PMDG General Forum

After flying the first leg, landing and then taking off for a second leg, upon reaching the point of T/D, it does not show on the ND. While on the ground prior to my second leg, I deleted the previous route and reloaded the FMC properly and had all the waypoints with spd/altitude restrictions for the STAR I was going in on setup correctly but it does not show the T/D for some reason? Also after flying the first leg, on subsequent legs the VNAV keeps disconnecting with the FMC saying, "unachievable descent path" or something similar. It is saying this on a published STAR that I have flown many times? All the FMC alt/spd entries are correct with what the STAR says but the F…

If I order the PMDG737 and install it in 'COF', will the 'Installer' incorporate the new patch that was recently released??If the installer does not contain the updated patch, should I wait until 'Patch 2' is out..Regards,jack noullet

I have been using the 737-600700 and I have read the PIC 767 FMC manual and there is alot more info that goes into the PMDG FMC than the PIC 767.I see that there is a very real need for a 737-600700 fmc manual.The PIC manual is very good but only goes so far.I only hope that PMDG sees that and will write a manual. JeffG

Hi! I tryed to post this yesterday, but it seems you have deleted my post :( but i can't found solution in FAQ's or other posts..I have problem with navigation database.I have pmdg 737 with SU1, and FS2004. I installed navdata package into fs2004.As you see on my screenshot, UWWW is far from me.. But it my 737 now is staying at the GATE AT UWWW. This happens with EVERY AIRPORT. And i have problems with some waypoints..please, if you can't answer here, answer by mailcooler2k @ pisem.netthanks!

Here's another livery in work.http://forums.avsim.net/user_files/30007.jpg

Hi, Anybody have an awnser,After installing the new 737NG version on fs9 with sp1 i get some strange things happening with my throttles.On one ocasion i get that the throttles come back from 100 to 0 automaticly even if i push them to 100 % on the ch products flight yoke. So they are at 100% but the sim refuses to accept this. (In the normal 737-300 from MS all works fine). The strange thing is that also in the throttle view i see them going down again.When i then try an other livery ( Alaskaair) the throttles wont come back to more then 50% so from 100 to 50% and nothing below. So the max is 100 the mins are 50%So some facts.A/T OFFF/D OFFAutopilot OFF (Im on the ground)…

Hi guys, I just filled in a long flight plan in the FMC from Brusselsto Luxor in Egypt. (Three pages)What are the steps to save this in the FMC in view of a repeat flight? Thank you for any help.

HiWhat is the expected release date for the patch dealing with the Vnav anomolies etc?These bugs are getting old now.Best RegardsTed

http://forums.avsim.net/user_files/29835.jpgClearing KDFWhttp://forums.avsim.net/user_files/29836.jpgTropical storm lighting strikehttp://forums.avsim.net/user_files/29837.jpgBusy KHAM http://forums.avsim.net/user_files/29838.jpgCold and snowy Edmonton International. I think I actually saw snow blowing off the runway as I taxied in!

hi,Is it just me or does the pmdg 737 slow down too soon when you land in fs2004? I mean I dont even need to use reversers or brakes. The spoilers bring it down to like taxi speed in no time. In fs2002 it took a lot more effort to slow the aircraft down, which seemed much more realistic. It just doesent feel right to be able to easily coast to a stop without using wheel brakes or reversers. :-( Andrew PS. EX. 24R at klax I land on the numbers and Im down to taxi speed with just spoilers even before reaching half the runway length.

Hi,Just trying all avenues to reach the support team. Yesterday I ordered the 737 but never got an email with a link to the installer. I sent an email to [email protected] but have not gotten a reply.I know you guys are busy with day jobs, but if you get a chance could somebody check that email account and reply.Thanks,Jim Mendes

HiI have now for 4 hours been trying to get the Airac file for my new 737NG, no luck yet.I would really appreciate if someone would send me the file to [email protected] a lotBest rgds.Thomas Brix

I came home from vacation this Sunday, and have to this day, not had the opportunity to download the new AIRAC...The website doesn't show properly, isn't there any way for you PMDG to maybe help the site out, or host the AIRAC on your site until Stefan's site is up again?Boaz...

