have some texture issues. My settings in P3D are pretty much default. I was wondering if anyone would know why my textures are extremely muddy looking? I don't think they're blurry, at least not in a way FSX made textures blurry, they're just not sharp. I'm also having a hard time with the vc cockpit textures, they're pretty hard to read, again they look very blurred (numbers only - eg. airspeed indicator). I've tried to play with the various internal P3D settings, but …

Hi. I was asking at CaptainSim, if their 777 (recent Version 0.9) would have a native P3D installer in the final version, but that was the simple answer... I hope, some day they will regret... ;-) Ralf

HI all Is anyone using OpusFSI? I'm particularly intersted in ugrading to FSI because it seems that it has the same camera functionality as EZDOK. Has anyone bought this recently, and if so, any feedback - specifically on the camera functions?

http://forum.avsim.net/topic/454907-system-mechanic-memory-management-fsx/ If anybody has the latest version of System mechanic, I would be keen to see the result, especially in New York.

I decided I needed to clean up my FSX/FTX/Orbx installation by uninstalling FSX and reisntalling everything again. I uninstalled last evening. This afternoon I reinstalled FSX and everything semmed to go well. It instralled and registered. But when I start it up I get 4 error messages: Scenery.cfg file error, local scenery directory, (C:\fsgux\ant\Scenery) in Scenery Area.121 not found. Scenery.cfg file error, local scenery directory, (C:\fsugx\nam\Scenery) in Scenery Area122 not found. Scenery.cfg file error, local scenery directory, (C:\fsugx\csa\Scenery) in Scenery Area 123 not found. Scenery.cfg file error, local scenery directory, (C:\fsugx\…

I'm a little screwed up with my P3D v2.4 and EZCA. I have Windows 8.1, with FSX installed (before any version of P3D). EZCA worked fine with FSX. When I started P3D 2.0 (around the end of last year), I recall I downloaded shortly after an EXCA .exe file that would work with P3D... this replaced EZCA.exe v1.7, as I recall. I have upgraded P3D v2.x through all of it's versions, in each case a clean install, other than v2.4 where I patched v2.3. Maybe that's the issue, patching rather than a clean install...... since patching to v2.4, as P3D starts, I get the error: FSX Process not found. FSX_handle: 0. EZCA still starts and runs OK, if I ignore this err…

Hello I found a strange situation with P3D 2.4. When i’m in cockpit view (i have a home cockpit) and when i reach 8000 fts above ground all lights on ground disappear (cities, streets, …). But if i change view outside the aircraft all nights are on!!!. What’s wrong?. This bug exist even you fly with a video projector or lcd. Pls help me Many thanks