Crash To Desktop (CTD) Forum

Well now FSX Acceleration I get it up for a couple of minutes and then it crashes, closes down Error message from the event viewer says the following: aulty application path G:\FSX\fsx.exe and faulty module path unknown. When it loaded up after the repair I did say trusted fs Dreamteam plus I have the newest addon manager. So what does this sound like ?

been simming for many years and this never ever happeneded. I am running on windows 7 FSX Gold Edition, I clicked on the icon on the desktop running as administrator and then out of no where I get the message, Microsoft Flight Simulator has stropped working correctly.. I was flying yesterday with no problems I tried a system restore that did not help, need suugestions , Please, Please. Just to let you folks know I did no changes to the computer either. Thanks, Ronny

Hi, It has been a long time since I had major Fatal Error issues. (Sometimes I will get them on long flights overseas) but now I get them just a few minutes after loading FSX. It all started when FS Dream Team came up with an update download for GSX for June 2016, which I did, and it caused GSX vehicles to disappear, or cause UT2 to disappear in flight . I sent posts to FSDT about the problem and they say it could be a Simconnect issue because of the 3rd party add ons. I have UT2, ASN, FSDT airports, and FSpassangers. I never had these issues before with GSX updates, but until the June 2016 update. But as of today, I get constant fatal errors minutes after loading an a…

I am hoping this is in the right forum... With the exception of my GPU which is not so bad (9800gtx+), my system is pretty solid for fsx: i7 4790k@4ghz, Win 7 pro with 32 gigs of ram. So what happens is that if I start a flight and access any of the menu bar items up top, very early in the flight, I am able to navigate through whatever and get back to the flight. But after a few minutes I try this, it will always open the menu item but will not go to any other levels of choices or even let you cancel. All that happens is the icon you click on animates like it is supposed to - then nothing happens. I have to bring up the task manager to quit the software. Fs…

For almost a year, I have been running FSX in windows 10 with very few problems. Now I am lucky to get FSX to stay running maybe once or twice out of a dozen starts. Nothing has changed in my system except for NVIDA driver updates (GTX 980) and the automatic Microsoft updates. I have zero add-ons and run default aircraft. Have added the MS FSX SP1 and 2. FSX runs on it's own SSD as it always has. Have reloaded FSX several times with no fix to the problem. Even tried running FSX on the C drive and still the same results. The computer is a I 7 4790 @ 3.6 GHZ, 16 MB ram, GTX 980, Win 10 Pro 64, Ver 1511, build 10586.420. Again the FSX use to run just fine up u…

Hi all, i've been getting this error every time 5-6 secs after loading up an aircraft. this started happening 2nd time after i started using free weather engine FSXWX. (http://www.plane-pics.de/fsxwx/home.htm) i tried deleting my .wx files in my Documents/Flight Simulator X FIles and also in %appdata% where my fsx.cfg is located but none of it worked. Problem Event Name: APPCRASH Application Name: fsx.exe Application Version: 10.0.61637.0 Application Timestamp: 46fadb14 Fault Module Name: weather.dll Fault Module Version: 10.0.61637.0 Fault Module Timestamp: 46fadb59 Exception Code: c0000005 Exception Offset: 0001542f OS Version: 6.1.7601.…

Hi there, yesterday I had a new crash after a flight between LFML and LEIB, at LEIB's apron. Here's the Appcrashview log. Version=1 EventType=APPCRASH EventTime=131107574042780497 ReportType=2 Consent=1 UploadTime=131107574044322210 ReportIdentifier=17b5e4de-3598-11e6-83cb-94de80ab270e IntegratorReportIdentifier=c373266d-ab75-4197-b77a-f0183de44537 WOW64=1 NsAppName=Prepar3D.exe Response.BucketId=4e5442175f1bb2f4fcd23f61bac65edb Response.BucketTable=1 Response.LegacyBucketId=108234416360 Response.type=4 Sig[0].Name=Nombre de la aplicación Sig[0].Value=Prepar3D.exe Sig[1].Name=Versión de la aplicación Sig[1].Value=3.3.5.17625 Sig[2].Name=Marca de tiempo de la aplicaci…

