Crash To Desktop (CTD) Forum

I also have this problem: DXGI_ERROR_DEVICE_HUNG But for me, it's when I launch a scenery such as T2G Paris CDG, LTBA, Flytampa Amsterdam. And it depends of the kind of airplane I fly with (QW 787,PMDG 777 or Carenado 390...) But the strangest thing is that sometimes, (rarely) it works fine and I can fly during 3 hours. I thought my problem comes from my graphic card but i've a GTX 1050 with the latest graphic driver. So did anyone has one solution for me ? That's make 1 month I didn't made any long haul flight :'(

Due to lots of problems with P3D v4.4, I am asking if it is possible to uninstall the v4.4 Client again and re-install???

After i exit P3D and everything closes down about 5 seconds later i get the P3D has stopped working Even viewer shows Kernellbase.dll

For the first time in flight simulating for 7 years, I have twice received an "Out of Memory" in FSX upon final approach or landing with either a PMDG 737 or 777 at FSDT add airports and on short flights that are either 2 or 3 hours. I have been using these aircraft for several years without OOM occurring and I am puzzled why it started now. Never had OOM with PMDG aircraft, even on 12 hours flights! I have been using Windows 7 with 64 bit operating system. Is there any possibilities why this started now? I am at a loss. I have not changed anything on my computer. It seems to have started when I updated FSDT GSX with their updates they send. Cfoley

Howdy, I am wondering if someone can help me out. I have an issue with FSX Steam Edition. I have uninstalled it and reinstalled it and when I try to fire fsx up it gives me a message the is as follows " The requested flight file is corrupt or can't be found. Flight Simulator will now try to load the Default flight." and then FSX closes with, no crash report or anything. It just quits. I don't know how to fix this issue. I have uninstalled fsx and reinstalled as before mentioned, and, even went so far as to delete all the fsx files before uninstalling it. My though process was " If I delete all the files and then reinstall fsx it should fix it." Well as you can imagine tha…

Hi All, I want to start this by saying I am genuienly sorry if this wastes anyones time and I am simply being an word not allowed however this sim has drained me at this point and I'm am done looking for what will fix this. So here is the story. Today I decided to make the upgrade from 4.2 to 4.4 using only the client update as I thought it may finally be time. After putting on tomatoshade and all the good new stuff I had access too in 4.4 I decided to start updating my utilities, namely ASP4. I decided I was going to go back to Rex + ASP4 so I uninstalled ASCA and went in to see if ASP4 was working ok. I tried YSSY from FlyTampa (note other airports before th…

Hello. Firstly I say sorry becuse my english is really bad. Some day ago i was bought a new computer which spec is: i5-3570, 8GB ddr3, AMD HD7790 (1GB gddr). When I select the QW 787 in the aircraft selector loading without problems. But when I press Start the flight, the P3D v4.3 crashing without any message. You can read the ContentError Log here ( https://pastebin.com/ejpfAwsJ ) I was tried to reinstall the 787 two times but nothing changed. Can anybody help me what problem couse this? Thanks for your answers and Happy Holidays! :)

Hello, after replacing the AIO liquid cooler in the PC store my system started to reboot randomly without warning (Kernel 41 error) midflight in P3D v4 and sometimes during 3d Mark benchmarks. I have sent the PC back, the store tested it for 24 hours with AIDA 64 and there were no crashes, overheating, etc. They also run my 3D Mark software with no problems. They have also measured the PSU consumption at max load and advised that there was around 300-250 W headroom. After reinstalling the PC home the problem started to reoccur. Things already tried: 1) Replaced pilot, power cable, tried different socket, tired running the PC in my friend's flat to exclude any external pow…

Hello! Today I was flying LJLJ-LFPG and after 1 hour and 20 minutes on FL360 with B737-800 I got this error: https://gyazo.com/576daeb0ed48d269cf8de78bdd3dd49f I already read similar topic on AVSIM but it was about V3.4 not V4.3. I also searched on the internet about this error but I still don't know what is the cause. My GPU had temperature around 55°C when I got this error and I did not overclock my GPU and I have never got this error Is my GPU faulty? Can power outage be the cause? Because today in the morning there was a power outage in entire Ljubljana (this never happened before) and whole city was without electricity for about 3 min. I was…

