Crash To Desktop (CTD) Forum

Hi, I've been having some serious difficulties making ReShade work with P3D 3.2.For some weird reason, when ReShade is enabled, it causes an insta CTD when loading programs like Active Sky 2016, vPilot and TrackIR (all of which utilizes simconnect). If I disable Reshade, all addons load perfectly fine, and the sim works normally. My usual procedure is to load up the sim with the given scenario THEN start vPilot, AS2016, TrackIR and so on. However, if I start AS2016 during the load screen, it connects normally to the sim and loads weather. This does not work for vPilot though. TrackIR needs to be started in-game, or else it messes up EZdok. The event manage…

Ever since I re-installed my PMDG 777 onto my FSX:SE, I've gotten crashes with the file causing it being weather.dll. I've read all the previous topics about this, deleted every single .WX file on my PC, and deleted the fsx.cfg in order to get a new one. I even uninstalled the PMDG 777 and re installed it. The only way I can fly is with the settings being on clear skies, but I want to do some real life weather, as clear skies is starting to bore me (you can understand, right?) The game has a fatal error and CTD a few seconds into the game, no matter what aircraft of where I am, or even what weather type, as long as it is not the clear skies setting. I don't want to u…

I was doing a flight from LOWW/KMEM PMDG777F Left flight to fly overnight. Got up this morning and I was 400 miles away from KMEM. I had to go to work so I put the SIM on PAUSE. Came home and un-paused the sim and started clicking away to set up for landing and clicked the center fuel shutoff switches and got the below error. I had this happen the other day on a flight I pause for more than 8 hours when I depressed the LSK button. Could this be a result of just a long pause? Report is from APPCrashview. Thanks Randy Version=1 EventType=APPCRASH EventTime=131153373060094071 ReportType=2 Consent=1 UploadTime=131153373062331693 ReportIdentifier=81f1bab…

After hundreds and hundreds of posts in this thread: http://forum.avsim.n...179-gd3dllhelp/ Pete Dowson incl. the help of many, has found a solution (or better said "crash prevention") for some g3d.dll errors/crashes many are experiencing. The common sceneries causing this are Aerosoft EBBR, EDDF, ESSA, LOWI and generally ORBX area. It has been confirmed by already couple of persons that the crashes don't any more occur. Even hard test-configurations where users were having certain crashes have passed. If there are any drawbacks, they are yet unknown. The solution is implemented in his FSUIPC. Important: this might not be the solution for every g3d…

Hi there, My last succesful flight was 3 months ago. FSX ALWAYS crashes. I think it is because i'm using dozens of add-ons. I have managed to solve all my dll errors by deleting ALL the uiautomationcore.dll files (both in fsx and windows directories). But i still get an error (AppHangB1) everytime I am flying the PMDG 777, from Athens to Dubai, in the middle of the flight. I have made 3 attempts, both ended up screaming in front of my screen. Please I need your help or I will move to XPlane or P3D. Hardware Intel core I5 4460 @ 3.2 Ghz GTX 960 2GB OC 8GB RAM 1TB HDD H81M MOBO Software Windows 7 x64 MS FSX Gold Edition Add-ons Traffic X FSUIPC REX Pl…

Hi again, One thing was solved but now I've got another problem that happened to me also in Win7. At the end of a pretty short flight from Malmoe, Sweden to Berlin the immagine freezes short before landing. I have tried it twice and it happen more or less at the same place. Readig what to do in your CTD guide" I downloaded "Process Monitor" and it seems to consist of 3 folders but when I try opening the manual I can see the headings but nothing happen when I'm clicking them. It seems as the manual is empty. If anyone has experience of it, please describe to me in steps what I've got to do to get something to send to this site. The program records everything from the mom…

I did a seach on this problem, but most of the responses were so old, the links to the solutions have all expired. I am running the Gold boxed edition of FSX, on Windows 10 Home Edition. My system incudes Intel i7-4930K, 64.0 GB, and a GTX 780. I have no add on scenery.​Today I tried to take a ​flight from the Tampa area to the Miami area in the stock, in game 172. About one third of the way the game just froze. I could still hear the sounds and the prop seemed to be spinning, ​but the plane stopped moving, and while I could move the mouse cursor, I could not get anything to click. I had to cntrl-alt-del to get out ​of the game. I tried a second time, and this ti…

Crashed during Tutorial #1. Help is appreciated! Version=1 EventType=APPCRASH EventTime=131147126793039509 ReportType=2 Consent=1 UploadTime=131147126793845156 ReportIdentifier=2f720a27-5991-11e6-9c24-5cf3706c76e0 IntegratorReportIdentifier=2f720a26-5991-11e6-9c24-5cf3706c76e0 WOW64=1 Response.BucketId=b43b9732c25f0b4ec230515cdd2d058b Response.BucketTable=1 Response.LegacyBucketId=73972774347 Response.type=4 Sig[0].Name=Application Name Sig[0].Value=fsx.exe Sig[1].Name=Application Version Sig[1].Value=10.0.61637.0 Sig[2].Name=Application Timestamp Sig[2].Value=46fadb14 Sig[3].Name=Fault Module Name Sig[3].Value=PMDG_737NGX.DLL Sig[4].Name=Fault…