Will we eventualy have the option of both the 2d views and the virtual cockpit? ThanksAndrew

Hey guys, just bought the 73 today and its marvelous. Only problem is that i cant get a FMC database from that website on PMDG. Its down for whatever reason. Anywhere else I can get a db for the fmc?One other issue, is anyone having problems with the VC on the Airforce 89th livery? None of the textures show up in vc, just that dull grey. Seems to be a bigger hit on my FPS on that livery as well. LaterzMax

Where do you place the NAVDATA files so the FMC will work in FS2004? I load a FP into FS2004; place the aircraft, open the FMC then it tells me that KSEA is "NOT IN DATABASE" and says the NAV DATA is NOT_VALID. In FS2002 I have navdata in the FMCWP folder and it works perfectly. Sorry if this has been asked before but after searching the files and this forum I have been unable to find the answer.

Robert, Lefteris, et alI'm am truly impressed with the quality of this product and it is my new standard for aircraft/panels (using FS2k2 with your latest update patch, haven't gone to FS9 yet). I'm learning some tuning tricks so the frame rates are acceptable and the stuttering is almost non-existent. So I'm very pleased with what you have accomplished.Question: Is it possible that there is a module in your package that would cause FS2002.exe to continue processing after exiting FS2K2? The reason I ask is that after flying your airplane this always happens, and in fact it is still processing as I write this, some 30 minutes after I quit FS2k2. I also use the SSW A31…

Currently have the following:AMD 1.4c, 512MB DDR, Original GeForce 3 (64MB)Is it worth the effort to pick up COF & PMDG's 737 or am I more realistically looking at dropping some money into a P4 3.2/GF 5900FX combo to not be unhappy?I'm not blaming the app or anything, just asking for info from folks who have similar configurations so I know if it's time for a new machine. I generally do a full machine upgrade every 3 or 4 years, I guess the question comes down to is this the time to do so?Ray(crossposted in MS forum)

Hi PMDG Team,I was just interested if you're planing to paint an Air Seychelleslivery, since they started flying this bird in November 2001.One more plane for your Africa group :-).ThanksChristianhttp://www.flightsimnetwork.com/dcforum/Us...31866333774.jpg

I was looking in one of the SIDS and noticed that it was created by Free Converter 2.23 Created by Terry Yingling. Where can I find this program?

Dear PMDG,What is the policy going to be when the 800 series come out. Is it going to be an addon to the current release or is it going to be a seperate package.If so do current users of the 600/700 series get an discount?I know its a bit premature to ask but i'm waiting for the 800's but ill fly the 700 till then...Mike HorstenPolarairways.comThe Gateway VA to the NorthBased At EHAM (Amsterdam Schiphol)

When flying the NG in FS2002 I can load my saved flightplans via the "CO ROUTE" LSK. When I try this within fs9 absolutely nothing happens. No "Route not in database" or something else and of course the route is not loaded. The .rte-file is located where it used to be: "FS9PMDGFLIGHTPLANS"Any ideas?ThanksArt Vandalay

Heo!Guys, can someone please send me cold and dark situation file. It was not yet included in the patch when I downloaded it and I don't want to load 15MB with modem again to get it.My e-mail: [email protected] and thank you!Regards, Nejc

After loading the 737 in 2004, I still un able to locate the panel light switch. I read the manual and it doesn't mention the location. where is the switch??Bill M

Hi, I installed today FS 2004 and of course the first thing which I installed was the PDMG.1. It doesnt recognize navdata: I opened a folder called FMCWP and installed there the navdata and not possible to recognize it2. the electrical panel is behind the main panel, so, you can not see it completely, but just the upper half of the panel3. the sound is completely cut, with lots of cuts, all the time, so, not continuous4. also the panel is flickering, so in spaces of seconds it appears and disappears all the time5. and of course, the eternal question of the frame rates: not really famous!!! I have athlon 2500 XP, 512 DDR 333, and geforce 2 - GTO/PRO with 64 megabites6. not…