The TinMouse Support Forum

Good morning.I´ve reinstalled my windows(Vista HP). Now I have installed the Tinmouse 1.31 to the FS9. Almost everything goes well except for the ASI and the Fuel Pumps switches.ASI remains still in the zero speed status. Low pressure indication is iluminated by all fuel pumps even through I am full of fuel. Centre tank lights extinquish when I turn the switches off but the others are still lit. The yellow fuel shines on that Master cation panel which is on glareshield next to the FCU(or how is it called).I am having the SP177 version of cockpit. The FSUIPC version is 3.99and the sim is FS9. My windows is Vista Home Premium and is up to date.I don´t know if it is all coz …

The TinMouse II V1.40 is nearing completion of flight testing at the underground TinMouse skunkworks facility.The updates in this version were intended to be part of a more comprehensive update to come later, but the widescreen format (both 16:10 and 16:9 native bitmaps for both FS9 and FSX) has proved such an improvement to the sim experience during testing that I have decided to release it as an early and separate update.The wide-screen format includes a gear handle (with "Off" position modelled), the gear light "christmas tree," all the hydraulic and brake press/quant gauges, an extended full-width version of the SP-177 (with both CMD A and B switches modelled), and ad…

Hi Bob, i wish to say thankyou for the great job and the dedication to this project.Two things to say, other than everithing is almost perfect now.1) Issues on v 1.32 i noticed after a couple of flights in fs9 environment- No 400 Hz buzz for me, even with the volume parameter set to 5;- With SP-177 we lost the altitude alert funcionality, now altitude alert is connected to mcp altitude only and is unuseable as trasition altitude reminder as before;- during flight, sometimes the two epr gauges freezes "upwards" and is not possible to visualize EPR increases while EGT, N1 and N2 are working well. in other words the EPR gauges doesn't allow the needle to go beyond a specific…

I have modified the bitmap for those who have 16:9 screen and want the ILH TCAS.Installation:Copy the main_w_16-9_tcas.bmp file to you Flight Simulator 9\Aircraft\fsfsconv\panel.B732ADV folder.Look for this line : [Window 00].Below this line you should see file_1024=XXXX.bmp. Change the XXX (or whatever its called to main_w_16-9_tcas.bmp).Download it from here:http://dl.dropbox.com/u/5953835/main_w_16-9_tcas.rarIn the next few days I will upload a panel config with CIVA INS, Project Tupolev freeware Garmin KLN90 and INS Updating lights.Thanks Bob for his great project!

Hi,I put this question on the CIVA INS forum, but no answer so far.I have a question about using multiple cards - I saw this answer on a previous post:Only the first card has 9 waypoints.Other cards have 7 waypoints.So when you are flying the leg 8-9 of the card n°1 you have to load the card n°2 from waypoint 1 to waypoint 7.When you are flying the leg 6-7 of the card 2 you have to load the card n°3 from waypoint 8 to waypoint 5.....so on.I checked, but the other cards also have 9 waypoints so I am a bit lost on when to change cards.Thanks for your help,Olivier

The panel configs all have this entry[Fixed Window37]file=UP.bmpsize_mm=1024visible=0nomenu=1render_3d_window=1window_pos=0.0,0.0window_size=1.000,1.000ident=37Yet I find no UP.bmp in any download V1.30 , V1.31, and V1.32?? Am I missing something here?

Hey! Thanks for the now update. I am wondering if there is a 16:9 bitmap with the ILH square tcas, only 16:10 comes with the download.Thanks,Bar.

I never noticed this before. I think it's new with the 1.40 update but my Hyd Qty A gauge is reading in the red at 4%. I have included a screenshot. How do I top er up?Pat Callaghan

Hi Bob,Many thanks for the new 1.30 to 1.40 version!There is something however I can't fix : I added in title line JT8D-15 KGS -MB as per pdf manual, but the alerter will not changeto Millibars. Any ideas why?Thanks for your time,Sotiris

Hello all,First - thanks to all the developers for this wonderful bird, and for now making it work in FSX!! I'm very grateful!I'm trying to do a repaint of the Mouse in AccessAir colors - a good friend of mine used to be a dispatcher for them. So first, the disclaimers:1) This is my first repaint for FSX, so I'm learning as I go :( 2) I'm using GIMP, as Photoshop is not in the budget for what might amount to just one repaint (though I am having fun with this so who knows...)So, here's what I have so far:Full Template - AccessAirAnd so far so good. However, I can't for the life of me figure out how to fix the following issue with the Light and Shade layer:Light and Sha…

Hi ,I wonder why I get this error message when starting FS 9 while it worked fine before: " FS 9 can't load AICRAFT\fsfs conv\panel.v732 ADV\B732 ADV.GAU " .I use v 1.24 .Hope to read you soon to resolve.Bests regards D . LANDRU :(

Problem solved!Deleted FSUIPC keys!

Hi! it's me again. I finally got working the TM 732. I bought FSX Acceleration Pack and the gauges work perfectly fine..Now i got another problem. Wen i open the 732 panel, a message came out. Someting like: " FS2AUDIO.dll Initialization failure verify that is in your System32 folfer".....I put the FSAUDIO.dll rigth here: C:\Windows\System32 And nothing, the same message. So i dont have any sound; Engines, panels' sounds anything! Please help!.I got Windows 7 Ultimate 32bit with Directx 11 and FSX Acceleration.Regards.