I start getting your computer is running out of memory,which I know it is not any way Took out windows 10 put it back in every thing is running great and pass all the test only thing came up was my video card could not run and Primary surface test.So I went out got and new card ran the test same thing.So I try to put in FSX and got the same error Data error cyclic redundancy check.So I replaced it with my old video card.The only thing I found on all my drives they are set up to run by "Authenticated users " ??? I switch to systems and go back and back on authenticated users??? After all this my problem is that error Data error cyclic redundancy check can not get their c…

First I want to test PMDG advice, as i have experienced crash during 10 hours flight ( PMDG 777 P3D 3.2 )

Hello all Out of the blue FSX start crashing after 5-6 min , I checked the Admin event log and found this: Faulting module name msvcrt.dll .. Have no clue what does it mean, and if this is the reason at all ant idea ??? Thanks in advance Yair

Hello Im getting lock screens on a brand new installation of windows. heres the details. im quite sure a driver issue, heres the logs. https://drive.google.com/open?id=0B-EYh6oNQ1XBSmRuOG9HRW1kaTQ Many thanks as always ================================================== Dump File : 061216-16468-01.dmp Crash Time : 12/06/2016 15:36:50 Bug Check String : SYSTEM_THREAD_EXCEPTION_NOT_HANDLED Bug Check Code : 0x1000007e Parameter 1 : ffffffff`c0000005 Parameter 2 : fffff800`93aac129 Parameter 3 : ffffd000`269a6628 Parameter 4 : ffffd000`269a5e40 Caused By Driver : ntoskrnl.exe Caused By Address : ntoskrnl.exe+2311…

Shalom and greetings all my pals, I am wondering if any of you have used Sysmon 4.0 software to spot what causes FSX freezes or crashes. I downloaded Sysmon 4.0 and it gave me two softwares. Sysmon and Sysmom64. I tried to install the former and then the latter but nothing happened and either of two refused to install or refused to work. I must be doing something wrong. Yes I used administrator's right to do that. Anybody know? The software did not come with installation instructions. I am using Windows 7 Pro and FSX Deluxe with SP1 and SP2. Thanks Aharon

I just had a crash doing LOWW EDDF Using: Aerosoft A320 REX4 ASN Beta 6004 FTX openLC Europe FTX Vector FTX Global Aerosoft Mega Frankfurt V2 FlyTampa Vienna Ezok xacars FSUIPC IVAP Everything is updated and I'm using a GTX Titan X, so 12gb of vram, it's not an issue even for shadow of mordor running at 8k! My settings are set to 2048res on P3D and REX, density is set to dense (all of them). So it's very disappointing when you see representatives of LM P3D v3 saying they testes everything maxed out +150 add-on etc and you go to real usage and it crashes like FSX did. Sure, if you're loading just one airport isolated, pre tested and not an u…

Several times now so it is not a once off. If I crash my plane, P3D goes and CTD's on me almost immediately almost every time. The error I see is: Problem Event Name: APPCRASH Application Name: Prepar3D.exe Fault Module: StackHash_5351 Any ideas on how to deal with this one? P3D has only ever crashed when I crash an aircraft. Otherwise I can fly for hours without issue so it must be related to the crash itself? Not limited to only one aircraft either. Thanks!

BEFORE YOU SAY DOWNLOAD UIAUTOMATIONCORE.DLL, I ALREADY DID THAT!! But basically, I installed my Aerosoft Airbus's and then booted FSX. Worked fine. Then today I come on and ui.dll has made FSX crash. Heres what the event handler said: "Faulting application name: fsx.exe, version: 10.0.62615.0, time stamp: 0x559f9a9a Faulting module name: ui.dll, version: 10.0.62615.0, time stamp: 0x559f9ab4 Exception code: 0xc0000005 Fault offset: 0x000484fb Faulting process id: 0x1010 Faulting application start time: 0x01d1c04263b6357a Faulting application path: D:\Flight Sim\steamapps\common\FSX\fsx.exe Faulting module path: D:\Flight Sim\steamapps\common\FSX\ui.dll Report…

