The Level D 767 | Wilco PIC 767 Forum
Do you own the Level D 767 add-on for FS9 or FSX? Do you own the Wilco published 767PIC add-on? This is an UNOFFICIAL forum for both. Please do not expect the publishers to assist you here. This forum is established for owners to share hints and help and for non-owners to ask questions of the owners on performance, techniques and guidance.
4360 topics in this forum
-
Please help me out here.. I have been using Level-D 767 "s in fs9 for many years..no problem with install liveries...However I purchased this beautiful bird in FSX and I can see the installed planes the repaint manager..I just put the files in the download directory and I can still see the liveries in the manager but in FSX itself they are nowhere to be seen....I have no idea ..somebody got the solution for me? Thanx
-
Have Level-D for FSX since 2007 but started recently flying with it since my new SB system build can handle it and switched to 100% FSXAfter happy years Level-D 767 VA flying in FS9 I encounterd serious problems with the FSX version.Looking in the Level-D forums for solutions gives me another look and feel about the Level-D support and the fact that Level-D was a king in the old FS9 days but since FSX becomes the joker.I have a problem with bounching 767 after filling the FMC and specially the Cost Index. This one is starting the bounch and even while flying the plane goes nuts.Also the SID/STARS went away or only half so using VNAV is also impossible...I saw a very longg…
-
I had to do a complete reinstall of the 757 and Ive had this problem before, there was a file that you would have to add in order to keep the plane's wings from piching up and down doing flight I just don't remember the file name, help !!!!Alvin BNewark N.J
-
-
Hello to everybody,i have a problem with my levelD since i have reinstall my system from vista to w7 ultimate.The repaint manager have a bug.When i load it i'm no able to install a repaint ,it start very well but the message telling that your repaint have been successfull intalled don't appear,i'm obliged to close the repaint manager after five or seven minute.With vista there was no problem.I want to remember that i have done an intirely installation of seven and not an upgrade unto my computer. Thanks for help.
-
- 1 reply
- 2k views
-
-
Hi Guys!I have bought the brilliant LD767! I am trying some single engine flying but the rudder stops working( CH Pro pedals )as indicated on the status page? Any one any ideas? Also, is it possible to increase the rudder authority in the same way as you could on the PIC767?Help would be much appreciated!!:-( RegardsIcan
-
- 9 replies
- 2k views
-
-
Can anyone tell me why not all the switches work in VC? Some do an some don't!
-
- 1 reply
- 1.3k views
-
-
Hi! Could you please give me some decent sound settings for the LevelD 767? How should the sliders be set in order to achieve the most realistic sound effect? Thanks in advance!
-
- 0 replies
- 1.1k views
-
-
Hi guys! To get to the point; the level d 767 is great, but there is something what is putting me off, and has put me off for the last two years of owning the LVLD. Basically the sound is not in synch with the EICAS N1 instrument i.e when the engines spooling up. However the sound is in synch with the EICAS EPR instead. For example, when you accelerate the throttles, the EPR pointer moves up in synch when the throttles are pushed, however it takes time for the engines to spool up to match the EPR pointer, as the engines cant accelerate in such rapid time. The engines sounds on the LVLD is doing that, matching the EPR pointer instead of the actual N1 engine displa…
-
Can anybody kindly point me towards the old Britannia Airways colours. I have searched high and low,and have not managed to find anything for FSX? Plenty for the FS2004, but I'm after the FSX version. I have the Thomson repaint for FSX but was looking for the older repaint. Thanks.
