The AVSIM Screen Shots Forum

Dubai to Bangalore with FedEx. A very recognisable piece of architecture in the background. Ready to go. +VE rate, Gear Up! (FSX NOTAM: Main gear door animation missing. Was present in V2.0, but not V2.2 Sky Sim notified, but unable to reproduce as yet ). Climbing away across the desert before feet wet over the Arabian Sea. "Lonely... I'm Mr. Lonely... I have nobody for my own.." (with apologies to Mr. Vinton!) Feet dry over India. Descending for a visual RWY9 approach. VOBL is that pale area just to the right of the windscreen pillar. …

Hello, after the Departure from Dubai, I finally arrived at the new ORBX LYBE Belgrade Nikola Tesla Airport. That was an really nice flight - recommended for everyone. I also updated the AFD for Belgrade and installed the SODE VDGS at this Airport - more fun when you taxi to your gate. Thanks Urmel

I did my first flight with the QW 787-10 addition, from Jeddah to Abu Dhabi. Quite pleased with the upgrade and the fact that QW is still supporting FSX. Boarding passengers with GSX - Level 2 expansion takes a LONG time (as I don't like time compression) This is straight out of the simulator, with no editing applied.

I make it a point to fly my B757 SIMs (CS and QW) from time to time, just because the B757 is such a nice and enjoyable (jet) plane to fly in our SIM (with its interesting combination of, so to speak, "old" and "new" cockpit technology). Today, while looking to make a flight with the CS 757-200, I ran into a curious coincidence...the Shanghai Airlines (CS) livery (Registration: B-2876), that I wished to fly, happens to be the very last B757 ever produced (the 1050th off the line)! This aircraft is therefore the final Boeing 757, to roll off the Renton, Wash., assembly line in October 2004. It was delivered to Shanghai Airlines in April 2005. After 10 years of service, in …

Schiphol ATC is always good for a laugh.... it needs to be, took me half an hour to taxi to the active Rwy 36L! Pics are from my flight K4204 Amsterdam/New York. If you would like to see the full flight in with sound and motion check here: https://www.youtube.com/watch?v=Sy37ah4sFzk

Shalom and greetings all my pals, Presenting a nice British Caledenian A310 charter flight from EGKK Gatwick Airport 29.5 miles south of Central London to LFMN Nice Côte d'Azur Airport 3.7 miles southwest of Nice in the Alpes-Maritimes départment of France carrying movie celebrities and motion picture industry bigwigs to Nice to attend Cannes film festival that requires tight maneuver stunt to the airport to observe noise pollution ordinance Airborne on climb to F350 passing background view of suburbs of London Nice wing view of suburbs of London Climbing climbing climbing to start the route: MID UN615 XAMAB UL612 RESMI UM728 OBEP…

Montreal by Night...Several Aerosoft Aircraft doing the Honors Thanks for viewing, Darryl

on the way to Nuremberg with the new PMDG 737 NGXu! the update for the LIEO AFD was really necessary - now I can have fun! (including an new GSX Profile 😉) Regards Urmel

Hello Guys, I love my new Toy with my AI! Enjoy ORBX ESGG Gothenburg Landvetter Airport All AI is provided by the Alpha India Group (AIG) for free. They have also an new easy to use installer, the OCI! Try it, it's for free, it's easy, it's high qualtiy. SODE VDGS with PMDG NGXu: Regards Urmel

Work in progress....Flying over a rather famous Sydney landmark... You have got to love those PBR effects!

I did a Calgary to Victoria flight the other day and was struck by how perfectly the FSX add-ons captured the moment.

