The Level D 767 | Wilco PIC 767 Forum

Morning chapsWith the release of GSX, im having grief opening the cargo doors on the LDS 767, i've tried and tried with shift e 1/2/3 but they just wont budge. I must have crushed half the pax to death with the frontentry door going up and down like a yoyo!!Anyone know of a gauge or a way to open the bloody things?Thanks guys [alert]Please click here to PM hodge001 to obtain a fix to this gauge. The gauge is also now hosted at the support forum at Level-D's site. -Chase[/alert]

Hi everyone looking for support. Since this forum was for the PIC767 and not the Level-D 767, the official support for the LDS version is found here http://www.leveldsim.com/forums/forum_posts.asp?TID=64&PN=1All the best with your new product. We look forward to serving you.

I had to reinstall Lavel D 767 on FSXSE. Before that this product ran perfectly, and is my favourite commercial plane. I orginally bought the LavelD 767 from Flight1. The reinstallation went smoothly, and the 767 shows up in the FSX directory, but not on the choose aircraft menu. GRRR! Why? Eytan Ornstein

Good evening sir My question : where is the Wilco PIC B767 ? Never see the !!

Hello All, I first bought the Level D 767 when it came out, enjoyed it on FS9, and then when FSX came out sort of ignored it. Had a HD melt down and had to build a new system which is strictly now for FS9 -- I installed the Level D again and when I went to set my elevator trim from my trim buttons on my yoke, it goes to full down trim, stays there and will not move. The levers with the mouse will move the trim but NOT from my yoke, and this is the only product which will not work the electric trim? Any one with this problem?Thanks in advanceClayhttp://www.dreamfleet2000.com/gfx/images/F...ers/Dopke01.jpgClayton T. Dopke (Clay)Major, USAF (retired)"Drac"

When a patch applies it to projects of the new announcementy.? Already next sim is the makes so i don't wait. By the weight, who is Ponderosa?

Hello, would anyone be willing to send me a patch for Wilco 767PIC (fs2000) to fs2002 ? Filename is "767PilotinCommandPatchFS2002.exe". The access to ftp.wilcopub.com is restricted, and file is nowhere to be found on the internet. BTW I registered my original boxed copy of 767PIC fs2000 at Wilco site, but no feedback from them.. thx for help..

Flight simulator has detected a problem with a third party software program add on NAME LEVELD D SIMULATIONS B767-300 add on for flight simulator x version: release 1.5.0 Company Level D Simulations Panels for FLIGHT ONE PUBLISHER FILE MODULES : LVLD.DLL BOOOOM THE FSX GO DOWN!!! I HAVE TO GO BACK TO MY FS9

I reinstalled Level 767 and now when I start FSX I get an error message- Modules\LVLD.dll error It causes FSX to crash..I never had this message before and cannot find a solution. Little if no information seems to be available. Any help would be appreciated. Thanks.

Just tested on a 4 hour flight, fly's like a dream. They have also updated the Interface for P3D, so I would recommend all 767 users download this version. http://www.leveldsim.com/forums/prepar3d-v3-windows-10-compatibility-update_topic26447&FID=3&PR=3.html

Apparently they just announced it at FlightsimCon! Man talk about a comeback! http://www.airdailyx.net/fsnewsbreaker/2017/6/10/flight1-level-d-757-200-to-enter-beta-stage

Hey guys - Has anyone to this moment in time actually created a REALISTIC merge between the LDS 767 & POSKY 757? Any reply would be much appreciated Thanks.

