PMDG 737NGX | 737NGXu

The GPU in my NGX does not make any sound. The air cart and ground start cart do. Any ideas anybody? Greg

Hi all Problem wiht my 737ngx, it's flying his own way when LNAV and VNAV are connected such as COMMAND A. It ownt follow the Purple line on the Navigation display about 70-100NM from T/D (Top of Descent) It also starts to Descent and climb slowly, like a rollercoaster. Anyone who has/have the same issue? Screenshots of my situation: http://gyazo.com/ded79aad6fcf7201ec3dacf958a7b2da http://gyazo.com/a0375bd940e5f423b66f522e811dbb3f

Hi all! So. In every flight with PMDG 737NGX im getting an problem that destroys my flight. After departure and when i reached my final altitude everything is fine. LNAV and VNAV is on such as Autothrottle. The plane is following the ''Purple line'' on the navigation display and everything works perfectly until about 70-100 Nautical Miles (NM) from Top of Descent (T/D). My plane starts to fly it own way and its not following the Purple Line. Then the plane starts to descent slowly and after a while it starts to climb again above my Maximum Altitude. Its like rollercoaster. I tried to disconnect LNAV and VNAV and CMD A (Command A) and sets up the plane righ…

hi everyone does anyone know if there is #3 tutorial of PMDG 737NGX, after landing at Innsbruck (from AMS)? thanks a lot Gilad

Hi, I guess some of you know about 737NGX re-activation problems. 1. I have just submitted a ticket to support and already had an answer telling me I am blocking port 8888. 2. I have a brand new machine, just dedicated exclusively to FSX. No firewall, no antivirus. Just FSX. After 20 days and some addons successfully installed, today I decided to install the 737NGX. I have all my installers backed up. Then the message: "ERROR: Unable to connect to activation server... Please check your internet connection and try again." 3. I have just installed PMDG 777 with NO PROBLEMS of activation. I'm flying it. Of course, it must be a ultra-modern activation system, like the…

Hi, I fly an approach into YSSY sydney, I have done this autoland hundreds of times, I know I have everything set right, eg course, hgs, ils frequency, the aircraft does everything perfect until 500 ft, the aircraft still says land 3, flare and everything but then the nose moves down and it goes into a steep descent and then the autopilot disconnects. This only happens at sydney airports 16L and 16R and it's only being doing it for a few days. I did a full reinstall but still no luck. Help

Hello everybody.I have just reinstalled acceleration pack and till then I have gauge problem.Here are photos.Also I can't click on anything in cockpit.

I try to save plan in the cdu,all I get is the message "Confirm"( PMDG FMC)any help appreciated thanks!

Hello, I started a little project a few months where my goal was to paint every aircraft in TUIfly Nordic's fleet, and now that I have reached my goal, I have continued to paint aircrafts from the other airlines of World of TUI. I just wanted to share them here, and I as I am updating them continuously, I would rather have them in a Dropbox-folder instead of uploading them to the library here at Avsim. If you want to have a look at them, check them out here: https://www.dropbox.com/sh/44fne26dp4m7t7p/uRsENA1AbU

Hello, I started a little project a few months where my goal was to paint every aircraft in TUIfly Nordic's fleet, and now that I have reached my goal, I have continued to paint aircrafts from the other airlines of World of TUI. I just wanted to share them here, and I as I am updating them continuously, I would rather have them in a Dropbox-folder instead of uploading them to the library here at Avsim. If you want to have a look at them, check them out here: https://www.dropbox.com/sh/44fne26dp4m7t7p/uRsENA1AbU Here is a couple of previews for you as well

Hello, I started a little project a few months where my goal was to paint every aircraft in TUIfly Nordic's fleet, and now that I have reached my goal, I have continued to paint aircrafts from the other airlines of World of TUI. I just wanted to share them here, and I as I am updating them continuously, I would rather have them in a Dropbox-folder instead of uploading them to the library here at Avsim. If you want to have a look at them, check them out here: https://www.dropbox.com/sh/44fne26dp4m7t7p/uRsENA1AbU Here is a couple of previews for you as well