Now that I'm a bit familiar with the terrain and geography of the region between Whangarei and Gisborne, I thought it's a good time to take a personal (and "unrestricted" i.e. no "visitor-badge" required...🙂...) tour of these two airports with my trusted guide "Bob". The first 8 screenshots, below, are for Whangarei (NZWR) and the last 10 are for Gisborne (NZGS), with the NZGS set starting with the "Welcome to Gisborne" sign. It ends with the shots of Gisborne's century-old Palmerston North-Gisborne Line (WA165) steam train, crossing the (14/32) runway. Gisborne Airport is one of the few airports in the world that has a railway line, crossing the main runway. As…

Shalom and greetings all my pals, Presenting a nice recreation of real world Western airline Electra flight from KGTF Great Falls International Airport located three miles southwest of central Great Falls in Cascade County, Montana to CYYC Calgary International Airport located approximately 11 miles northeast of downtown area of city of Calgary in Alberta, Canada Jetway disconnecting from the Electra plane showing real genuine cream color Western livery Dig this amazing perfect cream color of both sides of the plane Starting each of engines in the succeeding screenshots while you admire realistic looking cream color livery of W…

The New CRJ Professional...Now with PBR (inside & out). With PBR this model comes alive, also I'm loving the EFB! Barcelona LEBL (Latin VFR) Eagle County Regional Airport (Orbx) Stockholm Arlanda Airport ESSA (Orbx) Minneapolis–Saint Paul International Airport KMSP (Flightbeam Studios) Thanks for viewing, Darryl

Valdez PAVD (Orbx) - a few shots over the bay Rex Direct Texures and Tomatoshade at work (besides Orbx). Cheers

I had earlier posted the part of my flight in Carenado's ATR72 lifting off from Whangarei (NZWR) Airport. Here, I pick up the rest of the story of my trip to the historic town of Gisborne (NZGS). I'd mentioned that Gisborne's Kaiti Beach (east of the city) is the place where British navigator Captain James Cook had made his first landing in New Zealand on the Endeavour. It was on his first of three voyages into the (uncharted waters of) Pacific Ocean that James Cook and party had sighted New Zealand (being the second Europeans to visit there, following the first European discovery by the Dutch explorer, Abel Tasman, 127 years earlier). New Zealand's Young Nick's Head is t…

Flying from PAJN to PAKT....ran (or flew more appropriately) into this waypoint that inspired the title of this post. 🙂 Love flying the TBM in Alaska!

On the flight from Stuttgart to Chania 😉

Hello Guys, I purchased the new JustSim/Digital Design Stuttgart Airport a few days ago and finally I have one of my Home Airports in an really good quality. I enhanced the AFD a little bit to get it more realistic and also enhanced the GSX compatility with vehicle path's and more things. I'm on a flight to Aerosoft Chania at to moment from Stuttgart. And I have fun! The AI Traffic is provided bei the new AIG OCI, fantastic! Try it! Have fun! Urmel

Chicago, Chicago...Three Airplanes, Varied Fall Days Thanks for viewing, Darryl

Just Flight C-46 Commando, ORBX PNG airstrips Busy morning in paradise My wife and I once flew with them from Manila to Port Moresby. Interesting experience… Finally we are off Over the “hump” Finally Kokoda comes into sight. Drop everything Thanks for viewing

Purchased Washington HD for XP11 (sale)....200+ GB SSD space heh....but I've always wanted to try at least one of these sceneries. (Now with the GTX 1080 Ti the vram is no factor). The promo shots of TE Washington are mostly all higher altitude but I wanted to show people what it looks like around 1000 AGL. Overall it still looks really nice. I'm using the amazing JRollon Marchetti SF260 with RXP GTN for my touring. I plan to fly all over the Olympic Mountain area. Part 1 consists of me departing Bowerman (famous Orbx landmark hehe) and heading west to the coast, flying over Ocean Shores W04, and up towards Covalis State S16 (airport on a beach), and then nort…

A Very Happy Thanksgiving to all of you celebrating today,Just in case you don't get enough Turkey,I thought I'd give you some The USN Provide,The Grumman F-14 TomCat "Turkey" 🦃 😁🦃 Happy Thanksgiving Friends🦃😁

Ortho4XP, Michael Wilson's superb L1011 Tristar for XP11 Thanks for viewing

Trying to get my butt outta North America...and see the world, lol... Left click within the pic's twice to bring up to full view resolution...the detail then is displayed. This is XP 11.40 with SFD Global and Europe 3.0.6 installed, as well as HD v4 mesh.