-
- 0 replies
- 1.1k views
-
-
Got an upgraded pc and re-installed FS2004 and a zillion addons.Under Windows 7 it takes a while but patience rewards us.I re-installed the LevelD 767 (got it as a download from Flight1) with the latest update.Also Installed the FS2Crew for it.It was working fine until today. I loaded a cessna hit Fly and at the airport loaded the 767.Got an error message that msfs has encountered a problem and will restart.This repeated itself many times. (all other addon aircraft are ok btw). Didn't matter which repaint I chose.The only suspicion I have is the repaint manager utility, which I used to add some new textures-Varig, Qantas, Aeromexico, KLM, and British Airways. The origin…
-
- 1 reply
- 1.3k views
-
-
-
Hello, i fly with 767 for fs9 and have made some observations of this plane, and it would be a great addition if: 1.All of the lights could work separately, becouse if i want for example to set wing lights on, i need to set position lights on also, or they will not start, in FSX i has been woked out i believe. 2.Drag/ thrust required messages added, like in fsx version. 3.Terrain override switch added. 4.Ability to set mods for analog artificial horizon along with the caging device for it. 5.Im not sure if this is a problem but vnav behavior is uncertain in some cases like: -Shouldn't VNAV shut down at the end of route, maybe go into altitude and speed hold ? -VNAV descen…
-
- 1 reply
- 1.2k views
-
-
For some reason when i engage or turn on my auto pilot, such as CMD L, OR CMD C OR CMD R, And i turn on my hold altitude button or vertical speed button, The aircraft doesn't descend or ascent neither, please help because I can't keep hold of the yoke during the whole flight. :(
-
- 1 reply
- 1.3k views
-
-
Hi Guys;Don't know if anyone can help me but when flying the Level-D 767 the autopilot has been disconnecting several times in the cruise mode. I am operating with Windows 7 I also have a Saitek Proflight yoke system. The problem dose not happen when I fly regular Aircraft in FSX. When it happens I have to click on the mode 1 on the Autopilot panel.Any help will be appreciated. Harry
-
- 3 replies
- 2.2k views
-
-
Hello... i have reinstalled lvld 767 x sp2 i believe.... but i also have the winglets version.. and FSCREW what is the best way to proceed ???Thanks in advanceSteve
-
- 1 reply
- 1.2k views
-
-
I just re-installed the 757 from CS that I bought during one of their sales. Flew it around the patch and then form SEA/TAC to LAX.All I can say is I can't wait for your product. There are so many little things that just don't work right on the 757 from the other publisher that I know will be correct on the Level D bird. Hope sooner rather than later.Colin
-
- 3 replies
- 1.9k views
-
-
Hi i have done a autoland before in a 757 but it was a while ago can anyone help me just recap on what i need to do to autoland??
-
- 0 replies
- 1k views
-
-
HiI'm thinking to buy fs9 LevelD B767, but before purchase I want to know is it possible to run LevelD 2D panel on resolution 5292x1050. I'm using 3 x 22'' monitors and ATI Eyefinity 6.ThanksEdin
-
- 0 replies
- 1.2k views
-
-
Using FS2Crew Voice Commander and not using FS2Crew as well,any reason why when trying to engage VNAV at the gate along with FD,A/T,LNAV, or even after 400 feet in take-off as per the flowsheet,it steadfastly refuses to engage.No such problems with LNAV.Instead have to resort to FL CH to climb to FMC-set altitude.And oddly enough,the VNAV page shows a Step To climb of 37k if cruise has been set to 35k,not long into a flight when I know fully well that I have a full fuel load so it effect should not even be stepping to that altitude level.Any pointers? Thanks.
-
- 2 replies
- 1.3k views
-
-
Hi Everyone,Just a heads up to all you Level-D 767 fans, McPhat Studios has created HD textures for this wonderful bird and we have an opportunity to get American Airlines textures. Here's how we can do it, we need 80 members to join the Level-D 767 community created by McPhat Studios a link has been provided below.http://www.mcphatstudios.net/groups/level-d-767-hdtLets get to 80+ and get the American Airlines HD textures.Thanks
-
- 4 replies
- 3.8k views
-
-
hello folks im having trouble loading a simroutes flight plan into level d.i generated a routes and loaded the plan into the level d folder navdata\ flightplans in vista , but the fsx fmc will not reconize.sim routes says to load the rte file into fms by clicking the route button on the fms and then click the third button on the right which is the co routes. and then hit the exec button.not happening.im sure im in the right directory in vista.program files \ microsoft\ fsx\level d\navdata\flightplans in vista.what am i doing wrong , perhaps the wrong folder.thanks........Robert
-
- 1 reply
- 2.4k views
-
-
Where do I go again? Daryl, aren't you sick of doing this yet? :Big Grin:They should lock this forum.
-
- 2 replies
- 1.1k views
-
-
Hi guys,I got the LDS 767 recently and i seriously am in love with it , its a wonderful aircraft with great dynamics!I has a little issue , When i takeoff and engage autopilot and the autothrottles , they work perfect , but whenever i manually move my joystick and the throttles , Autopilot seems to disengage , as in it does not disengage , but like if i turn my joystick rightward and leave it , the aircraft keeps on banking right , i.e the autopilot doesnt seem to have control anymore , but the CMD light is on!!I have a small sister , and during long haul flights she sometimes fiddles with the stick , the autopilot doesnt behave like this on most aircraft but however it d…
-
- 1 reply
- 1.2k views
-
-
i dont know why but somehow, from one day to another , messages on eicas turned to a big size,,i.e "PARKING BRAKE" waslegible now appears like this "PARKING BRA" i can't read the full message,,please help,,i already webt to the leveld forum site and i registered myself but i can't have any help cause i am a new one,,,so please if somebody can help,,thx!
-
- 1 reply
- 998 views
-