The Level D 767 | Wilco PIC 767 Forum

I have just come across my old CD Rom version of LevelD 767 300ER--for FS2004 (complete with manual and Proof of Purchase Certificate). Can this version be installed and updated to run in P3D v3.4? Thanks William

I bought, a few months ago, the original version of wilco airbus v.2 (Feelthere). I made so many flights using the FMGC, ... and I installed the latest Airac1710. But when I wanted, during my cruise, to program the FMGC by wanting to activate the "Offset" button to make a lateral route at a given point of my path, then the button does not activate! !! while with the boeing 737,747 (PMDG) planes it works perfectly! This happened not only with me, but also with my other friends who have the same version of wilco !! I followed the manual of the use of the FMGC, in the case of the activation of the "Offset" : http://www.smartcockpit.com/docs/Smi...ilot_Guide.pdf

I like the new Zinertek textures for the cockpit, but they do eliminate the add on overhead door opening gauge. Does anyone have a solution to add that gauge back? The textures of the gauge overwrite the newer textures, and I would rather not do that. There must be a way around. Lee

Hi Folks. Hope somebody can help. Every time I align the IRS's and then set the position in the FMC I get my first way point 1000nm+ at the top of the FMC legs page, and needless tom say a message saying Insufficient fuel. I know I am aligning the IRS's correctly and adding the co-route in the FMC correctly. So, does anybody know why I am getting this ridiculous waypoint 1 1000's of miles away, and nothing to do with my flight plan. Thank you John

Hello. I noticed, when I engage APP, I can't get off of it. If I want to go around, I cannot use my autopilot after because I can't get out of APP mode, I'm stuck on it. How do I fix this?

Is the Level-d site down for good. http://www.leveldsim.com/ nebojsa

I was making a flight on mynew Level-D B767 last night from KMIA to LIMC. There was a tight turn in the SID and the plane blew past the fix. I tried to get it to bypass the fix and go on to the next one, but I could not figure out how to do this on the FMC. I ended up doing circles around the Bahamas and ended up aborting the flight. How do I make it proceed on to the next fix, or any other future fix, for that matter? Thanks, Andrew

Just curious back in June at the FlightSimCon we were told that the Level D 757 was in Beta and 85% finished but 2 months later not even a screenshot or video that Air Daily X promised!....... I wonder if we get an update soon

New Level-D 767 HD VC textures released. http://secure.simmarket.com/zinertek-hd-virtual-cockpit-for-level-d-767-fsx-p3d.phtml

Hi I have the updated 1704 navigraph cycle installed but when I am trying to build a route it keeps defaulting to a VOR that is 5000nm away. The VOR in question is Chicago-Rockford (RFD). I was trying to program a short route between KRFD-PIA. It does not give me an option to select the correct VOR.

Anyone having CTD's with the updated 767? All are ntdll.dll errors with an exception code of 0xC0000374 and a Stackhash_0392. Usually happens about 5 minutes after loading the aircraft, not happening with other aircraft. Win 10 x64 i7 4790k with GTX 970, latest drivers, 16 GB RAM, plenty of hard drive space P3D 3.4, latest version Zinertek VC upgrade

Since installing that latest Update from Level-D, when starting FSX-SE, error flag with this module, recommending not running it.Has anybody else who updated seen the same error flag when starting FSX-SE? http://fsfiles.org/flightsimshotsv2/images/2017/04/18/Level-DError.jpg

Has anyone ever experienced a memory leak after installing the 767 in FSX steam ed. ? Trevor

hello, i have done everything, but i can not get into the members section of the level D forum i get this message, "Only members with sufficient permission can access this page" i have registered the product but it says that the certificate is already registered. still can not get in. any ideas?

I purchased LEVEL D 767 many years ago and threw the files in the bin months ago since it was not compatible with any platform. Now there is an update but the purchase is not anymore on m Flight1 order list. Can you suggest a way for me to retrieve the whole thing. This was a milestone at that time in large jets

Anyone heard anything about this..seems to have been ages.not that much different from the 767.is it still an ongoing project? steve-0

Hi all, Just a quick question, Will the Level-D 757 when finally released include the series 300 or will it just be the series 200 only?. If one of the team is able to answer this question that would be great. I did post this on the forums at level-D a while back but got no response. I have also read this is near completion and we may see some news regarding Level-D by the end of this year 2013 perhaps? Fellow simmers please let's not make my question turn into a "it wont be released slanging match", I am waiting patiently for a long time for this beauty and I am a firm believer it will be released eventually. Thanks to everyone and the team …

Just Finished recording a brand new and improved repainting tutorial!!! I hope you enjoy them more than the first set, and as much as I did making it. Parts 1-4 are down below!! Part 1: https://www.youtube.com/watch?v=lnMRvnTQNuU Part 2: https://www.youtube.com/watch?v=OD-yQ97DQ4M Part 3: https://www.youtube.com/watch?v=A8Oa8d1NFSU Part 4: https://www.youtube.com/watch?v=pJYD49UWd18

I am currently remaking the painting tutorials for the Level-D paint kit. This will also work for most other kits as it explains basic controls..etc!! Enjoy Part 1: https://www.youtube.com/watch?v=lnMRvnTQNuU

Hello flightsimmers, To those of you who would like to use their beloved Level-D 767 in Prepar3D v3.2 with the ability to access and modify the Level-D menus, I have created a video tutorial for you. Here is the link: I hope it will be helpful to you. Have fun watching!

Has anyone got this working in v3.3.5? I have major stutters every 1-2 seconds in any aircraft, including on the start page. Only uninstalling the 767 clears the problem.

Hi, everyone, FSX:MS=original MS version of FSX FSX:SE=Steam version of FSX I want to report that I succeeded in installing the Level-D 767 in FSX:SE. I have a dual FSX:MS & FSX:SE setup. I started the install file, and pointed it to the correct FSX:SE folder. After install, I needed to copy the entry for the Level-D from the original FSX:MS DLL.XML file (in C:\Users\[Your Name]\AppData\Roaming\Microsoft\FSX) to the FSX:SE DLL.XML file in ...\FSX-SE . You might want to back up your DLL.XML file in FSX:SE just to be on the safe side. I did a loop around SFO and an autoland at R28R w/ no real issues except that I had to tell FSX to turn on my joystick.…

Hi recently had to uninstall Level D767. I am operating windows7 and I also have Norton security installed. When I tried to re-install Level D767 everything installed apart from the panel. Norton picked it out as a virus in the panel. So I uninstalled and then disabled Norton and tried again but as soon as I enabled Norton it remedied the virus in the panel and I still can not see any instruments in the aircraft cock-pit panel. Has anyone encountered this problem.

Hello Simmers, and hello all of Level D fans. I read this on the Level D forum! "The Level-D is a joy to hand fly and has a very accurate flight model according to real 767 pilots on the forum" ???? :wink: First off all this is a remark about the 767 Level D from a first retired pilot after thousands of flight hours on this aircraft. The APU starting time is too long, normally faster. The engine spool up at the start, not realistic. And the least realistic thing is the aerodynamic drag of the spoilers, and this can be easily corrected by modifying the air file by AirED program. First make a backup of your air file. Open this air file whit AirED and open 11…