The FS2004 (FS9) Forum

The title says it all. When ever I go to map view or Try to re size the gps mapit causes Fs9 to crash. I have tried a complete reinstal and it still causes same problem. Never had this problem since I bought game in 2003.Any help here would be welcome. Thanks Steve

How do you fly a straight in visual or vor approach in the b737. I am at about 150 knots and at 3000ft and 30 degrees flaps.when I go to put the autopilot on and click the nav button,the aircraft veers to the left or right.how do I land this aircraft regards Peter Duncan.

Well, I'm one of the first costumers for this product and must give to all community a warning message, because this modules that include this program are not compatibles for FS2004, when you install it and try to start FS9 there is a message to advise that the modules are not loaded. http://secure.simmarket.com/ofx-simulation-ai-traffic-boosted-technology-fsxfs2004-(es_8451).phtml I send a mail in morning for the fix, and I get silent from the developer 'till now :unsure: . I don't know OFX, there products get a good support? Just time'll say. stay I'll in contact. Mario

When I push the start button of the video in the GETTING STATED, fs9 is broken. And a button come out with the text of Microsoft Flight Simulator has stop working , under this is that a problem come out to result in program which can't work normally.Why this happen? Thanks for your help! Best Regards!

Just a small little message in their forum but the addon is great!Go get it:http://www.fs-proteam.com/products.html?op=one&id=16&pw_patt=cataloghttp://www.fs-proteam.com/files/screen_shots/VC8_1000.jpgRob "Holland&Holland" de Vries http://kewlceo.com/forums/style_emoticons/...crazy_pilot.gif"To go up, pull the stick back. To go down, pull the stick back harder"

I recently purchased the Eaglesoft Beechjet 400 and the CJ1 (not the +2.0) after having been satisfied with my Citation II aircraft from them. But, I am having an annoying problem. My FS9 keeps freezing up when using them and it usually happens when I click on a button or switch in the aircraft, sometimes its the sim icons buttons, the autopilot controls or the FMC. It only happens in these two aircraft. It does not happen with the Eaglesoft Citation II or with any other of my addon aircraft. I am running Windows 7 64 bit with FS9 installed outside of the program files folder. I have tried sending support a support email to Eaglesoft but have not gotten a reply.

Think it was Harald that mentioned in the screenshots thread, that these models were cheap at the Nemeth site. Indeed they were, so I picked up the remaining FS9 models I didn't have. I can't find any differences between pay-and freeware Eurocopters! Anybody know any different?

I haven't flown FS9 for about 4 years now, but decided of late to re-install it and see what it looked like after seeing the beautiful screen shots on that forum. I'm not worried about how it will run as FSX performs just fine on my rig. That post's topic was "FS9 9.5 never looked so good". I'd just like to know if there is a list or menu of what addons are being used to achieve those results. This is what I currently have installed for texture enhancements: FS9 9.1 FS Genesis World Mesh UTUSA, Canada, & Europe GE PRO II REX ASv6 ZInertek Ultimate Water Advanced Anything else I should consider? I do see fuzzy terrain of flat land I'd say from about 10 mi…

I recently uninstalled and reinstalled FSX because of start up issues. I use FS9 on 95% of my flights. My problem is that when I reinstalled FSX now when you click on the help button at the top of the menu bar in FS9, it says registry error. I have run the registry repair tool from Flight1, but that doesn't seem to help. I have my FS9 updated to 9.1 and use the no cd .EXE. I would hate to have to reinstall FS9 and all of my add ons. It doesn't seem to affect anything involved with running FS9 or installing additional payware, but just bugs me that it is not 100% correct.

I recently got the Eaglesoft Citation II for FS9 and everytime I try to take off I get the master caution alarm. I have everything set as per the manual, Flaps are at 15 degrees, Trim is between 5 and 7.5 degrees, anti-skid is on, and the brake is off but I still get the alarm. Is it something I am forgetting?

