PMDG General Forum

https://youtu.be/nmefnkTvWIw

Hi, I've just tried to update the 747 QOS product via the Operations Centre as it notified me that an update was available. However, when I clicked on update the following message appeared: Any idea why? Thanks. Lucas Gozzard.

Just like to say a quick thank you to Robert and the gang. A perfect match has been made! Thanks for "making me" buy the QOTSV2

As the title says, after installing my PMDG 747 and 777, the operation center is not to be found anywhere, and after installing the add-ons, they are not showing as installed on the operation center? I hope someone can help me. Also i am running v4. Thanks in advance.

Happy Father's day everyone! Wake up this morning to find an update to Operations Center. Which I dutifully download as I sip my morning coffee. Once the update is installed, I open her up to see what's new and nearly spit my coffee all over my monitor as I find: The DC-6???? For Prepar3d???? BEST FATHER'S DAY EVER!!!!! Until I click the "Buy Now" button in Ops Center and am taken to the product page... I understand how inflation works, but that's a tad ridiculous, boys...

I recently moved and my IP required me to abandon my old email addee due to its domain not being supported any longer. However, now I cannot access my account at PMDG to get the 777 update to P3DV4 for I forgot the password and cannot retrieve the password using the email that no longer exists,. Any way of getting my account opened again?

Hello guys, Something happened to my p3d v3 and I can't open it anymore (its crushing to desktop with fatal error message) and I need to uninstall and reinstall it again. I have the PMDG 737 NGX & 777 installed on p3d. Since I cant deactivated these trough the FMC before uninstalling the p3d, I wounder what is the proper way to uninstall the PMDG products, so I'll be able to install them again later on while using the activation code I got when I bought them? Thank you in advance, Shy

Hi, I just downloaded the : "PMDG 737-600/700 NGX Expansion for FSX" and my activation key does not work. I receive a error: Invalid Activation ID: N...-....-....-....-....-...8 [incident # 1128-734966] Thanks for help

I flew the NGX into EDDF this morning on the ILS Z Rwy 25. My Navigraph and Navigraph charts are up to date. The approach on the plate showed a long, even downwind with a squared off base to final. In the FMS it was a lot different with a completely different shape and completely different fixes. I'm not at my sim so I can't provide a screenshot, unfortunately. Is anyone else seeing this?

After downloading and installing ORBX Scenery package (The FTX Global Series), it took many days to get FSX-SE to work properly. However, once it worked, my Operations Center Updater was gone. I looked up the reload process and got the OPS Ctr back (some of it). Now, only the PMDG FSX series is listed as available (737NGX and 777) no FSX-SE versions. Any suggestions?

Folks, I'm posting here as, so far at least, I have only been able to replicate the issue when in a PMDG (777 or 747QOTSII) - that said, I am NOT yet convinced that this is tied to PMDG aircraft. I keep getting the dreaded Blue Screen or complete computer freeze (requiring a hard reset to get out of it). If I get the Blue Screen, it refers to "Driver Power State Failure". I've done a google on this and whilst it isn't unheard of, I can't find anything definitive to narrow down the issue or even find a fix. What I'm seeing: Between 5 and 30 mins in aircraft (777 or 747QOTSII) freeze or blue screen (as above) Doesn't appear to happen in ot…

I have yet to finish a flight of 4 hours or longer with the 777 in P3Dv4. Either the sim just CTD or CTD's when I click on the CA side PFD, I am looking at trying a flight only using the FO side PFD. There is no error code left in the Event Viewer or APP CRASH. I have had a bglman error code recently. I don't believe I am pushing the system anymore than I did in v3 Is anyone else having this issue, of so have you found a solution. It is kind of a waste of time and disappointing to fly 4400 miles only to CTD on decent. Thanks Randy Smith

Captains, Tonight we have published a series of updates for the 747-400 product line. You can get the updates via the Operations Center, or by downloading the installer directly from your ecommerce account at our eCommerce site. Here is some background to help you understand what we did tonight: PMDG 747-400 Queen of the Skies II for Prepar3D v4: Along with a few minor tweaks, this product was updated to temporarily disable a process that allowed users to connect the 747 to Squawkbox/IVAP using FSUIPC. This connection process was causing the 747 to fail and will be reintroduced once a solution is found. This disablement only affects Prepar3D v4. PM…

