The Prepar3d Forum

I think I need someone to point out what I am doing wrong here. To install a large program I moved my simobjects and scenery folder from my P3D installation to another drive. After installation of that program I moved the above folders back Now I am unable to load any aircraft within P3DV45 I have reinstalled the client and content as well, no joy Anyone able to spot what I am doing wrong here?

Hello all, After buying and installing the Leonardo Maddog X P3Dv5 I tried to access the Forum and download the textures, I registered, and THREE days later guess what? , No response or approval: Awaiting Approval Your account needs to be approved before you can use the site as a registered member. Well, I paid a lot for this software and I don't have access to support, Forum and liveries? I'm in FltSim since 1995 and I'm surprised with this situation... Please, if you have know any way to contact this person or company, please give me a hint. I thank you in advance.

https://www.prepar3d.com/forum/viewtopic.php?f=6312&t=138392&start=105

Seattle City X is sold as "compatible with Orbx and P3DV5", but after install, the airport buildings at Renton and Boeing Field have disappeared.. I have posted at the DD forum, but struggling with the Polish/English mix.. and have not yet heard back.. Has anyone gone through this and know of a way forward?

AI Lights Reborn Professional Edition version 1.20.0 is now available, be sure to update now in order to be P3D V5 HF2 ready!! Change log: - Integration with Immersion Manager packages from //42 in order to make both programs compatible with effects compilation settings related to P3D V5 new rendering shaders. - Added a runtime configuration / shader verification tool for AI Lights Reborn. This ensures your simulator can start always smooth and have all the required up to date FSReborn required shader configuration in relation to your AI Lights Reborn settings. This also checks if you have installed any of the Immersion packages we wo…

Whenever I update through Orbx Central this gets inserted into my FTXAUv2_05_SCENERY folder and leads to a path not found error when P3D loads. Why? ORBX_AUV2_YSTW_Windsocks_ObjectFlow.xml.disabled-by-ystw Annoyingly this can sometimes stop the P3D load at 80% Now I can get rid of the error message by removing the .disabled-by-ystw text string but it returns after every Orbx Central update most of which having nothing obvious to do with YSTW (Tamworth). Bruceb

PC Specs : AMD Threadripper 1950x, RTX 2080Ti, 32GB Ram at 2933mhz. Troubleshooting steps : I started with 8 fps. I change from limited to 90 to unlimited, I got 2 FPS back. 1. I changed every single graphical settings : same result 2. Completely uninstall and resinstall : same result 3. Loaded MSI Afterburner : GPU Usage : 13%. My CPU Core 0 is always pinned by Prepar3D. That never changed. Every other core was very low usage. Total CPU usage is less than 15%. 4. Loaded the Dash8 in the same airport, same runway : 50 fps. 5. Removed FS2Crew RAAS, TrueGauge and RealLight. dll. : same result Basically, the Airbus is stuck…

I am not sure what these are but they are showing up as blank in my scenery library. https://prnt.sc/t4p45v https://prntscr.com/t4p4oy https://prntscr.com/t4p4f3

Hello everyone, when I attempt to run a repair on V5, the installer prompts me to open the v5 setup, and quits when I cancel the opening of the file. Please see the attached screenshots. https://imgur.com/a/5sLLZcy

Hello Support Takes an exceptional long time to update being more of Independence when firing up the sim P3Dv4.5 especially at the Orbx Vector section Regards Bill Gradwell

Hi, so, I’m pretty spoiled with XP11 when it comes to ortho. What I’m looking for is 1.) A list of ortho sceneries for P3D (V5 if possible). I know about the Orbx true earth ones. 2.) is it possible (and easy) to make your own like in Ortho4XP? 3.) do I need the resolution scenery slider at 7CM for ortho and the mesh slider lower than 5M? many thanks!

Hi, I have a problem. I started at EDDM and wanted to fly to LOWW (Vienna). At the beggining everything is fine, but when I have visual to the ground near Vienna I see Orbx scenery messing up with default ( there are parts of both). When I "Go to Airport: Munich" and I load and get the TOP-DOWN View, I see the same Issue there, but at takeoff everything worked and there was no default scenery... Hardware: I5-9400 3,9 Ghz (overclocked) RAM 8 GB GTX 1060 6GB

As the title explains will this set up smoothly run on p3d v4 with add-ons (PMDG scenery etc)? Thanks

I was looking around to find good repaints for the FeelThere E195(v3), but did not find too many, in fact less than a handful of liveries. Any suggestions?. Cheers, Ed

