The Level D 767 | Wilco PIC 767 Forum

Guys,Could I throw out a bizarre request for a plain white 767 repaint with the registration 'G-TEVX' (and a little Union Jack next to the reg)Many thanks and best wishesCJ :( :(

pm me if you have it.Thanks,

hello,I have the 767 for FSX with SP3a installed.I 'm on a flight at FL350 LNAV and VNAV on cruise.And suddenly VNAV disconnects and SPD reconnects.I'm very far from T/D point.Please, do u know which event can automatically disconnect VNAV ?Thx.Gilles Menghetti.

Hey guys, I was wondering if any other level-d pilots out there have this problem... On almost every flight I make, the autopilot pitch control seems to somehow malfunction regardless of mode (VNAV, FLCH, ALT HOLD, etc) once the FMC-programmed descent has started. The light will still be on however the autopilot is not actually flying the airplane. I can move the pitch controls freely with the joystick and the mode will stay engaged. Also, the flight director pitch bar will follow the aircraft position (ie if I pitch up 20 degrees, the flight director bar will go up to 20 degrees). The FMS modes and route are properly set and descent rates chosen are reasonable. Fuel and …

How can I tell what version number and what updates , if any, have been installed on my computer for my Level-D 767-300. It's been so long I cant remember and to run a certain ATC program it says that I must have the vr 3 update installed? Thanks, jerrycwo4

hii

Hi, I am looking for a repaint of the Royal Air Maroc for FS9, for my sexy LevelD 763! As Avsim is currently down on the file downloads!Kind Regards JamesQC/Canada

Hi Everyone,I don't know if this has been asked already, but I wanted to know if it is possible to recreate this: In the video, the pilot is practicing takeoffs and landings in the 737NG. In the description, he mentions that the instructor had them draw a 3 mile circle around the airport (KSMF) and stay within/near it in order to maximize the number of Touch-and-Go's during the hour that they had the aircraft for.It would be nice to do something like it for training in FS. I know for sure I need the practice!-Ramon

hey, i was just wondering if flight1 or level d are going to be releasing a box edition of the fantastic 767 for FSX? i have seen the fs2004 version boxed many times and i prefer to have hard copys than downloads. if so any word on a release date?? thanks very much for any help, Philip

Good day fellow simmers.I wanted to post this question in the Level-D official forum but I get this message: >"Error Only members with sufficient permission can access this page."<So I'll ask here. I have had the boxed version of the LDS763ER for few years (the one with the justplanes video:-). And have never experienced this before:But the autopilot disengages itself randomly at cruise. Sometimes I have cruised for quite some time, but sometimes it happens just after reaching cruise level. I have never had this happen in climb or descent. And because of this I can not use the plane. I also have the PMDG747 and PSS777 (both the boxed versions) and it never…

UI have had this problem for wuite a while and I am stumped as to why it started happening. On capuring the ILS for no matter what airport intead of turning on the heading that I programmed for the runway the plane turns 180* the opposite direction. These runways are not backcourse headings and I do not have the BC switch on. This has been happening for months now. Anyone else has or had this prob and have any idea how to fix it?

I am interested in getting the LDS 767 and would like some advice. This is the PC I will use for it: Quad core i7 2.66, GTX285, 4Gb DDR3 RAMI want to use it in FSX/Accel or FS9, with WinXP (32 or 64 bit, havent decided).Can anyone tell me whether it would be viable in FSX, and which OS would be best.Also, is there a way to get them together (FSX and FS9 versions) on CD or do I have to get them separately.Is it only the ER that is modelled, or does it include the normal -300I have no doubt that it is a magnificent rendition of the 767, I just want to know whether I can run it.Thanks for any help

see my videos in youtubei hope you like ithttp://www.youtube.com/results?search_type...mvc340&aq=f miguel

Hi to all in the LEVELD 767 i

I was just wondering since where all here to simulate why cant we get a shared cockpit with LVLD767, is there a mod that we can use to get fsnet to work, or are you guys on the development team working on a great feature like this for your upcoming release/update?

Hi All.SIDs, STARs and IAPs for the US and UK area are available for free at http://planepath.com/html/lds.html . These procedures, for over 1600 airports, are made from FAA and NATS current cycle data (0904) and are updated every 28 days. Come visit and see what is available.EnjoyTerryPlanePath.com

Hi all...I recently flew a flight and the ILS didn't set automatically (the frequency was in the FMC, but it didn't transfer and it never went active, nor could I set it manually. What am I missing? Thanks..Bob

I posted this on the FS2004 forum also.I'm not sure that this is the right forum to ask, perhaps I should ask on the aircraft specific forums. Let me know. I want to get the Kai Tak IGS 13 approach in both my PMDG 747 and my Level D 767. Can anybody help with a link and some info on where to install it? I also understand that there is some nice freeware terrain and airport. Also, I notice that VHHX which I think is the designator since Kai Tak closed is Not in the database. VHHH, the original ICAO ident is now the new Hong Kong airport ident. Any help and links to SIDS, STARS and approach, as well as terrain with some suggestions on how to install will be appreciated.Than…

I'm familiar with installing Level-D 767 repaints in FS9 and just bought the Level-D 767 for FSX. Can someone direct me to where I can find information on how to install repaints please? In the the FS9 version there was an aircaft folder where you downloaded repaints to but I don't see one in FSX. I opened up the Paint Manager and it showed one repaint but when I selected it the preview won't show and the program hangs up. Any info would be deeply appreciated.Sincerely,Hans

Greetings everyone from Spain!!I love the level-d 767. I am currently learning all there is to learn about the airplane but I have run into the same problem twice in two consecutive flights.I use Aerosoft FOC to plan my flights and save the plans as *.pln for Radar Contact to understand. The problem arises when I'm approaching the destination airport. ATC orders me to descend to various altitudes but it doesn

Hi just wondering is there a freighter of the leveld 767,if so where can I get it?Alexei

im sorry to ask in this forum but perhaps you folks can tell me whats wrong, over at the level d site i cannot log in on my desktop computer, but i can log in on my laptop.i will log in and it will say that i have successfully logged in , but when i try to navigate around in the site it will say i need to log in.on my laptop i can go where ever i want.Thanks.....................Robert

Hi all!Does anyone know how to use the 767 with the MAP! software by feelthere? There usually is that little MAP button that shows up right away, but it's not there. I also tried to access it via View->extended flight info, which normally works fine, but the menu entry has disappeared. Any help appreciated. Thank you!

Is there a way to be able to display BOTH the Captain and FO panels AT THE SAME TIME? That way I can drag the FO panel to the monitor on the right and keep the Captain panel on the left monitor.Thanks in advanced!

Here's my scenario:I am approaching KSFO 28 R in a Land 3 autoland. I have my holding pattern programmed in the FMC. Now, according to the Level D 767 Angle of Attack DVD, the GA mode is automatically armed when flaps 1 is selected - when the G/S is intercepted. However, on my scenario, when I select flaps 1, there is no indication that G/A is armed. Also, in my scenario, after I have selected flaps 1 and pressed the G/A mode does not commend the AFDS autothrottle into a 2000 fpm climb (it's more like a 200 fpm climb).So, in my given scenario, how to I perform a correct autoland (using the autopilot commands).Thanks,RH