Hey pmdg, Curious, i have V3 right now. Im still waitong for other addons to update before i move to V4. If i buy the 737ngx and the dc6 "when its released" on V3. Will i still be able to upgrade free of cost when i get V4?? Thanks, Goan

The one sound that always gets me going is when pressurizing the hydraulics in the NGX. After the meticulous preflight setup, when I finally get to powering up the hydraulic pumps to hear that high pitched whine, it's a sure sign that I'm just about ready to go. A close second is "brakes off here we go" during the pushback sequence. I actually say that in my car every time I start to back out of the driveway! Ah, good stuff coming our way in p3dv4 real soon :)

I've been struggling with myself whether to ask this question at all for some time, but decided to, because it's driving me somewhat insane. And has been for a while. Sometimes (cannot reliably reproduce, and am not 100% sure what triggers it), I noticed that autopilot* (FD, FMC, again not sure) arms the approach mode without me being anywhere near approach, or doing so manually. This very often happens on departure, even though I've selected (armed) VNAV/LNAV, or if I haven't. I've observed aircraft happily do nothing about this, as well as attempt to fly some approach, after intercepting "something". This is particularly frustrating on departure, to the poin…

I watched two stream today on Twitch and it was noticed that when the users had the PMDG 747 ground service vehicles out, not all of them at one they noticed poor camera viewing when the vehicles were out. Once they removed the vehicles it was smooth again. They said something about not being converted in the SDK. Are the vehicles updated for v4 and will we see a performance hit when there out? Just wondering.

Any update on how soon for PD3V4 with the greatest product you have ' that,s my humble opinion. of the 737 NGX.

Good morning all, I wanted to start a new thread here to hopefully bring some attention back to the possibility of a True shared cockpit experience being supported by PMDG. Several plane makers now have their own shared cockpit software built into the planes, and many of the X-plane developers fully support programs like smart co-pilot that provide a fully functional shared cockpit experience, even down to FMC usage etc. In my opinion, and I am sure many others here share the same, PMDG is at the top of the stack for payware aircraft quality. Their releases generally take time, but they release top notch products that you can guarantee are going to be the most rea…

Hi, I have two errors messages when using PMDG 737 ngx. I get an ''GDIPLUS.DLL'' error when i switch between the PMDG livery's in the FSX-SE menu. When i switch 3 times i get this error. But when i finished loading an PMDG aircraf, when loading (count down) all the systems starting from 19, it will stuck at 10, sometimes at 9, i get an ''MSVRC80.DLL'' error. Just recently, I had an error called ''PMDG_737NGX.DLL'' but that problem has been resolved. I downloaded wrong graphics drivers. At that moment I could not switch between the PMDG livery's. I have windows 10 running 64 bit and FSX steam edition. At the moment the user account control (UAC) has a…

Hello, I have a quick question. If I purchased PMDG products from Aerosoft BEFORE the new store design came in, I can download the new versions once they are out right? Thanks in advance.

An exception has occured! I hope someone knows how to fix this. Please contact PMDG support by submitting a ticket at http://support.precisionmanuals.com for help with resolving this issue. Press "Copy to clipboard" below and then paste the information into your support ticket. Additionally, a log file has been created at: c:\users\flybo\appdata\roaming\pmdg\pmdg operations center\PMDG Operations Center.log Please attach this file to better help us fix this issue. The application will now exit. 06/14/17 11:00:03 Exception: Access Violation at 0x0 012A0000 C:\Program Files (x86)\PMDG Operations Center\PMDG Operations Center…

Hello everybody, since more then three days I have the problem to send an e-mail to PMDG support. I need to get an activation reset for my B737 NGX license after reaching maximum extra activations exceed. The problem is that I cannot reach the support website of PMDG. I lost my password of the PMDG forum, fulfilled the contact request formular for a new password several times and got always the information that there was ent a new password to my e-mail account but nothing happened and I didn't get anything So please, does anyoneone knows how can I send a message to PMDG to get a reset of my activation license account ? Best regards and many thanks…

When I first load with PMDG 747 they are seen to be fine but when I switch a Default plane then switch back to they won't load at all( In-game where 747 fail to load as second time)I did follow the PMDG General from(FSX: SE) and as well as trying to uninstall and reinstall and run and/or Repair the SDK and 3 others too but not working even Run as administrator on FSX with the same thing to my PMDG 747. .

Will it have these weather effects?