For those of you (and yet to come) who fly David Maltby's Super VC10 have a look at this video and see how to fly it!! http://www.youtube.com/watch?v=94xXG5EC6d0

Hey everyone, just visited a friend and he seems to be having a problem with the Water on his sim. This seems to be happening everywhere we go Canada and different parts of the US pretty much globally Its really strange ive never seen it before. When he lands on water on an Amphibian plain theirs no water effects (Waiter effect slider is to the max) Also when Moving in the water you can here a rolling Effect instead of the Splash effect sound that you'd normally hear when navigating in the water but the aircraft has no wheels? I did check the sound folder and the sound effect is there along with the water trails texture and effects within the effects folder. We tried …

Nothing Against FSX but i tend to search for FS2004 Addons almost Every Single Day and frankly i get FSX Search Results in the Mix (This can be quite annoying considering im all about FS9) Once again This is just a tip to help us FS9'rs get Search results on Google for FS9 and FS9 only. If you wish to make it easier to find FS9 search Results simply add this to your search -FSX For example if your looking for Bush scenery (as i was today) and wish to filter FSX results from showing up in google simply type the following below in the Google search bar FS2004 Bush Scenery -FSX (Be sure to put a space between whatever your searching for and the -fsx This is…

Hi everybody, does anybody know how I get head movements also in the ifly 737 with active Camera. I bought active Camera and in all aircrafts active Camera simulated the head movement; but in the VC of the ifly 737 aren'T movements. Does anybody made the same experiences?

Hey guys i have been experiencing a problem with a Specific Airport LSZS heres the issue 1.All seasons work fine for LSZS accept Spring, a. Summer Works (Day and Night) b. Fall works (Day and Night) c. Winter Works (Day and Night) d Spring does not work always crashing in with a Stack Hash CTD. I'm pretty meticulous when it comes to my Simulator this is what confuses me. From various test i realized that the crash only occurs in LSZS or when im nearing this airport during the Spring season. Spring works perfectly fine for all other surrounding airports in this area payware and Default. I do have payware Airports in the Area Small Switzerland Airfie…

I have Maldives X and it is only for FSX. Is there any Maldives scenery for FS2004? My FSX Rudder Centre Function Does not work and FSX does need high graphics... So don't play it..

Did anyone try the Natural Tree Environment FS2004 by Zinertek? Are the trees sized realisticly? Or are they oversized like the default trees? Thanks, Henning

Hi Good People, Recently I discovered by chance that a volume of some of the best Ford Tri-Motor Project products had been poached from either the big sites (that we authorised to distribute some components of the Ford Stuff) or from the Ford Site itself and was being illegally distributed by an unauthorised web site. I will not give this "suck and publish" site the advantage of FREE advertisement and traffic by naming the site - suffice to say that they have been made aware of the consequence of their illegal publications and have promptly removed all of the unauthorised Ford Project related product from their site. Edward and I carefully monitor the "download" number…

Hi, I only discovered this FMC today, but having downloaded the NavData, I got it installed into my PA a380 cockpit with no problem. So I thought that I would try it in some other Airbuses - the CLS a330-200 to start with. I wonder if I am making a stupid error somewhere; the FMC shows, but it's switched off and I can't get it to light up. I have added the same panel entry as I made in the a380 panel.cfg: [Window06] size_mm=377,600 visible=1 ident=10014 window_pos=8 gauge00=vasfmcgau!mcdu, 0,0,377,600 and I have copied the four vasFMC folders _acs, _lgip, _rmp & _sys into the CLS panel folder. But the CDU is dark. I tried with the SGA a300: same r…

Hey! I have a older BN2 flying as an AI in my FS9 system ( bn2-a_fea.zip ). I have 3 textures for the same aircraft, all 3 of them are old Sabena Textures ( sn_bn2.zip ). One of the 3 aircraft disappears after each landing, even on the same airport where the 2 other aicraft make a normal landing and taxi to the parking spot. I've checked out all characteristics possibel, and everything looks the same to me, whereas though that one aircraft every time again disappears immediately after landing when the brakes seem to make the aircraft stop completely still on the runway... Strange!... Note that I perpared a special parking spot for the BN2 with correct diameter and cor…

HI all! I am about to do a bootcamp to my 2013 iMac and they will only allow me to put windows 8.1 on it and was wondering if i would be able to put my FS9 on it. I heard many people in forums saying this will not be possible but i really hope this isnt the case as i love this sim and have £100s of addons for it! Please let me know!!!!!!! Cheers

Posted in FSX but for the benefit of our FS9 users: AES V 2.35 is now released. I know some were waiting for new airports!

How do you use the GPS switch to run a track line in the Piper Cheyenne. Nothing happens when I click the switch. I think I remember the radio has to be tuned to a certain freq, but I'm not sure.

Hi When flying over or near to Vienna (LOWW) I constantly receive this green bar telling me the weather. Can this be removed? It does not happen at any other airport. Thanks, J

Just a heads up for those owners who haven't checked the Flight One iFly forum website recently. Worthwhile refinements and a (stunning) new feature awaits.