Hi guys, I upgraded to 3.2 and I get CTDs in every flight. P3D simply stops working. Today I got this fault in Eventviewer: Faulting application name: Prepar3D.exe, version: 3.2.3.16769, time stamp: 0x56df48ce Faulting module name: KERNELBASE.dll, version: 10.0.10586.306, time stamp: 0x571afb9a Exception code: 0xc0020001 Fault offset: 0x000bdae8 Faulting process id: 0xfa8 Faulting application start time: 0x01d1b8aa396c1e40 Faulting application path: C:\Prepar3Dv3\Prepar3D.exe Faulting module path: C:\WINDOWS\SYSTEM32\KERNELBASE.dll Report Id: dc45a192-bda9-4dd2-883d-9831d0781d61 Faulting package full name: Faulting package-relative application ID: Anyon…

hello.. no explanation needed really.... im tired of putting these on the pmdg section. finals into VHHH right click on screen choose wing view... get ctd. heres the logs. I only ever get ctds using the 777 nothing else. - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2016-06-07T21:07:32.646435000Z" /> <EventRecordID>3389</EventRecordID> <…

I posted this on flightsim forum so I'll copy and paste it here. I might also need some help here. I tried not to post on forums as possible because there's so many threads that might be the same crash as mine but I finally gave up lol. I read all the possible fix including AVSIM CTD Guide but I believe every system is different. So I was planned to fly a 3 hour flight with the Airbus A320 Sharklet. During climb(28 minutes after activating the Chrono). suddenly the sim freezes and it stopped responding(window popup) and that force me to end the application and resulted a crash. Here's the details from the Appcrash Viewer. I also included my current FSX.cfg below too. …

Hello, I tried this figure out on my home forum, P3D forum, but nowhere no effective help yet. I am new user of Prepar3D, changing from FSX. And sorry for my english. Three days ago I installed Windows 10 on new SSD HDD, check or install drivers for HW and then the first application I installed was Prepar3D v3.3 (last version I could download). After install I start the sim and hit OK in the menu. I just wanted to look how it looks. No addons. Then loading started, and when the status bar reach 100%, the program froze there a little while and then crash. No message, no problem, just dissapeared. So I tried for at least 5 times, everytime the same situation. So I was che…

Loading Scenery Objects gets to 100% and then crashes. I just flew a flight last night, and everything went well. I wake up this morning, and my P3D started doing this. My username has no special characters in it "Brandons" I have tried deleting my CFG as well as the .fxml file and the .wx file in Local/Lockheed Martin/Prepar 3D v3. Keep in mind I have not installed anything since my last flight that's why this is weird. Any help would be very much appreciated. Here is my crash report: Version=1 EventType=APPCRASH EventTime=131096257152074093 ReportType=2 Consent=1 UploadTime=131096257152644742 ReportIdentifier=2c93b977-2b4d-11e6-9c15-001374000000 IntegratorReportIdentif…

I'm having a similar issues. My flights are much shorter. KEWR-KMIA, KATL-KMIA... Always on final. Never a entry in the Event Viewer. P3D just closes itself as if I told it to.

Hi all, Long-time lurker, second-time poster. For the past year or so, I've been having regular CTDs of my FSX-SE install, usually fatal errors, and most often citing NTDLL.DLL as the faulty module (others, though not as frequent, have included terrain.dll, g3d.dll, etc.). I've been able to resolve them on specific recurring flights (e.g., where the crash would happen at a certain point on the same flight and the same aircraft) through various means, including (but not limited to): Switching from FSX to FSX-SE; Deleting my fsx.cfg, rewriting it and then changing certain key settings (e.g., display, wideview, and others) back to where they were, but leaving everyth…

I have an error code title: XACT Audio Init Failed has error code of 0x88890017 have any ideas how to fix?

Hello, I have : UT2 Europe, Orbx England, EGLL, EGSS, EGKK, EGCC, EGLC from UK 2000, GE P3D world installed. I tried a flight EDDF to KIAD this morning,using PMDG 777, my VAS was about 2 Go, and suddenly, OOM some miles NW of London. Has some body allready got an OOM like that? I suppose it's a problem with a scenery... Any idea??? Thank's and best regards Yves

I have just discovered that my FSX has a weird problem that when I am flying over land, it is fine but when I am flying over large body of water such as English Channel or Caribbean sea or Pacific Ocean or water body between New Zealand and Australia or Lake Ontario, my FSX has hangup freeze crash. It seems that FSX has some kind of fetish problem with water. Yes I used CDs' repair option to fix it but no luck. Anybody know how to fix FSX's weird attitude against water? I love to fly around Caribbean and I am not going to allow this problem stop me from enjoying Caribbean flying. Anybody know how to fix it? Thanks, Aharon