Hello, bad news for some people: The Aerosoft Airbus is not really compatible with normal AI settings. It doesn't like loading an amount of AI (because you'll get stutters for a few seconds!). I had this inflight (Cruise Level) when the AI for Calgary was loading and the AI for Vancouver (Descent). More info at the aerosoft topic: https://forum.aerosoft.com/index.php?/topic/149704-hugh-problems-when-many-ai-are-loading/&tab=comments#comment-961898 You'll need always - I mean always ! - minimum 18 FPS! Even some seconds below is not accepted by this aircraft. That's the info I'll got from Aerosoft I've a lot of Payware Aircraft, some of them are really m…

I have a reasonable setup i7-8700 Coffee Lake 3.7- 4.7GHz Geforce RTX 2080 Ti 64 GB DDR4 3000 mhz Win 10 on a SSD Flight sims on hard disks Really enjoying the new Orbx sceneries but A smooth flight with P3D v4.5 hf2 but jerky in P3D v5 hf1 P3D v5 is like this even in default mode -in fact shifting sliders/frame rates makes little difference Must be my setup but what? xxd09 PS XPlane 11 flies beautifully too

There were some discussions about this topic in an other thread but I got lost somehow. It is known that Garmin Trainer does not work well with the newest Windows 2004 and thus the Flight1 GTN 750/650 doesn't work either. It was also said that I can roll back to an earlier version of the Trainer. But until now, I was not able to do so. Currently I have the Trainer Package 2700 installed which works fine with F1GTN750 under Windows 1909 but will not work with 2004. What steps are needed to go back to an earlier version of the Trainer which works with F1GTN Complete (v 2.18). I would appreciate any step-by-step guide for a dummy like me (at least in this case).

Hello, I am reinstalling my games and programs after I reset my computer. I am coming across some errors that read that the file is corrupted or that the "source" file is corrupted on both GSX and P3D installers. Is this a problem with my computer or is it the installer? I've tried the basic things like restarting, starting as admin, new installer, all that. My belief is that the computer files may be corrupt after the reset?

I've recently switched back to Prepar3d V4.5 from FSX. In FSX my throttle on my joystick worked perfectly. However in Prepar3d it doesn't work at all, I've calibrated my joystick in the controls, i do however get a response from my throttle on the calibration. But when i'm on the sim nothing at all. I have to use F1, F2, F3 & F4 to control my throttle. Any help? Thanks a lot.

With my current settings it never went over 5.4/6.8. When i fly into the new T.E. region from So.Cal to TE N/Cal to KSFO from KCRQ, it slowly increases until im on final to KSFO and i get the dreaded devise Hung error and my Vram goes to 6.4. Does TE use that much more Vram? Thanks

Hi folks, what can I do to improve the performance in the Los Angeles bassin? When I Fly in this area my fps drops down to 12-15, at LAX (FSDT) somtimes 10-12 fps. It does‘nt matter if I have ORBX SoCal, openLC NA or the default scenery activated, it doesn’t matter if day or night, it doesn’t matter if traffic on or off. In other areas, for example London or Germany (with ORBX Germany North and South) I get minimum 20-25 fps, in other parts of the world 35 (locked at 35 fps). my specs: Intel i7 7700k @5GHz // RTX 2080 // P3d v5 HF1 Any suggestions?

Hello, has anyone ever needed Support for any of the Paulo Ricardo sceneries? I wrote an email repeatedly but I haven't received any answer. I only have the E-Mail address given on simmarket, nothing else.

I wonder if anyone has been through fatal CTD in this airport as I have these days? As it is I'm still running P3Dv.4.5 because I'm not yet fully confident about version 5 actually being fully ready... During taxing the scenery starts with freezing and stutter - finally the whole session will crash to desktop! I have tried to reinstall the scenery without any success and been writing to Imaginesim twice without getting any answer whatsoever! The error could of course arise from many reasons, not necessarily caused by the actual scenery creation from Imaginesim, but in my view absolutely unacceptable with this developer just ignoring their customers - in my cas…

First flight after installing the v4.5 hotfix. 30 minutes into my flight to LSGG, this has happened.....any ideas why ? Thanks

Hello.Unexpectedly the sea outside Visby airport in Sweden disappeared in P3D V.5. There is now land, tree and houses. I have not made any changes to Orbx Central or the airport pack ( Kiruna package). What is wrong? ORBX Vector? Kjelle