The Level D 767 | Wilco PIC 767 Forum

sorry to sound very thick,but I'm new to all this.When I've downloaded a flightplan from the 767 flightplan page how do I get it into FS2002?Thanks for any help.

i am in flight right now descneding into KLGA and the thing with the engine happened to me where one engine is the only one that's responding the other is on but it's not responding i think it usuallu happens by pressing the letter E by mistake.Thanks.Best Regards Adib Afraj

My Microsoft Forcefeedback version 1, just went caput...Which sould I get Logitech or Microsoft again??

HiSee screenshot.I seem to be having some problems with the VNAV function of late.As you can see I have selected 310 kts in the MCP window for the initial climb until about FL270'ish to avoid an overspeed.It is my understanding of the VNAV logic that it should try to maintain the speed selected on the MCP FIRST, and then the VS will obviously allow to make the aircraft fly at this commanded speed.Most of the time this works, although on this occasion VNAV just wanted to climb with no regard to maintaining the speed. Speed when the screenie was taken was about 295 IAS and decaying rather rapidly due to the +4000fpm climb rate.Can't figure this one out, it seems to happen …

http://www.dennissutton.com/756_Guide.pdf

Hi Folks:I need some help.I have downloaded the latest data for the FMC (and confirmed that it properly got to the /fs2002/fmcwd/navdata/... folders).However, when I try to activate (in the arr/dep page) a SID for Viru Viru (SLVR, Bolivia) when I select a SID, the transitions don't show up on the FMC.I tried a couple of other airports (i.e. ksfo) and when I select a SID all the stored transitions show up without any problem.Any suggestions as to what might be happening?Thx.Roberto

Hi Gang,Is 767 PIC still available in the US? I couldn't find it here at the AVSIM store or anywhere else but Europe. I did find it online at PC Aviator (I think) but they wanted almost 60 bucks for it. I also checked Gamestop and several other computer stors... Zilch. I'd prefer a download version if I could find it. Any ideas?Thanks!Jim

Hi guys ---When i'm in flight and i look out in spot view and go back in the cabin i go shift enter [once and back space - ] once now i'm in the view i want to be in till next time i go into spot view than have to do all over again. How do i set it in the con. file so it stays permanent? Another thing is if let's say i'm down wind on clearing speed of 220 and my weight is set at roughly 300-320 which makes my last flasp bug at 220, should i at this speed have my flaps con. to the 1st notc/ Thanks -----Louis ml2488--cva2488[http://www3.telus.net/cgi-shared/filemgr.cgi/public_html/pictures/LouisJetsignS100.jpg]

Hello all,I am a newbie and just bought 767 PIC. I have done the upgrade to FS2002.I can not seem to get the adventures to be recognized. It says the flightcan not be located. I used the default install except designating the fs2002 folder. Where are all the ADV,FLT,Wx files supposed to be?Thanx for any help, Steve:-zhelp

To those of you that enjoy good landing views, I have made one for the Dreamfleet Cardinal 177, that provides excelent gauge size with a great outside view and of course a hidden switchover. this does not take away the default landing panel, but adds mine to the package. If anyone is interested you can mail me at [email protected]://forums.avsim.com/user_files/3913.jpg [h5]Best Wishes,Randy J. SmithSan Jose Ca[/h5][h3]" A little learning is a dangerous thing"[/h3]AMD [pink]XP[/pink] 2200 |MUNCHKIN 512 DDR RAM |ECS[/b ][i] K7S5A MB[/i] |GF3 64 MEG |WIN XP PRO |MITSUBISHI DIAMOND PLUS 91 19"

I've been out of things for a while... Anyone know how Eric Ernst is and, assuming all is well, what he is up to these days??Cheers- MikeB

Hi There,Such a strange problem being encountered.I carry out the Flight Plan and export it to FS2002 flights and Pilots folder and when I come to load it from the COROUTE in FMC the FPlan does not come up. Tried also with the export utility from FSNAV to PIC FMC folder but to no avail as well. The problem occurs only with EHAM airport. The scenery is from Lago.Any other one encountered this and any solutions please.Help is appreciated.Regards.AMC.