I'm using it and it works excellent. By just undocking the main panel, you have full function. I had trouble getting the his video displays to work properly so I just abandoned that and just undock the main panel and it works. Ugly as sin, but it is functional. Thanks Simbird!!!I am having trouble with the joystick. I downloaded the FSUIPC for FS2K4 and managed to calibrate using both XP's calibration and FSUIPC as well. But the joystick tends to stick, especially the rudder and the elevators. Taxing is a pain in the rear. Usually I have to load a default a/c and go back to the PIC and start all over. When I get to a runway, I reload the runway so I'll be perfect…

I have been dealing with this strange problem. I get my engines started, but after a bout two minutes, I lose all power to the aircraft., engines are dead. I have been using this airplane for over ten years and I have never seen anything like this. I have search and searched but I cannot a solution to the problem. Please help. James Shelton

Hi guysIan Mitchell has been hard at work again! We have a great new tool to assist you with your procedure database. Check it out.An Important New Release brought to you from the community at ldsflyingclub.com www.ldsflyingclub.com/proc/index.html Have a great weekend!

I'm attempting to adjust the fuel load down from the maximum for a shorter flight using the Configuration Manager run as an Administrator and from within FSX:SE under Aircraft | Fuel and Payload. Using either the fuel adjusts to the desired level for a moment then resets itself to maximum. What am I missing here? Edit: I should have specified...this is the Level D 767 with all updates in Windows 10 Home version 1809.

Greetings all, I hope that everyone who reads this is well. I am a proud past user of the B763 that was modeled by LDS since it was birthed for FS9. Now having switched to P3Dv4, there has been no talk of a 767 from LDS. I am aware that there was the loss of a fellow simmer and team member, however, I do not recall hearing anything else about the future of LDS. Apart from the B757, that was in the works for years and then forgotten, suddenly resurfaced in 2017, then nothing further has been said on it. Then in the forums when asked, people were told to just watch and see - let it be. As a company, respected by many, I find it a bit unfair that w…

It is great to have the good old Level-D 767 back and working again http://www.leveldsim.com/forums/windows-10-update-for-767-for-fsx_topic26426&FID=3&PR=3.html

I was flying from EDDF to EGLL. my progress showed 4.7 remaining but all of a sudden my pressure light comes on and engines shut down. I looked up at the fuel gauge and everything was 0.0. What could cause this problem? It caused me to crash during my VA which is now going to have to start over.

Hi, Recently bought the Level-D 767 for P3D and very impressed with it so far, considering how dated it is. The one thing I'm stuck on is the chrono in the VC. When I start the F/O's one when pushing back and the Captain's when taking off, the clock starts correctly on 0 and displays the elapsed time correctly until about an hour in. It's from this point onwards that the clock starts to display weird numbers instead of what it should do. For example, after about an hour and a half into a flight from Athens to LHR, it read 73 on one clock and 8 on the other. When I finally landed and stopped the clocks, both displayed '18' on their displays. I looked at the timin…

I finally added the Level D 767 back onto my computer in FSX, utilizing the current up to date version of the 767, yesterday. I have attempted 3 flights so far, and in each of them, around 20 minutes into the flight I get CTD. I am intrigued by this because several years ago I flew the Level D 767 for 746 total hours in FSX without a problem. Aside from that, I currently use the PMDG 737-800 and the 777-200 and never get a CTD. Has anyone else ever experienced this behavior with this model? I look forward to your insight. Rob

What is the maximum amount of waypoints allowed onto the FMC of the level D 767? The problem I am having is that I have a route from Seattle Tacoma Airport to Beijing Airport with 218 waypoints (42 pages) and my FS crashes after I input it. If anyone knows the specific number please let me know.

Hi there guys, recently I got a prob with my 767. I was flying on vatsim atc contacted me, tunned the freq, but when I tried to transimit, it said I was transmitting nowhere! At first thought it was a vpilot issue, though I tried another aircraft and I could transmit normally. These is a BIG problem because actually, I can't fly online on vatsim with atc! Any help qould be EXTREMELY appreciated!

Hello guys, I'm trying to download LVLD 767 into my P3d V3. Unfortunately when I try to run it, I always get "Error: Cannot find FSX Bitmap File" then P3d crashes. I was just wondering if anyone knew a fix for this or something like this. Thank you KH