PMDG 737NGX | 737NGXu

Couldn't find it.

Hello! I`ve just bought the PMDG 737 NGX and installed it,but then the following error came: "The FSX wasn't found." I`ve edited one time the "fsx.exe" to "FlightSimulator.exe" but then again renamed it to "fsx.exe" , but it doesnt' work. Please help me! Greetings from Germany, David Weiser.

Couldn't find it.

I am proud to say that last night, while flying the RNAV approach into VNKT, I executed a perfect CFIT. Textbook. I was stunned by the perfection. I can now say that I've accomplished the CFIT maneuver, perfectly. :wub: Kattz out.

I'm descending into Las Vegas airport (KLAS) on LNAV and VNAV. FMA: Arm | LNAV | VNAV PTH Passing through 9500 feet Speed: 230 Alt window: 7000 My active way point is Boulder VOR and the legs page shows: BLD 180/5618. I set a hard speed of 180 on the Legs page but the speed tape shows 240 (at the top of the airspeed) and it isn't slowing down as I thought it would. If the Legs page shows a speed of 180 why is 240 still showing at the top of the speed tape? (I have a screen shot of this but I don't see how to attach?)

Performing an ILS approach with two FD on ( master side captain) and both NAV on ILS frequency, at 50 FT RA the bars of FD doesn't disappear and remain on PFD on ground. In autoland instead they disappear at 50 Ft without problem. I had version SP 1C only 800/900 , FSX + UTEX+ FEX and FSUIPC registeresd ( but the axis are form FSX and NOT by FSUIPC)

Hi, I was wondering when the PMDG operation center was coming out for the NGX

I installed the ryanair livery 800 WL. I ran fsx it appeared but later on that day i ran fsx once again and my ryanair livery had disappeared. I tried to load the livery again but its says it alreadys exists but its not in fsx. I've unistalled 737 ngx but the same message comes up, maybe i haven't completely removed all files within fsx is this the case peeps? Not sure where to find all the PMDG files and i don't want to start deleting files.

I installed the ryanair livery 800 WL. I ran fsx it appeared but later on that day i ran fsx once again and my ryanair livery had disappeared. I tried to load the livery again but its says it alreadys exists but its not in fsx. I've unistalled 737 ngx but the same message comes up, maybe i haven't completely removed all files within fsx is this the case peeps? Not sure where to find all the PMDG files and i don't want to start deleting files.

I uploaded ryanair livery it appeared now its gone from fsx! Sha'll i do a complete reinstall of the 737 ngx and delete all files?

I uploaded ryanair livery it appeared now its gone from fsx! Sha'll i do a complete reinstall of the 737 ngx and delete all files?

Hello everyone, I have googled and searched and am not coming up with much. What is the plan behind the 737 SP2 if any? Can one expect something this year or does the T7 have priority at the moment? Best regards, Rene

Hi All This is my first time posting on here so I do apologise now if I'm posting in the wrong area. I have just managed to install in the 737ngx on to prepard3d v2.1 and everything works fine but I can't get the vspeeds to work I have tried everything such has making sure the everything is programmed correctly in to my FMC and making sure the pref init has been executed. Any suggestions would be much appreciated. Thanks Michael

Can anyone suggest a American Flight plan tutorial for the 737 NGX - FMC instructional type lesson . Just getting into this wonderful plane and need BASIC visual instruction on how to load a short flight using the FMC . Appreciate any sugguestions Phil [email protected]

Hi All This is my first time posting on here so I do apologise now if I'm posting in the wrong area. I have just managed to install in the 737ngx on to prepard3d v2.1 and everything works fine but I can't get the vspeeds to work I have tried everything such has making sure the everything is programmed correctly in to my FMC and making sure the pref init has been executed. Any suggestions would be much appreciated. Thanks Michael

Hi All This is my first time posting on here so I do apologise now if I'm posting in the wrong area. I have just managed to install in the 737ngx on to prepard3d v2.1 and everything works fine but I can't get the vspeeds to work I have tried everything such has making sure the everything is programmed correctly in to my FMC and making sure the pref init has been executed. Any suggestions would be much appreciated. Thanks Michael

Hi All This is my first time posting on here so I do apologise now if I'm posting in the wrong area. I have just managed to install in the 737ngx on to prepard3d v2.1 and everything works fine but I can't get the vspeeds to work I have tried everything such has making sure the everything is programmed correctly in to my FMC and making sure the pref init has been executed. Any suggestions would be much appreciated. Thanks Michael

at least after t777 update.. :Nail Biting:

Got it with paypal and didnt get an email or the download at all. Help.

I'm buying the PMDG 737-800 NGX tomorrow and I was wondering, will the FMC automatically caculate waypoints/a route to your desired location or do you have to do it one by one?

When I use the 737 NGX and try to return to the main menu of FSX a fatal error occurs and restart FSX. It only happens when I use the 737 NGX. Could anyone help me?

I want to use the PBD (Place Bearing Distance) feature of the FMC and add this way point using it's lat/long: 40-48-33.480N 073-38-19.750W But what kind of format is that? It's not in a format that the CDU will accept. I tried looking at lat/long conversion formats and did not find this one. It defines the location of an IFR way point in the New York area. I'd like to convert it into a lat/long format that the CDU will accept. Thanks...

Hi there i have the following crash report, this occurs when i end the flight and go to start a new one, this happens every time. i have the UIautomation.dll file in my FSX directory Log Name: Application Source: Application Error Date: 18/03/2014 7:54:31 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: SAM Description: Faulting application name: fsx.exe, version: 10.0.61472.0, time stamp: 0x475e17d3 Faulting module name: PMDG_737NGX.DLL, version: 1.0.0.0, time stamp: 0x4f5162a3 Exception code: 0xc0000005 Fault offset: 0x0023abe6 Faulting process ID: 0x3c64 Faulting applicat…

I was wondering where to get an FMC database update? I'm trying to plan a flight from Los Angeles to JFK. For my arrival I'm planning on doing the LENDY SIX Star and landing on runway ILS 22R. The 22R ILS plate shows RIVRA as the IF but my FMC doesn't like that name. The next way point on the approach HENEB and it accepts that one but not RIVRA. So, I was just thinking that maybe I should update my database? Thanks for any help...

Hi all; I was wondering if there is a way to import flight plan from default FSX flight planner into the CDU with out going through the lengthy normal process? thanks