Hi.I have dual monitors, and thinking about using the second monitor to display the popups like FMC, overhead, and pedestal. Is it possible? I found WideView but it works with networked PCs, not just dual monitors PCs.I'm thinking about going VATSIM soon, and it would be very handly to have all those things already up :)

Hi guys,I would like to run the MCP in a seperate window (i.e. shift+7). Would a panel guru be so kind as to please post me the entries to add to the panel.cfg file?Thanks in advance,Andy

Here are some pictures as promised from some trips I had about 2 weeks ago.1.Picture taken in EDDF with United 777 taxing to the gate.2.This one is from LIRF I spent 2 weeks in Rome. Lots of fun.3.On our way to Kuwait, enough said about this one.4.Sand storm in Kuwait...5.More from where else.....?Hope you enjoy them, the 5 upload limit makes it really hard to upload pictures here.

Apologies for the double post, finger trouble...Cheers- MikeB

Hi guys, A good friend, Troy Shelley, and I are conducting a RTW flight.We are departing Sydney on Easter Sunday and will return Tuesday. Here is our RTW plans as we will file (note: all times are UTC): Leg 1: Sydney (YSSY) to Nadi (NFFN)ETD 0900 ETA 1230 DCT SY B450 NOBAR A579 NN DCT Leg 2: Nadi (NFFN) to Los Angeles (KLAX)ETD 1330 ETA 2300 DCT NN B581 FICKY LAX DCT Leg 3: Los Angeles (KLAX) to New York (KJFK)ETD 0000 ETA 0430 DCT LAX DAG J100 OBK J584 CRL J554 JHW J70 LVZ LENDY JFK DCT Leg 4: New York (KJFK) to London (EGLL)ETD 0530 ETA 1130 DCT KJFK PUT J42 BOS J575 TUSKY N63B VIXUN 4950N 5140N 5230N 5320N 5315N UN535 SHA VG1 KENET OCK EGLL DCT (May change subject to N…

After installing PIC in FS2002, everytime I would start a flight, I would get this error message: "Scenery library object not found", and then a whole list of nunbers. I would hit the OK button, and at least ten more such windows would show up, so I kept OKaying them until no more appeared. Then FS ran normally. Occasionally these windows would show up when changing planes.Even after uninstalling PIC, the above messages would appear.How do I deal with this annoyance?EytanTJSJP3 450256 RAMGeForce 2 MX 200 64 MB30 GB HDWindows 2000 PRO

I think that subject has already been discussed, but it's a long time I do not enter this forum so my simple question is:Is 767PIC fully compatible with FS2002 under Windows XP ?Thanks

I seem to remember the PIC team saying that they were working on another project? Am I correct? If so, what happened to it? I doubt it has passed me by, but it might have as I've not been keeping up to date over the last few months.Thanks.phil

Hello, i need help for adding the Kai Tak airport to the navdata/airports in PIC767 ? i use the ultimate hongkongscenery package,currently VHHH is shown as VHHH 22.308919 113.914603could anyone tell me the working after the decimal there forthe co-ordinates ? even a basic edit to add the airport can workcan it not ? if so how because FS recognises the IGS approachto RWY13 anyway ,if i got the FMC to recognise VHXX that wouldbe excellent to fly out of the legendary Kai Tak Thanks Deepan

More pictures1.Yours truely flying from EGPK-LIRF 757-2002.Sme leg3.Flying over the French Alps going into Rome.

Need help with 767 Dispatcher. I just downloaded the program and am wondering when to use it. Do I use it after I've done a flight plan in FS Navigator and after imported to the FMC and FS 2002 for Radar Contact, V-3? It seems to me I would try to get current runway info from departing and arrival runways first. Just a little confused on when to use the program. Thankyou for any help.

Im wondering if anyone knows how to make the GPWS to work. I have it enabled in the settings for PIC and i still don't hear it. I donno if it would be the problem but im using the PIC 767 with the Merge for the POsky 767. Thanks in Advance,RobertPS: Also how do i add the lights on the posky model so, when you turn on the landing lights, it will show up on the engines, etc.Thanks again :)Windows XPSOund Blaster Audigty MP3+1.2 AMD786 Mb DDR 333Gigabyte 7DX+ATI 9700 Pro

More pictures..1. Our 767-300ER taxing to the gate in Roma..2. Alitilia's 777 getting service for a late afternoon trip..3. Flying from LIRF-EGPK4. Same leg5. Sight seeing shoots of Roma....