The TileProxy Project Forum

Hi,I'm still having dificulties to properlly close the program. Please see my previous post bellow:http://forums.avsim.net/dcboard.php?az=sho...=2036&mode=fullI managed to do it sometimes by closing I think it was FLTMC.exe from the task manager, but now it won't close. It's been a month since I last used this and I cannot remember the proceedure I did before that worked, so if possible a mini-tutorial on the proper way to close and restart without having to logoff and login to windows again. Thanks all.Andy

I never saw this program until today but if I install it, does it change a bunch of stuff which will mess up my FSX installation if I happen to want to uninstall it? I am assuming I can turn it on and off.. yes?Thanks guys

Hello,I've tried out TP a few months ago and after a long break decided to check out what's new, so I got B6 today. Not sure if I did anything wrong, but this is what FS looks like, and I tried the V*** and the G*** services. They both looked the same, see attachment. Whereas the G one also gave lots of redirects, so maybe that might be the cause...!? V didn't, as far as I have seen. Anti virus is turned off.Anything I mighta missed?Thanks in advance.Etienne

Could someone please post, or send, a correct config file to be used for TileProxy? I am really excited, reading about all these great experiences, but I am not a programmer or IT professional. Just a long time grateful flight simmer.I would reaaly appreciate a short tuorial with a good config file.Thank you VERY much,Howard

While working through the install process on a hp quad running vista i have run into this error and would dearly love a bit of adviceAccess is denied.The system cannot find the file specified.Could Not Find C:Program FilesMicrosoft GamesMicrosoft Flight Simulator XTileProxypwd.txtDirectory is on drive C:Load failed with error: 0x80070005Access is denied.Attach failed with error: 0x80070005Access is denied.proxyUser: will operate on drive C:proxyUser: Volume listing failed with error: 0x80070005proxyUser: Configuration summary master_enable=1 offline_mode=0 menu_sources=Service Example 1|Service Example 2|Service Example 3|Serv…

moved this out of another thread to its own, sorry but couldnt figure out how to delete my old one....So i found the yahoo settings and checked out my area on their website (they do have correct high res images). I plugged in the settings and still get blurred/pizelated images (diff from when i used VE, but still no where near as sharp as I see on their online maps. How do i determine their most updated version (or is that not even the issue here? I also uninstalled and reinstalled tileproxy. Here are my current settings:cache_folder=d:TileProxycache.service3network_module=libnettilemodule_config="conn=20|rate=2.0|verbose=1|server=http://us.maps3.*****.com|path=/aerial.ma…

I've now got a test system running a quad Q6600 chip at my disposal. I took a very cheap upgrade route by reusing a lot of older components and using a motherboard with AGP and DDR I support ;-)So now I can test with a 64 Bit Windows and fix the installer issues.And I can optimize the preload mechanism for use with a Quad Core (or better) system..I was getting around 800-900 tiles per seconds while starting FSX and all 4 cores pegged at 100%.Christian

Christian,First, I want thank you for the contributions that TileProxy has made to my real-world VFR flying. TileProxy has eliminated a great deal of the anxiety associated with landing at unfamiliar airports by allowing me to pre-fly those arrivals while seeing the actual roads, highway intersections, buildings and landmarks. I also feel safer because I feel familiar when entering the area.Now to my question: Would you consider developing a version of TileProxy that acts as a scenery

New satellite to sharpen Google EarthFri Sep 14, 2007 2:58pm ET148By Andrea Shalal-EsaWASHINGTON (Reuters) - DigitalGlobe, provider of imagery for Google Inc's interactive mapping program Google Earth, said a new high-resolution satellite will boost the accuracy of its satellite images and flesh out its archive.The new spacecraft, dubbed WorldView I, is to be launched on Tuesday.Together with the company's existing Quickbird satellite, it will offer half-meter resolution and will be able to collect over 600,000 square kilometers of imagery each day, up from the current collection of that amount each week, Chief Executive Jill Smith told Reuters in a telephone interview. "…

I've just downloaded TP for a test drive. I'm using the service configs from http://edtruthan.com/tileproxy/ini/. How long is it supposed to take to load FS9 using TileProxy? I've been stuck with the "Loading Terrain" progress bar at 28% for five minutes now.

i am getting 300-600 tiles per second normally, when cache starts flushing it flushes every other second and my tile load slows down to 3-40 tiles per second.any suggestions?tero

Hello all, this program looks great but cannot figure how to create my INI file, Im using the latest beta 6 build, could someone please send me a working one please to, [email protected] thank-you.

