The TinMouse Support Forum

I downloaded B737-200 Tinmouse/FSX from Avsim and installed. Unfortunately I must done some thing wrong 737-200 is not showing up in FSX aircraft list. I copied/paste B737-200_TM2 to FSX\Simobjects\Airplane folder. Thanks

Hello Mr. Scott, I've been following the TM2 project for a long time now and really enjoy this aircraft. So first thank you very much for your great work on this aircraft! I was just wondering, is the TM2 project still alive and developement continuing? Or have you stopped working on it ?Are there any future updates planned to incorporate things from the wishlist or other new things? It would be very nice to know if this project is still alive. Maybe you could give just a short notice. Thank you very much again for this amazing freeware. Kind regards, Oliver

Greetings, This has been an ongoing issue with me. I have always had a 5 degree nose up cruise deck angle. It seems to make no difference how I change my load or altitude or cruise speed. I have included a screenshot of a flight this morning. Below is my load section of the aircraft.cfg. Is this right? Anyway to fix this. Thanks, Pat ____________________________________________________________________________________________ [weight_and_balance] max_gross_weight = 117000 empty_weight = 61890 reference_datum_position = 0.0, 0.0, 0.0 empty_weight_CG_position = 1.20, 0, 0 empty_weight_pitch_MOI = 571131 // 1171257 by Roskam Approximation empty_weigh…

Recently I bought the VRinsight MCP Combo II (Boeing type), mainly to be used together with the PMDG 737NGX using the wonderful LINDA software. I was wondering, however, if someone managed to get the MCP Combo working together with the Tinmouse 737-200? Or maybe somebody knows how I could get it to work?

Would anyone be willing to share their SP-177 v1.4 config file which has the corrections implemented as well as the ISG FMS and RealityXP WXR500 already embedded? This is something I feel would be very helpful to the Tinmouse community if someone would be so kind as to post it up. Thank you!

Has anyone got this to work in Prepar3D. The only issue I have is no panel sounds. I get the following message:"One or more Xact Project Files could not be located at specified location".Be nice to get my favourite aircraft to work in this sim.

Hi, I don't have any of the addons yet (CIVA/ISG). How can I make a panel.cfg for the standard plane with SP177 autopilot but widescreen? by default it seems to be the SP177 with a 4:3 Panel.

I hope someone can point me in the right direction. On take-off and climb, the 737 slowly but surely turns to the left. I am not using weather. The joystick is NOT the problem. It IS calibrated correctly. This problem ONLY happens with the TM737. I've tried other planes and they all hold the heading, right up to cruise alt - this is with the AP off. There must be some minor FD adjustment that needs to be made. It's definitely a FD problem. Anyone have any ideas? Maybe you've also experienced this ????? Thanks Trevor

Was going to put another few requests In on the old thread but couldn't. Was wondering if it would be ok to start another one as I have a few that I haven't found yet Air liberte 732 Us air Peach air Canair cargo Air Caribbean Air sul (old) Brathens safe Air Nauru Malev Unless these have been made, I'm sorry but I'd like to see these done sometime, mostly just the air Nauru for now...

Was wondering now that captainsim and milviz both have great 737-200 aircraft with great panels and vc as well... The last time I posted her there was someone other than rich probst who was going to or did create a new panel. Did it have a 2d or 3d vc? I'd like to see a vc for the tin mouse soonor where I can find one here

Having upgrading to V1.40 with a new computer and widescreen (16x9), I just noticed that the red gear intransit lights in the Christmas tree stay illuminated after gear retraction. I've checked the forum and re-read the docs and fixes...just wondering if I missed something obvious? I have had some unexplainable FSX things to deal with in the past, so if it's just one of those, I'll just cover up the tree with the radio panel like usual...which is why I didn't notice the issue right away. Thanks very much, Bob for this wonderful airplane! I've been through V1.26, 1.32 with FSX and now 1.40 and it's been a real treat to fly over the past 500-ish hours! Cheers!