Is this related to anything ? Faulting application name: Prepar3D.exe, version: 3.3.5.17625, time stamp: 0x5758bb31 Faulting module name: ntdll.dll, version: 10.0.10586.306, time stamp: 0x571afb7f Exception code: 0xc0000374 Fault offset: 0x000dc7c9 Faulting process ID: 0x2e1c Faulting application start time: 0x01d1eca7f8f8761a Faulting application path: C:\P3D\Prepar3D.exe Faulting module path: C:\Windows\SYSTEM32\ntdll.dll Report ID: 2806f75a-dbac-47e3-ade5-d0e91adacce0 Faulting package full name: Faulting package-relative application ID: Thanks

Good evening people, The problem is that my P3D V3.3.5 dosen´t start because a notification appears, saying that my computer has run out of memory so that I have to restart the sim. I already try deleting the shaders, re-installing the client and nothing... MY PC: AMD 6300FX NVDIA GEFORCE 970 GTX 12RAM 1TB (70GB FREE) HELP !

So today I was flying from Denver to SFO in the NGX. I had just installed P3D v3 over the weekend along with FTX Norcal. I was flying from Flightbeam's Denver to Flightbeam's SFO. At FL300 directly over the Yosemite valley, I experienced a CTD. Back when I had FSX, I used the uiautomationcore.dll file. Do you need this in P3D v3 as well? Also, is there a way for me to find out what caused P3D to crash? I've noticed when other people experience a CTD, they post an error log. How do I find this? The only option I was presented with was an option to close the program now. That's also why I didn't post this into the FTX support forum or over at the PMDG forum. I d…

I recently upgraded from Win7 to Win10 and most things in FSX Deluxe seem to be working OK. The two issues I'm having are warnings about low memory (never had that before, physical memory is 16GB), and if I try to switch a/c using the drop down menu when in the FSX window mode I get a CTD every time. Thanks for any ideas or suggestions, Al

About 5.0 hours in to a KSEA EHAM flight with the PMDG 777 I had a CTD and got the following error. What does this mean. Faulting application name: Prepar3D.exe, version: 3.3.5.17625, time stamp: 0x5758bb31 Faulting module name: gdiplus.dll, version: 10.0.10586.494, time stamp: 0x5775e253 Exception code: 0xc0000005 Fault offset: 0x0006d60d Faulting process id: 0x11d0 Faulting application start time: 0x01d1e8605d165205 Faulting application path: C:\Lockheed Martin\Prepar3D.exe Faulting module path: C:\WINDOWS\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.10586.494_none_1b70da0b144cd419\gdiplus.dll Report Id: 30b50b48-03bd-45a0-928e-9fbb29b4065d Faulting…

Btw way I can not control the formating of these quotes very well. Just Trying to return a new paragraph in the right place isn't working. I will try an type in this space. I can not type before or after the quotes. Hence why it is in the middle. P3D 3.2.316769, crashes later on in the flight, and tonight it crashed on final or what was a very good flight. I have tried to find the errors and these are the only ones i could find. I don't know what it all means but, any advice would be appreciated. Best regards Jools

Hi folks Not sure if this is the right forum, and if not maybe someone can direct me. I recently wiped the HD and started a complete re-install in W7 for FSX. I don't have all of the aircraft yet installed, but have most of the scenery object: ORBX, and several payware airports. Problem I am experiencing on about every 3rd flight is a complete 'windows dump" where the computer freezes and I have to shut it down. Just tried the same flight twice, and same thing happened when i attempted to adjust alt with Saitek. However it happens also without touching any control, sometimes in a cruise setting, no inputs of any kind, and suddenly i get the windows dump. Can a…

Hello all, I have used the payware version of FSopen Clouds for some years. Of late it is causing P3D 3.2.3 to CTD when an airport anywhere North of Hamberg and East of Berlin is selected. Elsewhere in the world it works as expected (i.e. Wesern Europe and Alaska). I have installed AoN and SWD scenery for Scandinavia but the CTD's happen with or without scenery activation. I have emailed Dave Wave twice and posted to the FSopen forum which despite previewing and being submitted OK is not showing in the forum. Has FSopen stopped trading? Anybody have an handle on why Scandinavia area causing a CTD. Any information gratefully received. Thanks and regards…