Hi everybody,Since several days I am reading everything about TP.Here I have a selfbuilt 747 cockpit with 2 projectors for outside view.I have 2 client pc's with PM.Photorealistic ground scenery is the best to have, so TP is a wonderfull addon.To be able to fly with a jet above photo-scenery I use FsEarth between FSX and Google earth. I start my flights with FSX scnery and when passing 3000 ft I minimize the FSX view and maximize the Google view ( in tilted mode ).In that way i can fly with jet speeds.Very impressive on my 11ft wide screen.Unfortunately no clouds...And I have to switch between the Google view and FSX view when lading/climbing.It would be perfect if ever…

Just a small practical tip:In the Service Example 2 (the big G... provider) you can use these statements in the INI filemin_level=5max_level=17level_mapping=5,6,7,8,9,10,11,13,13,14,15,16,17to get a larger radius of high quality terrain around your aircraft. I used it successfully in the Swiss Alps. Now the brownish appearance of some mountains has been pushed further out towards the horizon.Here is a slightly more aggressive mapping:level_mapping=5,6,7,8,9,10,13,13,13,14,15,16,17would be a bit foolish though to try this (long loading times and excessive data transfer volume)level_mapping=13,13,13,13,13,13,13,13,13,14,15,16,17

Interesting idea?http://www.mturk.com/mturk/preview?groupId...G21T60&kw=Flash

http://forums.avsim.net/dcboard.php?az=sho..._id=32609&page=http://mywebpages.comcast.net/geofa/pages/rxp-pilot.jpgForum Moderatorhttp://geofageofa.spaces.live.com/

I thought I had invented some really new name. Something that one one would ever use... and one that sounded truly awkward. So awkward that really no one would ever consider using such a name. But I was WRONG!Look at this:http://geo.topf.org/tileproxy/index.htmlTileproxy! A totally unrelated project.So... should I rename my project now? ;-)Christian

Recently upgraded from a dual 6600 to a quad Q6600 and dropped the new beta in (with the recommended fsx.cfg file) after uninstalling the previous release.All four cores are now flat stick when I run TP (99% across the board) and I average between 700 and 1000 tiles per second as the flight terrain loads and then about 200 to 300 tiles per second in game (I have a 1.5mb connection) but still, the visuals are quite degraded (with fps unlimited and limited there is no appreciable difference).It is quite strange given the volume of tiles I get - the quality of the terrain textures is far from that which can be seen in the provider's viewing tool. I get some blurries but, ma…

Hi Hope you can helpI cant get beta 6 pre to work I get "rejecting tile wrong metadata version" 1 expecting version 2I have been unable to recreate the great results I got with beta 5.Any explanation gratefully recvdalso any chance of a working tp config. my original was overwritten by the new instal?? I think I missed a check boxRich

Hi Christian!Only a brief question: I'm from Italy and I'd like to fly over my country with satellite images from an italian server, but I don't know how modify TP if It's possible.Server is : www.atlanteitaliano.itSatellite images are with 1,2 mt/pixel, very detailed!Thanks for your replay and good job !Max

Hi all! I have this problem with TP: http://forums.avsim.net/user_files/177234.jpg (this image is taken 30 min after FSX is loaded)FSX without TP going perfect, therefore I must have mistaken something, perhaps ths FSX.CFG... Anyone, please, can help me?Many thanks!!! Maichan

hi all,after finding the right settings for tile reload in fsx and tweaked tp to my needs i now get following error message during loading of the tiles near the center of the aircraft:access_mip_level() for resolution 0 failed on a tile with buffered resolution 512and sometimes the same error for ... buffered resolution 1024the result of that error is that i have a black area around the center of my aircraft position wich seems to be as big as the LOD Distance setting in the ProxyUser.iniThe error remained after cleaning up all cached data from the folders.may some of you have a idea whats going wrong or what this error stands for as i could not find anything about that i…

Christian Hello,I have suffered a major system failure and have had to reinstall XP.As a consequence I have lost everything.However am now back up and running and am getting everything back to normal.Would you please be kind enough to post the FSX cfg file that you have posted before. I cannot find it.Many ThanksRegardsRichard

Hi,New problem with tileproxy :-( After I exit FS2004, the program tries to reconnect with FS2004, so I go to "unload.bat" and I get these errors:detach failed with error: 0x801f0010Do not detach the filter from the volume atUnload failed with error: 0x801f0010Do not detach the filter from the volume atPress any key to continue . . .All the best,Andy

Hi all,Just installed this great program to use in FS9 and I edited the http link to use g**gle *arth's images but all I see is water everywhere in fs. Has anyone had this problem? Could this be because I checked that I have FSX SP1, even though I will be using this for FS9?Thanks all.Andy