Shalom and greetings all my pals, After making many flights without problems past 2 months, I suddenly had THREE crashes in single flight making me give up this particular flight from PABR to PASC using CalClassical C-46 plane set in FSX Deluxe with SP1 and SP2. Here is screenshot of the event view for those three same crashes below. Copy of words from event viewer: The program fsx.exe version 10.0.61472.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel. Process ID: 286c Start Time: 01d493265b6fcc81 Terminat…

The program Prepar3D.exe version 4.3.29.25520 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel. Process ID: e64 Start Time: 01d491cd589fccf3 Termination Time: 37 Application Path: J:\Lockheed Martin\Prepar3D v4\Prepar3D.exe Report Id: d828493c-6e3c-498e-9b01-4d3519c0eccf Faulting package full name: Faulting package-relative application ID: So I was flying for like 18 hours and while as soon as I started the descent the P3D hanged. Any fix?

Hi Guys, The Sim just crashed several times. Please see below the events viewer log. Faulting application name: Prepar3D.exe, version: 4.4.16.27077, time stamp: 0x5bfdbb35 Faulting module name: ntdll.dll, version: 10.0.18298.1000, time stamp: 0x0c2c31de Exception code: 0xc0000374 Fault offset: 0x00000000000f85d9 Faulting process ID: 0x3288 Faulting application start time: 0x01d491ff0fe070a2 Faulting application path: C:\Program Files\Lockheed Martin\Prepar3D v4\Prepar3D.exe Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll Report ID: edeb0caa-4e7a-4e2f-bc2f-0d952e1c3e73 Faulting package full name: Faulting package-relative application…

Hello, P3d v4 keeps crashing every 30sexonds to one minute now. It's been happening ever dice I re downloaded fsx onto my pc 3weeks ago. my specs are I5-7400 8gb ram gtx 1050ti 500gb storage 64bit im running windows 10, I get no error message apart from not responding at the top when it crashes. It is fully up to date my op. Could it be a lack of ram?

Hi, Not sure how to present this in order to get a few hints on how to fix this. I have upgraded P3D from 4.3 to 4.4 and now I find that some addon airports are causing constant CTD. Namely FT Boston rebooted, I have FT Cyyz and Kbuf and they work OK. Orbx LEBB Aerosoft EDDS I would load the flight and hear the engine (prop) and right away CTD. No event logs. These were all working fine in P3D 4.3. Checked websites and no reports of problems in V4.4 Not sure were to go from here. Maybe someone sends me in the right direction. Helmut

Good morning everyone, My FSX often does the same thing, the departure and climb is normal with good FPS ( 10-20 ) then while I am flying the terrain gets more and more blurry and FPS remain the same but I can see evident signs of hashes, and when I start decent, I start having regular background sounds telling the memory you know, FPS are still good but the rest is very annoying, then when I approach airport I often have either the FSX didnt respond message CDT or the FSX run out of memory message, but now I save my flights before approach... that is very annoying and if anyone had very good ways to get rid of this blurry terrain and CDT 2 messag…

Hi All, Anyone know what on earth this is? It happens on start up after sceneries builds and then seems to cause my version 4.3 to crash, but in some sense still to be on because you cant try and restart it as it tells you a version of Prepar3D is running. Again here it is: An error box in which it is said: Hacklib::initContactPointsOffset()-Unsupported Prepar3D Version Ha! Seems like it was caused by FSLabs A320

Hi, my AppCrashView'logs is: TargetAppId=W:0000abbabf4c877ad6b145a2cc9b02b7c3cb00000904!0000d5fc0d7ce97f85830080d86c7b00cc081e7b7730!Prepar3D.exe TargetAppVer=2018//06//21:23:18:59!2d5e49!Prepar3D.exe BootId=4294967295 TargetAsId=340 UserImpactVector=858796848 IsFatal=1 Response.BucketId=49ef80e1b5dcfa695fd778af16bde1f9 Response.BucketTable=4 Response.LegacyBucketId=2294435228564709881 Response.type=4 Sig[0].Name=Application Name Sig[0].Value=Prepar3D.exe Sig[1].Name=Application Version Sig[1].Value=4.3.29.25520 Sig[2].Name=Application Timestamp Sig[2].Value=5b2c3263 Sig[3].Name=Fault Module Name Sig[3].Value=StackHash_b97e S…