Ok i'm following tutorial 2 i'm at cruise and following the fmc steps in the guide. I'm typing in L10 and the route offset by 10 nm happy days, but when i go to do it to the right, R10 it doesnt do it just puts the white dotted line on my current path? Also when i do it for between to waypoints and go to the legs page it should say offset like the tutorial but it doesn't am i missing something? Cheers guys

Dear PMDG Team, why is there no info coming from your side whatsoever (not that I have found) concerning Prepar3d development of your products!? Best regards

When i click shift +1 I get the 3d cockpit.. However the guages do not register. The speed indicator is stuck on 45 while I'm ding 125 knts. The altitude shows zero yet I am at 1000 ft. What is wrong?

Hello, Was taking off from Cardiff today and wasn't sure how to calculate the length of runway required to get airborne and when stopping on roll out in Majorca and was wondering if there is an easy way of calculating this, allowing you to get a MTOW from the length of runway you are due to depart from. Thanks very much Conor

Hi. I was just wondering if anyone out there had a copy of the late Steve Inwood's sound modifications for the NGX, Touchdown, Reverse, Groundroll, etc..... I had to do a re-install and lost them in the process. All the download links now do not work. Any help much appreciated. Martin.

Hello! (im from belgieum so my inglish is not super) First of all im Mert and i bought a pmdg aircraft. But my parking brakes are not working after i start to taxi The little red light is on but 'the parking brake is set' text is not on. My wheel chocks set is not working too after i start to taxi. Do you guys know how i can fix this? Mert Tekelioglu

Hello! (im from belgieum so my inglish is not super) First of all im Mert and i bought a pmdg aircraft. But my parking brakes are not working after i start to taxi The little red light is on but 'the parking brake is set' text is not on. My wheel chocks set is not working too after i start to taxi. Do you guys know how i can fix this? Mert Tekelioglu

Hello! (im from belgieum so my inglish is not super) First of all im Mert and i bought a pmdg aircraft. But my parking brakes are not working after i start to taxi The little red light is on but 'the parking brake is set' text is not on. My wheel chocks set is not working too after i start to taxi. Do you guys know how i can fix this? Mert Tekelioglu

Hello! (im from belgieum so my inglish is not super) First of all im Mert and i bought a pmdg aircraft. But my parking brakes are not working after i start to taxi The little red light is on but 'the parking brake is set' text is not on. My wheel chocks set is not working too after i start to taxi. Do you guys know how i can fix this? Mert Tekelioglu

Hello all, Maybe one of you can help me? When I start up my FSX and choose PMDG 738 NGX I encounter a problem? When in Cockpit view in 2D my outside view is focused to the ground more then forward. To do any action as taxi or t/o I have to switch to outside view. Is there any setting to raise the screen more upwards? Waiting any reply anf thank you in advance Frans van Zantbeek

Hi All and happy easter! So like many people i have now purchased P3D, I have been on Youtube and seen a few videos of the NGX working in P3D. Is it official that PMDG products are able to work in P3D? If so is anyone able to shred some light on how you make the NGX work Kind regards

This is asking me to activate my product -- it's the same computer I've had since I bought and installed it 3 years ago! I searched and found my old activation code but I get this error: "ERROR: flxActCommonRepairLocalTrustedStorage - (50044,71013,1)" My only option is to click "OK" then it asks me for my activation code again. I see PMDG has stopped supporting their products -- anybody know of a way to activate it? Is there a registry entry I can do manually?

Hello, Was taking off from Cardiff today and wasn't sure how to calculate the length of runway required to get airborne and when stopping on roll out in Majorca and was wondering if there is an easy way of calculating this, allowing you to get a MTOW from the length of runway you are due to depart from. Thanks very much Conor

Hey everyone. After flying the Majestic Q400 for a while, I think I'm ready to take advantage of my NGX. I have FS2Crew which will make things substantially easier for me, however, is their a good set of flows (outside of the included ones) that might help me get a handle on this thing? Similarly, is there a good tutorial out there I haven't seen? I've looked at froogle's a number of times and it's been very helpful, but sometimes it just takes someone else to really set everything straight. Thanks a lot.