Not sure, but this has started to happen out of the blue, everything was working fine, But all of a sudden, when I load the default flight, it goes to the progress bar loading screen, and I see the screen turn completely black with the EZCAM message on the top right. After that it takes me back to desktop without any pop up or anything. The problem seems to go away when I reboot. But I have posted the results of my AppCrashView log Version=1 EventType=APPCRASH EventTime=131131426126159289 ReportType=2 Consent=1 UploadTime=131131426126737628 ReportIdentifier=96c2a5cd-4b49-11e6-a931-dc85de06fb0d IntegratorReportIdentifier=dc8c4bfa-0bdc-4279-a0ff-d750156cfbae WOW64=1 …

Hello Everyone I trying to fly for 2 days from EBBR BRUSSELS NATIONAL to MMUN CANCUN MEXICO With the PMDG 777-200LR. During the descent to MMUN I get a crash to desktop with no error ? I get very frustrated. flying 20 hours for nothing my system Windows 7 Home Intel I7 [email protected] Asrock Fatality Z97X Killer AMD Radeon R9 280X 16 GB kingston HyperX SSD120GB for windows SSD250GB for Prepar3D 1TB HDD for program's and data My addons GSX PMDG 737 and 777 FS2CREW for 737 and 777 Orbx base, Vector, OpenLC Europe ASN EZCA FSpassengers My trafic Pro 2016 Pro-Atc/x Raas pro Aerosoft Mega airports: Brussels, Rome, Nice, Barcelona and Antalya …

Today my machine started crashing (After Mytraffic Professional install) when trying to change traffic slider: crash EventType=APPCRASH EventTime=131142085477676987 ReportType=2 Consent=1 UploadTime=131142085478393829 ReportIdentifier=698ad4c4-54fb-11e6-9be0-4ccc6a093755 IntegratorReportIdentifier=d5fdba3f-772a-44aa-b360-cdc125cb8eb1 WOW64=1 NsAppName=Prepar3D.exe Response.BucketId=0c71f50e0db054a7bd4eefdecb2fb1a3 Response.BucketTable=1 Response.LegacyBucketId=108311050176 Response.type=4 Sig[0].Name=Naam van de toepassing Sig[0].Value=Prepar3D.exe Sig[1].Name=Versie van toepassing Sig[1].Value=3.3.5.17625 Sig[2].Name=Tijdstempel van toepassing Sig[2].Value=5758bb…

Did a trial flight with Majestic Dash 8 KPSP-KSEA. All sliders to the right, except shadows. Full ORBX package with default ORBX KSEA, and ASN16+Clouds.. P3D crashed on 5 mile final over Seattle scenery. Obviously 8 gigs of video memory not enough

hello everybody first of all sorry for bad english i have got more than 10 fatal error ctd with g2d.dll i have replaced uiautimationcore.dll i made a clean install of fsx with those add ons only (fspassngers - pmdg 737 - pmdg 777 - airbus extended ) and fsx fiber accelrator, no any scenery add ons i am now running fsx with the lowest settings ever specs core i5 4200u raedon r7 m250 2gb 4gb ddr3l ram event viewer Log Name: Application Source: Application Error Date: 28/07/2016 02:58:43 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N / A Computer: Ahmed Description: Name of the application that contains errors: fsx.e…

mine issues where short lived.. Once again on the flight that haunts me... CYVR to EGLL . always that flight. Heres the log. Jim your ideas ? - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name=".NET Runtime" /> <EventID Qualifiers="0">1026</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2016-07-27T05:35:28.393669500Z" /> <EventRecordID>8135</EventRecordID> <Channel>Application</Channel> <Computer>DESKTOP-CDP6ROF</Compu…

Hi all, I have recently tried my first flight with 737 ngx in FSX but when I try to end flight, instead to ending it, the fsx crashes and restarts. The faulting module is pmdg737.dll I tried to search solution online and tried a few things with controllers. But it did not help. However, when I turn on Preview DX10, the crash does not occur then. With DX10 when I "end flight", the FSX just shuts down completely, instead of taking me to the "Free Flight" page which it normally should. But at least the crash error does not show and fsx does not restart due to crash. The problem is when I have DX10 activated, it makes all my addon airports messy, extre…

I am also getting g2d.dll errors midflight. I highly doubt it's hardware issue because my temperatures and voltages are very stable, and all other games work fine. I've noticed if I'm a bit too cavalier changing EZDOK views, I can crash the sim running PMDG 737 NGX with the above mentioned error. Anywho, I hope somebody finds the fix.

I need help, my fsx has been crashing it does not say stopped responding it just freezes and stops and my pc doesnt even detect it. i got this message from the event log Log Name: System Source: Microsoft-Windows-DistributedCOM Date: 7/2/2016 7:15:52 PM Event ID: 10016 Task Category: None Level: Error Keywords: Classic User: SYSTEM Computer: DESKTOP-84NOOHT Description: The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {D63B10C5-BB46-4990-A94F-E40B9D520160} and APPID {9CA88EE3-ACB7-47C8-AFC4-AB702511C276} to the user NT AUTHORITY\SYSTE…