Hi, im new here and very interested in this bird.I've download and installed the new panel (B732free.zip) and I wondered that how to toggle the wingview up. What I need to press on?P.S. Is this new panel or the tinmouse's official v1.40 panel are better?Thanks, Pete ;)

Hi there. Newbie here so I hope this isn't a dumb question...I've installed all versions of the TinMouse 737-200 on FSX from 1.30, 1.31, 1.32, and 1.40. Seems like sound and panel are good, except there are NO GAUGES or SWITCHES on the panels. I'm wondering if I have a step wrong somewhere. I thought I followed all the instructions, and even saw the corrected instructions...My directory structure looks like this:C:\Microsoft Flight Simulator X>1.---------------------------------------\TM.ini2.----------------------------------------\Effects\fx_smoke_JT8D.fx3.---------------------------------------\Sound>-------------------------------------------------\TMPandelS…

I've raised this one before, but was told there is no problem with the pitch.I have calibrated the joystick using FSUIPC - there is no problem there.Null zones and sensitivity settings are default.While climbing, the nose keeps coming up. I trim down and the nose comes up - I trim down again and the nose comes up .....I have at one stage just let the nose keep coming up - it just continues until the plane stalls.One should not have to trim down every 5 seconds in a climb - definitely not in this 737 - it is NOT realistic.I tried to correct this in the air file - section 1101 primary aerodynamics. The section on pitch moment coeff at AoA (trim os). The value is negative …

HiI know that you cant have "2d" views in fsx without a vc. If I put the vc of the default fsx 737 or even the wilco 737 (might look a little nicer) will that give me the side views from those planes? I wont be flying from the vc I just want it for the side views...would this work? Has anyone ever done it?thanks Lee

Col Scott,My apologies if this issue has already been discussed. Using the Forum search engine found lot's of hits, but nothing that seemed specific to the TM.I like to start from cold and dark to add to the realism when I fly the 732. It seems here lately that after I get engines running, packs set, and bleed air properly configured that when it comes time to turn off the APU it immediately goes into the red and overheats and I get a yellow "Overheat" warning on the panel. I never get a fire warning, but the APU stays in an overheat condition until I land and turn the APU back on while taxiing to the gate.A brief synopsis of my "cold/dark" process, which by no means i…

Hi GuysHas anyone ever done a classic Britannia Airways livery for the Tinmouse? Did the files disappear with the Avsim hack?RegardsStuart

Hi Bob,Error message about 737-200ADV installer file being damaged and ask for a new installer. Is there such an animal ?I lost my previous TM2 when my system crashed and I miss it dearly.Thanks for you great work.Jack

Hi everyoneFirst of all, my thanks and congratulations to all of those who have developed this wonderful aircraft. Not only is it a delight to fly, it's also a great change from the more "mainstream" FS offers around. Although new to it, it certainly has won me over ;)I do need help with an issue: I have version 1.40 correctly installed with all the upgrades as per the instructions. I also have the ISG suite installed and want to use the Smiths FMCcoupled with the SP-177 but I am having some issues. Despite many attempts, I can't seem to get the LNAV to engage. I know there have been some issues from what I have read in the forums, and I have tried all solutions given but…

Nice Hi-res cockpit video of the B737-200 on YouTube: Rich BollWichita, KS

Good day,I downloaded your great plane for FSX, but I have question. I am total beginner with 732 and I don´t understand some advices given in this forum at all. So I want to kindly ask, if someone here can explain me like for a dummy :-)I tried to takeoff at several airport like Samedan, Geneva and Innsbruck, but 732 uses all the runway and took off from the forrest behind the airport. All airports are served by 737 and at LSZS 732 were. So I want to ask for help :-)I tried to set 15% flaps and throw out all the luggages and pax to save weight :-) No improvement.Thank youawacs

Just bought the avionics suite by Angel Simulation. As you can see I have installed an EADI.

All, I blew the dust off my Tin Mouse II this past weekend to do some Island Hopping around Hawaii... The new FSDreamTeam Hawaiian Airports - sure add a great deal to the old islands... Of course the Tin Mouse is the perfect plane for these kind of flights... I'm probably still runnning 1.3x version of the panel... I used to have these planes dialed in and I could fly them well... This time - every time I engage the autopilot - they pitch up to stall... I have both the Tinmouse and Cantu models loaded - both do the same... I am pretty familiar with the autopilot use and realize pressing on the yoke controls pitch - with this model autopilot... Even with me pushing do…

Hi ! I've the 1.31 version with Seven and fs 2004, and I wonder if it is possible to add the "Smoke Effects" on Take-off,to know how to do that in aircraft CFG,and to add "RainWash Effects" by arjanscheffel too .However if this is compatible with the TIN-MOUSE project.Hope to read you soon and your help to finalize my aircraft .Regards Colibri

Therefore I am unable to select it, it doesn't show up at all. Correctly installed, followed all manuals. Help?