Hello, after installing V1.32 i am unable to select from the aircraft menu it just stays at the bottom of the screen and after a while i just get a CTD. Any help appreciated. Thanks.

Hello To AllFirstly, thank you for all of your hard work with this AC. I've been wanting a TM for ages and now its here. Excellent. The install instructions are very clear too BTW. I've understood them..so this must be... I realise there's a great deal to learn re: 'flying' this AC and I look forward to it. However, (there's always an 'However') After checking through this Forum and 'fixing' a couple of things with the help of the Forum...namely the FS2Audio.dll not loading...updated my DX...Now fixed. Thanks. Also solved the problem of, when closing FSX after using the AC, the FSX AC selection screen disappeared to right hand corner of my PC screen and froze. Suspect th…

Hi all Would anyone care to summarize the takeoff configuration requirements in order to avoid the alarm horn. I have been working with the airplane for several weeks but have managed only a few takeoffs without the horn sounding. At least I believe it is this horn. I have PDCS set, V speed / flap setting set, flaps appropriate, RTO selected, yaw damper on and (probably) the air conditioning /pressurization set correctly; both bleeds on, isolation valve set to auto, packs on pressurization set to flight and "auto"; hydraulics and generators selected on. In addition I have found that after landing with parking brake set the doors will not open correctly -- the main door b…

Hi! i got a litle doubtDoes Tin Mouse support the FSX Servipacks??? I have FSX SP1 and the gauges don't show up!!Plese answer ASP! Cheers from Venezuela

Hi Colonel and Tinmouse flyersFirst, thank you Bob for this elegant FSX aircraft. I enjoy it at least as much as any other plane. My question is how I can get the wings to appear in my 3/4 rear view, from the panel view. In other words, when I pull the hat switch back and left or right, I only get lights and no wing textures. I downloaded another package from Simviation, with a bunch of liveries, and I see the wings. Maybe it's the model? Anyway, I'd really like to get your official version working fully.Thanks for any help you can give me.Eddie J

In FS9, every time I select the throttle quadrant, then click on the "stab trim/Normal" lever, it does a CTD. There are 2 small levers there and the right one will switch up and down, but the left ones causes the CTD.It happens in FSX as well, but takes a few clicks over the left lever to cause a "Fatal Error". Any ideas? I searched but didn't come up with anything!?Bruce

Has anyone gotten the Jetways to attach to the Tinmouse2 in FSX?? I have tried, but to no avail :(

HelloI've spent the last 2 years developing this panel for the Boeing 737-244 ADV, it took me so long because I had to learn from 0 and no much time due to work. Anyway it was developed upon several third party gauges, mods, and addons, so my work consisted in research and assembly of the parts I need to achieve a better look.PANEL IS NOT PUBLISHED ANYWHERE due respect to the other developers but I'll ask for permission once the mod is 100 completed and spent severeal hours testing.Panel characteristics:-Auto installation program with Tinmouse II 737-200 model with updated modified handling and my own eye-candy repaints-Panel Main view using main layout from Luis da Costa…

This is really weird. I flew the mouse yesterday for the first time since I got my new computer. Everything was fine except the autobrake would not work in flight. Worked in RTO but not in any flight regime. I checked my CH pedals & reset them with a little null zone in FSUIPC but nothing changed. They did not seem to be spiking anyway. Not sure what I am doing wrong. Any ideas? Pat Callaghan

Hi all, dont know if someone else has posted some settings for the shockwave lights, however I'll send you all my settings[lights]//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landinglight.0 = 1, 8.3558, 0.0000, 9.4058, fx_shockwave_beacon_fastflash,light.1 = 1, 11.3558, 0.0000, -3.9672, fx_shockwave_beacon_fastflash,light.2 = 3, -13.1086, -46.3622, 2.5446, fx_shockwave_navred ,light.3 = 3, -13.1086, 46.3622, 2.5446, fx_shockwave_navgre ,light.4 = 3, -48.5807, 0.0000, 7.1568, fx_shockwave_navwhi ,light.5 = 3, -17.3041, -46.1595, 2.3199, fx_shockwave_navwhi ,light.6 = 3, -17.3041, 46.1595, 2.3199, fx_shockwave_navwhi ,light.7…

Hallo everybody!Yesterday I have downloaded the wonderfull TinMouse B-737 200 Model.I have installed the Aircaft in my FS-9 by following by the letter on the installation Procedure in the Readme.Then I was very currious about this beautyfull panel and Aircraft, and have take a night Flight from KSEA to KLAX.So I have seen that I don't get the Landings and Taxi Light to work.In the external view I can see that all Lights are On and Working, but from Outside and Inside I have no Lights on the ground or Lightsrefelxions that I can see.Normaly you can see the Lightbeam on Ground, as Reallife and in the Simulation.A second strange think I have remarked in the Cockpit, as I pan…

Hi All:I've seen that when you add, the Lee's TCAS System to the plane (No ISG nor other) I does not work, just show TCAS on the VSI.Having seen the Panel.Cfg for SP77basic and SP177basic, I saw that you can choose betwen mechanical VSI and TCAS, but the System gauge for it was just not added.A solution to It is add the nex line (ONLY IF YOU HAVE CHOSEN THE TCAS VARIATION OF THE BASIC PANEL AND UNDASSHED THE CORRECT LINES!!!)To the [Window00] Section at the endgauge67=ILH_TCAS!Logic, 0, 0, 1, 1This line do not add the specific Transponder Gauge to the radio panel, but make it work.Bob your Panel is Great, great job! Thanks a lot