Hi Guys I have a new build 737-800 after taking a few years out. Got a top notch pc more than capable to run with 2x RX580 cards. All is working perfectly with the pc and 7 monitors displayed. I have run FSX and undocked a window, everytime I drag the window to screen 5 (Lower Centre) for the Eifes screen, it crashes to desktop. Every other monitor is fine Not sure whats going on, but not getting any error messages or nothing Its Windows 10

Hello everybody. I´m using the P3D 4.3. I have a 8700k and a Gigabyte Z370M AORUS Gaming DDR4 and a EVGA GeForce GTX1080 and yesterday I´ve made an overclock to 5.0 Ghz. If i try to fly with the overclock, i have a CTD after 20-30 minutes, if i fly without the overclock i can finish my flight. But, i realy want to fly using the overclock. Any idea of what do to? Thanks.

Hello guys! recently my P3D decided to CTD (without any error, or log) after selecting airport and hitting the ok button. I have tried a full reinstall, deleting all the folders (AppData, ProgramData...etc) it didn't fix it. P3D is vanilla with no addons installed at all. Frehsly new. I also installed latest drivers, and latest Windows updates. I7 [email protected] Asus GTX 1070 strix oc 16GB ram P3D is on samsung 960 evo m.2 SSD EDIT: fixed by reinstalling and deleting EVERYTTHING

OMG.... what a hot mess. Couldn't install Vancouver without GSX. Couldn't install GSX without SODE. SO, installed SODE, OK. Installed all the FSDT stuff, and P3D just hung at the splash screen Uninstalled all of it, replaced backups using Simstarter, of the dll.xml etc. files..... still wouldn't start. Went to their forums.... have to wait to be approved before posting. Their sign up page isn't even secure. What a hot mess. Needless to say, I'm out. BE WARNED ! Luckily, my trusty Macrium backed up my hard drive before the nightmare began.

I am getting Crash To Desktop during the following P3Dv4 operation. I an starting P3Dv4v without any addons with the exception PMDG, A2A ,Beechcraft V35B Bonanza and Carenado C90B King Air, ChasePlane, GF and GF interface loaded.. I Have the Beechcraft Bonanza setting on the runway while I am programing the switches. After about 15 minutes I crash to the desktop. The light blue screen with fuzzy letters informs me that the ddfltsys failed. This has happened 3 times. I just did a complete format and installed Windows 10 Pro yesterday. Without starting P3Dv4 loaded the system is stable. Tom Johnson

I've installed P3D v4.3 on the PC in my sig and have come across a serious problem which has baffled me. I am still adding airports and at present only have the FSDT and FB airports plus GSX, Ultimate Terrain X Europe, USA and TAC. Orbx FTX Global is also installed. I have installed MyTraffic6 and then after P3D problems removed it and copied the version I had on my previous computer running P3D v3.4. That version of MyTraffic was stable and I rarely had ntdll.dll crashes. I have conducted a series of tests this morning with and without the MyTraffic6 addon. Here are the results:- On 5 out of 8 instances P3D crashed before the free flight screen was di…

I have problems with my P3Dv4 (latest version). If the simulator is loading the it takes 2 sec. to load ChasePlane (or EZDOK) and then I can use it. In this Moment i hear a USB connected sound. At the same time my simulator crashed. If ChasePlane is active in exe.xml there are 3 failures and the software Active Sky prompt "Cannot control ambient weather parameters" 1. Name der fehlerhaften Anwendung: PREPAR3D.EXE, Version: 4.3.29.25520, Zeitstempel: 0x5b2c3263Name des fehlerhaften Moduls: ntdll.dll, Version: 10.0.17134.376, Zeitstempel: 0x60d78cf9Ausnahmecode: 0xc0000374Fehleroffset: 0x00000000000f4d7bID des fehlerhaften Prozesses: 0x3434Startzeit der fehlerhaften …

Hello everyone, I have bought the Taxi2Gate Paris LFPG airport for P3D V4... but i notice when i fly to or from the airport the sim just crashes (about 30-40 minutes into flight) and does CTD :( The weird thing is that when my plane is one the ground, nothing happens (no CTD) but as soon as i takeoff, it crashes ! this also happens a lot with PMDG aircraft and Quality Wings 787...(but not so much with aerosoft A320 series) i have rreached out to Taxi2Gate support MANY TIMES but NO Anwser (very disapointing and unprofessional) all i have is the event viewer report I hope some experts out there can help me thanks! …